proper maintenance makes for longevity. clean your GBB after every game, also clean and lube it before every game. loctite every screw that you don't want to become loose! Marui glock 17 lower with guarder hammer set, WE upper with maple leaf hop up housing, bucking and tightbore inner barrel, magazines with WE seals and high flow valves. Acetech lighter as the tracer unit. Inspect the parts for wear after each game, replace as needed or as "needed" (in case you "want that part"). Regards, a pistol main CQB wanker ;)
Just received my we g19 brand war t1. Really exceptional quality. Brass outer barrel stock. Metal trigger stock. Fiber optic sights. Stock. Maxwell plate stock. Compared to the stark arms g19 it's replacing there is no comparison. The trademarks were really nice but the material quality. Not to mention no nozzle spring or Locke spring. Upon arrival. The we is just an exceptional piece. Really very pleased. As there are no videos of this gun yet I may be the first to do one. Tm/We. There are no substitutes.
You can get steel slides, but I would not recommend them honestly for skirmishing purpose due to the damage they will do. If you want to increase the felt recoil with the guarder slides, get a tighter seal in your BBU (upgraded piston and tighter loading nozzle) and get a 130% recoil spring, not 150%. WE is releasing C02 mags, but according to forums, they put out the same fps as gas..so not sure about that yet!
Yea you either need to bend the trigger back in place which is pretty easy, but the problem is it will bend back over time, if that annoys you, you can grab the Guarder Steel trigger bar that I mention in here, it will fix the problem for a very very long time lol :P
Oh man, it required a lot of fitment for my TM. As for the BBU section, AIP was a drop in. What required the fitment was the actual slide to frame and the barrel.
Need more information on that bud, but from tightening up, it sounds like the frame is loose, I would check your grip, I mention it in the video (first item)
I can't actually remember the make of it, but there are a good amount of copies out in the market. As for the slides, if you want it to last longer, Aluminum easy, steel will run its life out quicker (front post/rear post). And good luck with it! :)
do you have a video on TM G18 disassembly/Assembly? For the most part i understand the slide but not how the frame is set up. confident in doing the work just never taken apart my TM before. Up untill now my teching has been on my Custom G&P WOC.
what optic mount on the Tan Glock? Overall look Reminds me of the KP-40 in BLOP2. Aluminum or Steel Slide for TM G18C? Could you still get good performance with the heavier steel. Rate of Fire dosen't matter much too me, i only use the selector if desperate/intimidation or fun. I wasn't a glock guy till I bought a TM. Now I'm a Glock/1911 fan.
thanks. watched yours and another guys video as well. i have a better understanding now. now i just need an Allen key for the Guns Modify SAI Trigger. i need to buy some more tools.
Would a PGC slide made for a TM G17 be able to be put on a WE G17 with little to no work? I've heard the WE glock is a TM clone, but I want to be certain that the slide will fit.
My G18C hammer broke. After attempting to fix it with jb weld (it didn't work btw) i went to you videos. What do you recomend i do? Buy a new hammer or just get a whole new lower from evike? Btw its a WE, i know stupid for buying WE. Also where could i find a new steel hammer (preferably one of those modify zero hammers)
I finally got a TM glock used and for some reason it doesn't blow back sometimes when I shoot. What is causing this it looks like the top of the trigger bar is bent like 5* to the left.
Cool, do you know which upgrade slide is the heaviest because I have noticed lot of the guarder slides are aluminium and don't provide you with the greatest ammount of recoil.
i have a we g18c and i KJW Glock 23 or 32 not sure but could you tell me some parts i could get for both to increase FPS and reliability of the guns so they dont brake especially the WE g18c cause it has full auto. thx
Well i meant more the trigger has a lot of play and sometimes get light striking on the mag and also have a problem everynow and then the trigger doesnt engauge the hammer?
23, tightbore and bucking just like I said in the video, as for the weg18c, the barrel breaks and the loading nozzle breaks, id recommend replacing the metal guide rod inside the bbu with something softer, or doing the g17 mod, check out my glock playlist ^_^
give you the heads up I got my nozzle and the g17 fired and cycled but after a couple of shots the dummy extractor flew off the slide. no idea why but I can't seem to get the extractor to stay on. also a piece of the angel custom rocket valve popped out and fell out of my gun. good news is I was able to insert it back on the valve but it wasn't easy. any ideas as to what I can do with the extractor to get it to stay on the slide?.
