BIG THANKS Here, My KJW G27's hammer spring was broken and the mechanism just as like as this! and now it works normally after I replaced the spring, thank you so much!!!
Thanks, I appreciate the love and support man! You caught me at the right time :) Be sure to update me when you got your hi capa done, I love seeing custom pistols! :)
OMG... thank you for doing this vid. I was trying to install my new hammer spring on my G18c and was watching your other video on installation onto the g18c and have no idea what was going on... the video wasn't focusing and frankly, for a newbie nothing you were saying really made much sense. no joke, it took me all day around 12 hours trying unsuccessfully until i searched and found this vid you did which you explained much better than you did on the g18c video. There isn't many tutorials on this installation, maybe 2 others and they were pretty much good for nothing for a newbie. maybe you should put something in g18c video pointing it to this one for reference in case someone else is as dumb and new as me.... the two assemblies are 85% the same except for maybe a couple of parts full auto sear but the installation is basically the same.
Thanks for this. My kj works knocker broke and I had to take it all apart and get new steel parts. This video helped me out emensly. Thank you thank you thank you.
Okay sounds good, and I can't speak on C-more because those are based 100% on the user. You need to either borrow one and try it out and see if you like it or not. I don't do KWA, sorry.
I don't know what has suddenly gone wrong, but every time I rack the slide, it gets locked up 3/4 open. I can release the slide by pushing down on the trigger bar with a pick, so I think it has something to do with springs and the hammer assembly. Great video, I'm sure it will be helpful when I dive into it.
Im sitting here with fcking ramen noodles staring at the screen like a school boy.. damn your Videos are cool. I so wanna learn to upgrade a glock and your vids are so detailed thanks for taking the time man. Greetings from the Netherlands
I have literally no experience with glock holsters due to the fact that I am a pistol primary player (its always in my hand usually) so I can't really help here, I would check the airsoft forum, I'm sure it has a wealth of information! ^_^
Yo knuckles please get back to me on this question. I have a brand new 2018 we Glock 17. I run green gas all the time. Today I bought red gas. I filled my mag with red gas and when I played the gun could barely cycle and was shooting 50 fps lower. What I think happened was that red gas pressure is to high. So when the hammer strikes the output valve, the internal pressure is too strong and the stock hammer can't strike the valve hard enough and I think the part that's trikes the valve got fucked up. I tried another mag, cycles harder but it 25 fps less than yesterdays. What is this. What parts do you reccomend I replace
if you are trying to get higher fps, just get a tight bore barrel and bucking. that will be easier and cheaper vs trying to upgrade the whole hammer chassis.
Not sure if you can help, But whenever i pull the trigger the knocker is hitting the gas release on the mag and releasing all the gas. Im not sure what the problem is
I noticed you have an upgraded rotor, did you upgrade hammer and sear as well? Any suggestions for upgrade parts? Willing to pay more for compatibility
Im having the same issue with the zero hammer. I installed it perfect and its smooth after being racked back but the first rack is really rough and if i shoot with a mag in the gas just releases out and no blowback action
I have a kjw g23 and my valve knocker is broken is this common? And i live in sweden. And i can only find valve knockers on US sites. Its quite expensive to ship from US to sweden couse taxes and lots of fees. What should i do? My g23 has been broken for almost 1,5 years and i didnt know what was broken. Thx for showing me what was broken, pls help!
HAY. Im looking in the market for a new TM. I want to to help me pick from any Glock, a 1911a1, and a high-capa 5.1, but first whats your pick for a stock, for cycle rate, fps. After your pick which is best for a complete upgrade, for both gas efeciency and performance. Side note, i have been modding and upgrading 1911 based TM for about 3 years and dont need the noob talk. Sorry just had to say, because the forams give me the noob answers and replys. thanks.
