Have the same four wheeler and I'm on the second new carburetor I can't seem to get them to stop curling fuel out of the carburetor Reservoir and a little cut off Bolt won't loosen or tighten with the new carburetors they seem stuck am I doing something wrong
I have a Hawkeye 300 that won't rev up. It will idle only sometimes when it gets warmed up, but then backfire through the carb when I give it throttle. Replaced the carb, set the valves and spark gap. Honestly at a loss, any help is appreciated.
Hey, I have the same atv and my carburetor choke will not work at all, it just stays down. The cable is good and is not frozen but the choke just won’t seem to work, do you know what could cause this
Hello I have this same fourwheeler and whenever I I the gas on it immediately begins flowing gas out the overflow nipple on carburetor. I thought maybe the carburetor had an issue I couldn't fix after pulling it apart and replacing needles and jets. So I ordered a brand new on. Same thing, as soon as I turn the gas on it flows gas put the bottom of carburetor
@@MobileWrenches ah man turns out I'm just a huge dummy lol I never really messed wit a carb b4. The guy I bought this fourwheelwr from had it hooked up wrong. When I bought a new one I was jus going off what was already there so I hooked the new one up same as him, wrong lol. I got it all worked out man thanks tho
@@demetricmallory8407 remove the air box air lid see if it runs better if yes not getting enough air " causes" carburetor boot dirty filter stopped up breather pipe valves need adjusted or cam lobs worn out ..if it don't help put lid back on then try running it with choke on if runs better with it on its not getting enough fuel adjust mixture screw or check petcock or fuel lines for obstruction check fuel filter check Petcock some have filters inside the gas tank.if it's not ideling good your mixture screw is out of wack .usaly 1/1/2 turns out from lightly seated is a sweet spot .sometimes it take 2 to 2 1/2 out less then 1 need to rejet pilot jet down if bogsbir misses at more then 1/4 throttle check needle jet in main jet try moving clip up a notch full throttle cutout rejet main jet .up size about 5 numbers example 135 go to 138 or 140
What symptoms did it have that led you to do this?
Good Video! what size tires are you running on then front of your atv?
Have the same four wheeler and I'm on the second new carburetor I can't seem to get them to stop curling fuel out of the carburetor Reservoir and a little cut off Bolt won't loosen or tighten with the new carburetors they seem stuck am I doing something wrong
thanks!!............I thinku just fixed my old Kawi !!
I have a Hawkeye 300 that won't rev up. It will idle only sometimes when it gets warmed up, but then backfire through the carb when I give it throttle. Replaced the carb, set the valves and spark gap. Honestly at a loss, any help is appreciated.
Hey, I have the same atv and my carburetor choke will not work at all, it just stays down. The cable is good and is not frozen but the choke just won’t seem to work, do you know what could cause this
Hello I have this same fourwheeler and whenever I I the gas on it immediately begins flowing gas out the overflow nipple on carburetor.
I thought maybe the carburetor had an issue I couldn't fix after pulling it apart and replacing needles and jets. So I ordered a brand new on.
Same thing, as soon as I turn the gas on it flows gas put the bottom of carburetor
You float is not right
@@MobileWrenches ah man turns out I'm just a huge dummy lol
I never really messed wit a carb b4. The guy I bought this fourwheelwr from had it hooked up wrong.
When I bought a new one I was jus going off what was already there so I hooked the new one up same as him, wrong lol.
I got it all worked out man thanks tho
@@MobileWrenches I have that same one also, but mine want build power. When I hit the gas it floods out and backfire.
@@demetricmallory8407 remove the air box air lid see if it runs better if yes not getting enough air " causes"
carburetor boot dirty filter stopped up breather pipe valves need adjusted or cam lobs worn out ..if it don't help put lid back on then try running it with choke on if runs better with it on its not getting enough fuel adjust mixture screw or check petcock or fuel lines for obstruction check fuel filter check Petcock some have filters inside the gas tank.if it's not ideling good your mixture screw is out of wack .usaly 1/1/2 turns out from lightly seated is a sweet spot .sometimes it take 2 to 2 1/2 out less then 1 need to rejet pilot jet down if bogsbir misses at more then 1/4 throttle check needle jet in main jet try moving clip up a notch full throttle cutout rejet main jet .up size about 5 numbers example 135 go to 138 or 140
Well that was a easy fix no money involved.
Where does the big clear house from carb hook to?? Plz help
i can’t find a way to put the choke back on
me neither.
Thank you sir.
Traducir en español porfavor