Will the UAC steel hammer and sear for the Tokyo marui Glock 18c fit the WE Glock 18c? Same for the fire pin as well? Would be nice if you could get rid of the zinc parts and replace them for steel...
Do you have pics of the JB weld screw post mod? Space is tight in there - I assume you JB welded the void under the screw post and around the serial number plate. For the rear post, is there any hopes of reinforcing that on a stock frame?
Can u do a review on Future Energy Glock upgrade parts evike just got in? Im currious about them bc i've never heard of them, and my budget is too low for anything expensive for my pistols. Keep up the good work man!
Oh you betcha man, they are releasing almost enough to make a full glock, I'll be doing another of my 100% builds with all of their parts. Already a big fan of them, good to see another Guns Modify fan, should be a lot more!
Great video, helps a lot.. just if you could make a list of the upgrades in the descriptions would be great you dont have to put links just names and brand would be great... Thank you
What barrel would fit on a WE G17, borke mine, what nozzle would you recomend? i've got 150% recoil and hammer spirng form angels customs, had to sand down the Blowback housing too, so i would like to get a light one,
I am working on a salient arms tm g17. I got myself the frame from aps and its stippled I got a guarder slide with the salient trademarks and designs and finally I got a guns modify steel barsto barrel as well as a set of uac fiber optic sights. now earlier you mentioned on your video that you wouldn't recommend mix matching barrels. here is my question what if a certain brand doesn't have a barrel that goes with a certain style you are trying to build? I have a guarder slide and guns modify steel outer barrel and they are both salient arms style. would they still work on the glock I am trying to build or would this cause problems with cycling and other issues that would eventually build up over time? I am really curious. Oh yeah one thing to note I have never really owned a TM stock glock pistol I had a WE at the start then I moved on to APS then I decided to build my own. I had to use some small parts from the we to get the custom pistol to work like the slide release the screws and the safety plate which I had no luck finding online anywhere else. Also since I have the guarder slide I bought the hammer set and trigger housing and the rail mount all of which are steel reinforced. Are there any compatibility issues with those say if I had to go with a with another brand of slide and barrel which are also salient arms style say if I have issue with the guarder slide? really curious as to what I would need for my salient arms build. I pretty much got all of the cosmetics but the internals i still need to work on.
Hey dude I have lost the rear sight screw on my TM glock so the selector base, the selector itself, the selector cover and the screw (obviously lol) fell out which made me lose the selector base spring, the rear sight screw and the selector pin (i saw the selectors had pins in them and mine doesnt anymore). Where can I find replacement for each and every one of these parts? Looked onlin but could not find anything that is either original tm part or upgrades... Thanks!
Well i have a couple questions:1- what gloves are those? They look sick!2- whats your beef with 5ku?3- whats the problem with nineball buckings?4- i have a we glock that shoots fine on semi, but locks back after the first shot on full auto. I reassembled the whole thing and it looks fine except for the hammer and rotor (previous owner juri rigged a 7mm bearing in it with a roll pin). Where should i look to fix it?
Right forgot about another one: the same glock has a couple light strikes after the mag is totally filled, should i look into replacing/upgrading the hammer spring?
Since this video is a few years old I figured I'd ask. For my WE G19, I'm getting a PDI 6.01 barrel and a maple leaf purple bucking. I want to make my pistol more gas efficient and accurate. What else would you recommend?
Hey I own a WE Glock 19 and i was just wondering if any of these upgrades in video would work for my glock 19. If not, then can you point me in the direction of where to buy upgrades for my gun. *Im interested in internal upgrades by the way*
Would you recommend any of the poseidon ice pick products, I'm considering the flute valves for higher /more consistent fps, should I go with the ESD valves by maple leaf? Or not worry about the valve at all and just upgrade the piston head? Also do you recommend maple leaf autobot buckings
does the glock 17 stuff fit in the glock 19 or? because there’s a lot of parts out there for the 17 but it’s hard to find stuff for the 19 i really wanna fully upgrade my 19 for a training and playing pistol
Hi. please tell me whether it makes sense to change the internal barrel with a hop-up chamber (like maple leaf kit for example), or just enough of the barrel 6.01. Thank you. sorry for my english
i would just get the inner barrel/tbb, there is no need for the hop-up chamber til the original breaks. you will see a very nice increase in fps/performance from the tbb
pleas make adwanced thopics like blowback housing timing, high low output valve hammer valve, soft or hard recoil springs, nossle springs, ore diferent flute valves inside the nosssle
hey man i've been strugglin a lot to upgrade my "we glock 19" but i cant find the parts for it, can you tell me if there is any upgrades to make it look like the ATEi style?