Hi @ knucklesGSM i brought the new 2015 ace1arms rmr sai slide set for g17/g18, it come with one blow back unit which fits both g17 and 18, i put it on my g17 however when I rack the slide it doesn't seem to cock the hammer and so it won't shoot, any ideas on how to fix this? Btw the slide is similar to guns modify rmr slide
Yay! my KJW g23 knocker needed replacing, now it's not shooting properly. Guessing the knocker is too big or not striking the right place. Is this a common problem?
WOW! i like how to have a fast reply time and its cool, KWA is slowly loosing one more customer. Ill just stick with aimpoints and trijicons, but i stll need to buy a new replica because I dont like puting the real thing on my aegs and gbbs. ok then ttyl.
Sweet. I had plans for a new 5.1. Im fine, i know how much to spend, what to buy for all levels of fps and accuracy. I just wanted to ask someone who knows about 5.1s and Glocks. My last "?" would be about the c-more red dot. How are they and are they really worth the few hundred bones? I buy replicas. ps. I have a new KWA USP MATCH that i want to sell. Its a great gun and all but the lack of upgrades was a tern off over the months. Just saying if you or anyone wants to buy or trade. Thanks man.
Gotcha, I'm going to speak purely from a pistol primary user okay? There is no better pistol than the TM Hi-Capa for many reasons, since you are not a noob, I don't need to explain, but just go with the TM Hi-Capa, it is much better than the Glock and 1911 platform. Based on the TM Hi-Capa, for your requests I need to know more. 330FPS? 350 FPS limit? 400 FPS limit? Money budget? Looks? These are important to know for me to help you out, send me a message if anything. Hope that helps!
BIG THANKS Here, My KJW G27's hammer spring was broken and the mechanism just as like as this! and now it works normally after I replaced the spring, thank you so much!!!
Thanks, I appreciate the love and support man! You caught me at the right time :) Be sure to update me when you got your hi capa done, I love seeing custom pistols! :)
Thank you, love you video tutorials.
OMG... thank you for doing this vid. I was trying to install my new hammer spring on my G18c and was watching your other video on installation onto the g18c and have no idea what was going on... the video wasn't focusing and frankly, for a newbie nothing you were saying really made much sense. no joke, it took me all day around 12 hours trying unsuccessfully until i searched and found this vid you did which you explained much better than you did on the g18c video. There isn't many tutorials on this installation, maybe 2 others and they were pretty much good for nothing for a newbie. maybe you should put something in g18c video pointing it to this one for reference in case someone else is as dumb and new as me.... the two assemblies are 85% the same except for maybe a couple of parts full auto sear but the installation is basically the same.
Thanks! I was so focused on the hammer assembly. But i swapped it out for a spare slide i had and it works! Thanks so much!
Thanks for this. My kj works knocker broke and I had to take it all apart and get new steel parts. This video helped me out emensly. Thank you thank you thank you.
thank you! you saved my day ( and my g17! ) Salut from Belgium
+Benoît Delvaux cheers from california! :)
Thank you so much for this video. If not for this video I would NOT have got the trigger back together. Thanks again.
Thank you, my valve knocker broke. no problems taking it a part but the springs!!
also loving the vids, hope to see more soon, because they are alot of help and overall great.
Okay sounds good, and I can't speak on C-more because those are based 100% on the user. You need to either borrow one and try it out and see if you like it or not. I don't do KWA, sorry.
Tried to put in my spring and it went flying across the room. RIP my day
I don't know what has suddenly gone wrong, but every time I rack the slide, it gets locked up 3/4 open. I can release the slide by pushing down on the trigger bar with a pick, so I think it has something to do with springs and the hammer assembly. Great video, I'm sure it will be helpful when I dive into it.
Im sitting here with fcking ramen noodles staring at the screen like a school boy.. damn your Videos are cool. I so wanna learn to upgrade a glock and your vids are so detailed thanks for taking the time man.