just a quick question, do guarder upgrade parts for TM will fit WE gbbp? particularly guarder upgrade parts for TM into a WE glock 19 gen4. just new into gbb scene. thanks in advance :)
where do you get your parts, rear hammer assembly, steel trigger bar, enhanced air nozzle ect. I can't find anything except overseas, evike and other stores I've checked are always sold out.
I just hate buying parts from overseas because if you need something small and cheap you pay more in shipping. I live in Lodi CA and TNT Airsoft in town just got a contract with redwolf and he ordered a bunch of g series parts since both of his have been broke for a long time.
hi, ive bought an custom TM g18c lower frame can i use my WE g18c internals in the TM frame. would i need to change anything or is it an quick internal swop ?? any help will be greatly appreciated! !!
Hey man I was wondering what part would need to be replaced on a we g17 when the trigger response seems slower than normal? I have 2 we g17s and one seems to have what seems to be a normal trigger response while the other seems delayed/weak.
brigexplosion id check your loading nozzle, might have a slight crack, or it could be just dirty. also check your recoil spring and to see if anything is loose
So I'm wondering, do I have to do a lot of modification for a HK3P Glock lower frame to fit like gunsmodify or UAC parts? Like trigger bar, hammer etc etc, or would it be a close drop in? i'm on the fence on whether i should just get a Guarder or a HK3 frame... (or both)
+KnucklesGSM what upgrades would you suggest for a WE G23? and would you know if the UAC Aluminum Loading nozzle for the TM g18c would work on the WE G23 without having to mod anything or do any other fitment?
so i picked up a Detonator slide as well, same one you did and installed everything the way its supposed to be. but for some reason something keeps getting caught when i rack the slide back. Im running a guarder frame with stock internals but ive seen other vids with ppl doing the same so i dont understand why. pretty sure i installed the BBU correctly too. btw BBU is stock marui bbu also. any ideas why?
Would it be ok to run an extended inner barrel with the threaded external 5KU compensator, I'm wondering because of the outer barrel tilt and not being fixed to the said compensator or a silencer, also would running a 6.01 138 mm long maple leaf barrel be ok?
Great video buddy!! 👍✌️ if I may ask you a question: I have the we g17 , and I have upgraded the air nozzle with the angel custom one. My question is. Would it be ok for me to use a co2 mag on my G17 or should I stay away from it? By the way, the Co2 mag is made for the we G series.
hey good vid, is it possible to fit internals from a WE or TM glock into a Guarder frame and slide designed for KJW?, the reason i ask is because shopping around online (from the UK) WE and TM are the most common brands of Glock available however Guarder upgrades for WE and TM Glocks are almost never in stock!...with a little modification maybe? Thanks
Could you comment all the items you listed? Also, the upgrades you suggest, are they all compatible with a plastic slide? I have a TM G17 but I'm not sure if I want to upgrade it to a metal slide just yet...are there any upgrades I should avoid doing until I make the transition?
6 years later and this video is still very helpful thanks man
7 years
@@rxcharger10p45 10
5 years later and this comment is still very helpful thanks man
proper maintenance makes for longevity.
clean your GBB after every game, also clean and lube it before every game. loctite every screw that you don't want to become loose!
Marui glock 17 lower with guarder hammer set, WE upper with maple leaf hop up housing, bucking and tightbore inner barrel, magazines with WE seals and high flow valves. Acetech lighter as the tracer unit.
Inspect the parts for wear after each game, replace as needed or as "needed" (in case you "want that part"). Regards, a pistol main CQB wanker ;)
Just received my we g19 brand war t1. Really exceptional quality. Brass outer barrel stock. Metal trigger stock. Fiber optic sights. Stock. Maxwell plate stock. Compared to the stark arms g19 it's replacing there is no comparison. The trademarks were really nice but the material quality. Not to mention no nozzle spring or Locke spring. Upon arrival. The we is just an exceptional piece. Really very pleased. As there are no videos of this gun yet I may be the first to do one. Tm/We. There are no substitutes.
no links to upgrades???!!! cmon bro
Most TM G17 parts are compatible, but may require fitment due to it being a WE gun or could be a drop in
Just recently bought a WE G18, arrives tomorrow. and I am loving all your videos. Thanks for preparing me for breakage.
You can get steel slides, but I would not recommend them honestly for skirmishing purpose due to the damage they will do. If you want to increase the felt recoil with the guarder slides, get a tighter seal in your BBU (upgraded piston and tighter loading nozzle) and get a 130% recoil spring, not 150%. WE is releasing C02 mags, but according to forums, they put out the same fps as gas..so not sure about that yet!
Yea you either need to bend the trigger back in place which is pretty easy, but the problem is it will bend back over time, if that annoys you, you can grab the Guarder Steel trigger bar that I mention in here, it will fix the problem for a very very long time lol :P
Oh man, it required a lot of fitment for my TM. As for the BBU section, AIP was a drop in. What required the fitment was the actual slide to frame and the barrel.
Hey man, I love your videos for Hi-Cappa builds. They have inspired me to build my own custom Hi-Capa. Thank you
Theese Glocks are pretty sick! This video urges me to buy upgrades!
the optic mount could possibly be a Battleaxe Rail Mount if you are still looking for the mount.
can you show in detail how to reinforce with jb weld
yeah just did that and it works 100% now just need it to work for Red Storm East this weekend then I can actually fix it.
Need more information on that bud, but from tightening up, it sounds like the frame is loose, I would check your grip, I mention it in the video (first item)
I can't actually remember the make of it, but there are a good amount of copies out in the market. As for the slides, if you want it to last longer, Aluminum easy, steel will run its life out quicker (front post/rear post). And good luck with it! :)
Well it sounds like you might need to replace certain parts, I would just watch the disassemble video I have and see if there is anything broken
Ok, so it luck of the draw with the pistol then. How much is a lot of fitment, lots of filing and dremelling?
do you have a video on TM G18 disassembly/Assembly? For the most part i understand the slide but not how the frame is set up.
confident in doing the work just never taken apart my TM before. Up untill now my teching has been on my Custom G&P WOC.
thats up to you, only fact is, it has significantly less parts then the TM glock world hands down.
Hi there man ive just bought an old tm glock 17 just want to no wat parts to replace to tighten it up a bit?
what optic mount on the Tan Glock? Overall look Reminds me of the KP-40 in BLOP2.
Aluminum or Steel Slide for TM G18C? Could you still get good performance with the heavier steel. Rate of Fire dosen't matter much too me, i only use the selector if desperate/intimidation or fun. I wasn't a glock guy till I bought a TM. Now I'm a Glock/1911 fan.
thanks. watched yours and another guys video as well. i have a better understanding now. now i just need an Allen key for the Guns Modify SAI Trigger. i need to buy some more tools.
What gloves are those? Tryna find a good pair and they look perfect.
Would a PGC slide made for a TM G17 be able to be put on a WE G17 with little to no work? I've heard the WE glock is a TM clone, but I want to be certain that the slide will fit.
My G18C hammer broke. After attempting to fix it with jb weld (it didn't work btw) i went to you videos. What do you recomend i do? Buy a new hammer or just get a whole new lower from evike? Btw its a WE, i know stupid for buying WE. Also where could i find a new steel hammer (preferably one of those modify zero hammers)
TM blowback housings do not fit WE slides, they are wider than TMs
What would fit in we tech glocks?
What do you think of that tan guarder slide, how much modification would be needed on AIP internals to fit it?
I finally got a TM glock used and for some reason it doesn't blow back sometimes when I shoot. What is causing this it looks like the top of the trigger bar is bent like 5* to the left.
Cool, do you know which upgrade slide is the heaviest because I have noticed lot of the guarder slides are aluminium and don't provide you with the greatest ammount of recoil.
Have ypu ordered from AIP directly? As im considerig doing it but dont know what there post time and service is like.
i have a we g18c and i KJW Glock 23 or 32 not sure but could you tell me some parts i could get for both to increase FPS and reliability of the guns so they dont brake especially the WE g18c cause it has full auto. thx
Well i meant more the trigger has a lot of play and sometimes get light striking on the mag and also have a problem everynow and then the trigger doesnt engauge the hammer?
23, tightbore and bucking just like I said in the video, as for the weg18c, the barrel breaks and the loading nozzle breaks, id recommend replacing the metal guide rod inside the bbu with something softer, or doing the g17 mod, check out my glock playlist ^_^
On your desk is that a steel guide spring do you use it instead of the polymer one in your glocks?
What's the problem with 5KU?
The AIP Magazine lip needs some fitment? The bbs wont get stuck?
give you the heads up I got my nozzle and the g17 fired and cycled but after a couple of shots the dummy extractor flew off the slide. no idea why but I can't seem to get the extractor to stay on. also a piece of the angel custom rocket valve popped out and fell out of my gun. good news is I was able to insert it back on the valve but it wasn't easy. any ideas as to what I can do with the extractor to get it to stay on the slide?.
Will the UAC steel hammer and sear for the Tokyo marui Glock 18c fit the WE Glock 18c? Same for the fire pin as well? Would be nice if you could get rid of the zinc parts and replace them for steel...
great video👍👍 ever had glock 23 magazine issues needing to hold in when firing not feeding properly?
no sorry, sounds like you got the kjw, id check the magazine release
If the loading nozzle breaks, you can repair it with súper glue and sheets of soda can, I did it when that happend and it works fine
Do you know what's a good Glock adjustable trigger or at least how to make the "take up" on a trigger, lighter?
I just bouth the new Glock 19 from TM. Who do you think will be releasing upgrades (slide, hopup unit, outher barrel, reinforced nozzle, etc...)?
Do you have pics of the JB weld screw post mod?
Space is tight in there - I assume you JB welded the void under the screw post and around the serial number plate.
For the rear post, is there any hopes of reinforcing that on a stock frame?
cant do much about the rear sadly, as for the front you are correct
what web site do you shop from or stores? you are the only person I am willing to take any information from at this point.
Do you think that a kwa glock 18 is worth upgrading?
Can u do a review on Future Energy Glock upgrade parts evike just got in? Im currious about them bc i've never heard of them, and my budget is too low for anything expensive for my pistols. Keep up the good work man!
Oh you betcha man, they are releasing almost enough to make a full glock, I'll be doing another of my 100% builds with all of their parts. Already a big fan of them, good to see another Guns Modify fan, should be a lot more!
KnucklesGSM are upgrades for the we g17 the same for the we g18c, even though it has fully auto, like the barrel, receiver and slide?
Great video, helps a lot.. just if you could make a list of the upgrades in the descriptions would be great you dont have to put links just names and brand would be great... Thank you
What barrel would fit on a WE G17, borke mine, what nozzle would you recomend? i've got 150% recoil and hammer spirng form angels customs, had to sand down the Blowback housing too, so i would like to get a light one,
Which loading nozzle should i put in the g23 and what others glocks have the same loading nozzle as the g23?
Question: Just got a We glock 17 what parts are compatible for them
I am working on a salient arms tm g17. I got myself the frame from aps and its stippled I got a guarder slide with the salient trademarks and designs and finally I got a guns modify steel barsto barrel as well as a set of uac fiber optic sights. now earlier you mentioned on your video that you wouldn't recommend mix matching barrels. here is my question what if a certain brand doesn't have a barrel that goes with a certain style you are trying to build? I have a guarder slide and guns modify steel outer barrel and they are both salient arms style. would they still work on the glock I am trying to build or would this cause problems with cycling and other issues that would eventually build up over time? I am really curious. Oh yeah one thing to note I have never really owned a TM stock glock pistol I had a WE at the start then I moved on to APS then I decided to build my own. I had to use some small parts from the we to get the custom pistol to work like the slide release the screws and the safety plate which I had no luck finding online anywhere else. Also since I have the guarder slide I bought the hammer set and trigger housing and the rail mount all of which are steel reinforced. Are there any compatibility issues with those say if I had to go with a with another brand of slide and barrel which are also salient arms style say if I have issue with the guarder slide? really curious as to what I would need for my salient arms build. I pretty much got all of the cosmetics but the internals i still need to work on.
+Juan Leonor if you can fit it, go for it
Hey dude I have lost the rear sight screw on my TM glock so the selector base, the selector itself, the selector cover and the screw (obviously lol) fell out which made me lose the selector base spring, the rear sight screw and the selector pin (i saw the selectors had pins in them and mine doesnt anymore). Where can I find replacement for each and every one of these parts? Looked onlin but could not find anything that is either original tm part or upgrades... Thanks!
Alright I found out it's proprietary... Do you know if it all is proprietary or only some? And if not what would you recommend for upgrades if any?
What model / make is the glock in the front/ first one you held? Thanks for any info.
@KmucklesGM hey sweet videos. Very informative and helpful. I wanted to ask if I could do any upgrades to my elite force Glock 18c?
Well i have a couple questions:1- what gloves are those? They look sick!2- whats your beef with 5ku?3- whats the problem with nineball buckings?4- i have a we glock that shoots fine on semi, but locks back after the first shot on full auto. I reassembled the whole thing and it looks fine except for the hammer and rotor (previous owner juri rigged a 7mm bearing in it with a roll pin). Where should i look to fix it?
Right forgot about another one: the same glock has a couple light strikes after the mag is totally filled, should i look into replacing/upgrading the hammer spring?
Hey, I have a WE G18c and the hammer on it broke and I cannot find a replacement anywhere. Do you know of any aftermarket hammers that are compatible?
AlCapone try airsoft global.com or try evike
try posideon upgrades in the UK (out of JKarmy.com)
Do you know to replace rear sight kjw G23? I mean what brand
Since this video is a few years old I figured I'd ask. For my WE G19, I'm getting a PDI 6.01 barrel and a maple leaf purple bucking. I want to make my pistol more gas efficient and accurate. What else would you recommend?
Hey I own a WE Glock 19 and i was just wondering if any of these upgrades in video would work for my glock 19. If not, then can you point me in the direction of where to buy upgrades for my gun. *Im interested in internal upgrades by the way*
Would you recommend any of the poseidon ice pick products, I'm considering the flute valves for higher /more consistent fps, should I go with the ESD valves by maple leaf? Or not worry about the valve at all and just upgrade the piston head? Also do you recommend maple leaf autobot buckings
i still havent been able to buy all of their products to test, it will take some time. i like the maple leaf autobot buckings for sure though!
Any tips on the TM G26 advance when running on propane?
Not sure if alloy slides are an option for that gun... It is my fave glock though!
What are your favorite aftermarket slides for a G17?
where can u buy that stuf or some Page that have some of that stuf , i searched for upgrade parts but most of them are gor Hi cpa
Hi there, where can I order the glock trigger bar in your video. Thanks
does the glock 17 stuff fit in the glock 19 or? because there’s a lot of parts out there for the 17 but it’s hard to find stuff for the 19
i really wanna fully upgrade my 19 for a training and playing pistol
Hi. please tell me whether it makes sense to change the internal barrel with a hop-up chamber (like maple leaf kit for example), or just enough of the barrel 6.01. Thank you. sorry for my english
i would just get the inner barrel/tbb, there is no need for the hop-up chamber til the original breaks. you will see a very nice increase in fps/performance from the tbb
thanx alot!)
hay, whats up with 5ku. i saw that they are cheep but whats the reason you dislike them.
What’s the best glock in you opinion
pleas make adwanced thopics like blowback housing timing, high low output valve hammer valve, soft or hard recoil springs, nossle springs, ore diferent flute valves inside the nosssle
I only speak for me, they have been nothing but great for me. Haven't had any troubles and I've ordered alot from them :P
hey man i've been strugglin a lot to upgrade my "we glock 19" but i cant find the parts for it, can you tell me if there is any upgrades to make it look like the ATEi style?
What is light striking? (if I even spelled it right .__. ) Mentioned around 6:00
just a quick question, do guarder upgrade parts for TM will fit WE gbbp? particularly guarder upgrade parts for TM into a WE glock 19 gen4. just new into gbb scene. thanks in advance :)
great video very helpful, can your recommend a particular loading nozzle for my WE g18c?
What grip tape do you have on your g17 with the of frame
where do you get your parts, rear hammer assembly, steel trigger bar, enhanced air nozzle ect. I can't find anything except overseas, evike and other stores I've checked are always sold out.
im literally 99% buying overseas and yea its a challenge buying stuff no doubt
I just hate buying parts from overseas because if you need something small and cheap you pay more in shipping. I live in Lodi CA and TNT Airsoft in town just got a contract with redwolf and he ordered a bunch of g series parts since both of his have been broke for a long time.
Oh yeah just started my own youtube channel doing airsoft reviews so return the favor and subscribe please
i dont do that, i worked on my own channel without asking others, but good luck anyways.
+KnucklesGSM I can't find the Guarder front and rear "posts". What are the real names of the "posts"? A link would be appreciated.
Do you think you could make a video on jb welding the fram?
nah sorry, its super simple, i did a quick one on instagram, you just fill up the hole around the post with the epoxy
hi, ive bought an custom TM g18c lower frame can i use my WE g18c internals in the TM frame. would i need to change anything or is it an quick internal swop ?? any help will be greatly appreciated! !!
what website do you go to for the frame, slide, etc...
Hey man I was wondering what part would need to be replaced on a we g17 when the trigger response seems slower than normal? I have 2 we g17s and one seems to have what seems to be a normal trigger response while the other seems delayed/weak.
brigexplosion id check your loading nozzle, might have a slight crack, or it could be just dirty. also check your recoil spring and to see if anything is loose
hey, I'm in the UK so I had to have my g18c slide painted but I want to change it, will slides for TM g series fit we stock parts inside them?
xMx Miller paint stripper?
So I'm wondering, do I have to do a lot of modification for a HK3P Glock lower frame to fit like gunsmodify or UAC parts? Like trigger bar, hammer etc etc, or would it be a close drop in?
i'm on the fence on whether i should just get a Guarder or a HK3 frame... (or both)
sushitastesgood the hk3 is a great frame, no problem there but always expect to do some fitment
Where do you get these parts from?
I myself would love to upgrade a G18C but I have troubles finding the stuff you recommended
Check my glock playlist, the WE G18c is very similiar, but just a different upper in terms of loading nozzle and piston assembly.
+KnucklesGSM what upgrades would you suggest for a WE G23? and would you know if the UAC Aluminum Loading nozzle for the TM g18c would work on the WE G23 without having to mod anything or do any other fitment?
no clue, never worked with we g23 sorry bud
so i picked up a Detonator slide as well, same one you did and installed everything the way its supposed to be. but for some reason something keeps getting caught when i rack the slide back. Im running a guarder frame with stock internals but ive seen other vids with ppl doing the same so i dont understand why. pretty sure i installed the BBU correctly too. btw BBU is stock marui bbu also. any ideas why?
check your trigger bar, might be bent
Have you worked on WE G34? I haven't seen much about it online. Would most of these upgrades be compatible?
How did you reinforce the Guarder frame? Did you sand it before applying JB weld?
Negative, you fill the front post gap with epoxy
Would it be ok to run an extended inner barrel with the threaded external 5KU compensator, I'm wondering because of the outer barrel tilt and not being fixed to the said compensator or a silencer, also would running a 6.01 138 mm long maple leaf barrel be ok?
5ku isn't a choice for me due to quality they produce, but if it works for you then run it. Maple leaf barrels are good budget barrels no doubt
Where can I pick up slides for my tm glock 17? KnucklesGSM
Great video buddy!! 👍✌️ if I may ask you a question: I have the we g17 , and I have upgraded the air nozzle with the angel custom one. My question is. Would it be ok for me to use a co2 mag on my G17 or should I stay away from it? By the way, the Co2 mag is made for the we G series.
glocks and c02 for me personally are a no-go but thats just me. in the end its your gun and you can always try things out.
hey good vid, is it possible to fit internals from a WE or TM glock into a Guarder frame and slide designed for KJW?, the reason i ask is because shopping around online (from the UK) WE and TM are the most common brands of Glock available however Guarder upgrades for WE and TM Glocks are almost never in stock!...with a little modification maybe? Thanks
P4GES1 if your handy, technically anything can be fitted
Could you comment all the items you listed? Also, the upgrades you suggest, are they all compatible with a plastic slide? I have a TM G17 but I'm not sure if I want to upgrade it to a metal slide just yet...are there any upgrades I should avoid doing until I make the transition?
Just watch the video and pause it etc. Check online stores as well. Run it into the ground til it breaks then buy stuff
Where did you get these upgrade parts in Canada? Any problem in importing parts?
I'm not from Canada sorry bud
what does the nrown glock have on the top?I dont rember the name, i think it was mount rail or something, can you plz tell me what is it?
its called a scope mount for glock, not sure who made it though, bought it a long time ago
KnucklesGSM thx for the info, atleast
Thats from the SmartGloc company based in Canada