Greetings from the Netherlands
DementeX Cheers bud! Thanks and greetings from California :)
I have literally no experience with glock holsters due to the fact that I am a pistol primary player (its always in my hand usually) so I can't really help here, I would check the airsoft forum, I'm sure it has a wealth of information! ^_^
Yo knuckles please get back to me on this question. I have a brand new 2018 we Glock 17. I run green gas all the time. Today I bought red gas. I filled my mag with red gas and when I played the gun could barely cycle and was shooting 50 fps lower. What I think happened was that red gas pressure is to high. So when the hammer strikes the output valve, the internal pressure is too strong and the stock hammer can't strike the valve hard enough and I think the part that's trikes the valve got fucked up. I tried another mag, cycles harder but it 25 fps less than yesterdays. What is this. What parts do you reccomend I replace
if you are trying to get higher fps, just get a tight bore barrel and bucking. that will be easier and cheaper vs trying to upgrade the whole hammer chassis.
Not sure if you can help, But whenever i pull the trigger the knocker is hitting the gas release on the mag and releasing all the gas. Im not sure what the problem is
I noticed you have an upgraded rotor, did you upgrade hammer and sear as well? Any suggestions for upgrade parts? Willing to pay more for compatibility
I would check your loading nozzle, might be cracked, broken floating valve, along the lines of that
Im having the same issue with the zero hammer. I installed it perfect and its smooth after being racked back but the first rack is really rough and if i shoot with a mag in the gas just releases out and no blowback action
I have a kjw g23 and my valve knocker is broken is this common? And i live in sweden. And i can only find valve knockers on US sites. Its quite expensive to ship from US to sweden couse taxes and lots of fees. What should i do? My g23 has been broken for almost 1,5 years and i didnt know what was broken. Thx for showing me what was broken, pls help!
Joel Ljungberg You can get them off fire-support.co.uk. www.fire-support.co.uk/product/guarder-steel-valve-knocker-for-maruikjwork-g23261718c
what holster do you use with your TM glock 17, as i am sick of using my utility pouch
HAY. Im looking in the market for a new TM. I want to to help me pick from any Glock, a 1911a1, and a high-capa 5.1, but first whats your pick for a stock, for cycle rate, fps. After your pick which is best for a complete upgrade, for both gas efeciency and performance. Side note, i have been modding and upgrading 1911 based TM for about 3 years and dont need the noob talk. Sorry just had to say, because the forams give me the noob answers and replys. thanks.
Will it work on an umarex Glock 17 gen 4 steel BB gun?
Hi @ knucklesGSM i brought the new 2015 ace1arms rmr sai slide set for g17/g18, it come with one blow back unit which fits both g17 and 18, i put it on my g17 however when I rack the slide it doesn't seem to cock the hammer and so it won't shoot, any ideas on how to fix this? Btw the slide is similar to guns modify rmr slide
AkashBhambra can't speak on it, no experience with it or any customers with it sorry bud
Ok thanks anyway dude and keep up with the cool videos :)
thanks bud and sorry bout that, i got a policy for myself that i try to practice, only speak on what i've worked on haha
I understand lol, if I do find a solution I'll let you know
Yay! my KJW g23 knocker needed replacing, now it's not shooting properly. Guessing the knocker is too big or not striking the right place. Is this a common problem?
Jarrod Constable im confused, you replaced the knocker and its no longer working?
I replaced it and its not functioning properly
Jarrod Constable do a double check to make sure that the valve knocker retracts like it used to, is it the correct valve knocker as well?
It may not be the right one. I got it in a swap and had to put it back together. Hence watching your great vid
Will a Tokyo Marui g17 hammer fit in a WE g23.
You tell us, not to lose the first spring.. well mined jumped out already. So how is it called and where can I get it?
Michiel Kooij somebody answer this dude's question
WOW! i like how to have a fast reply time and its cool, KWA is slowly loosing one more customer. Ill just stick with aimpoints and trijicons, but i stll need to buy a new replica because I dont like puting the real thing on my aegs and gbbs. ok then ttyl.
Sweet. I had plans for a new 5.1. Im fine, i know how much to spend, what to buy for all levels of fps and accuracy. I just wanted to ask someone who knows about 5.1s and Glocks. My last "?" would be about the c-more red dot. How are they and are they really worth the few hundred bones? I buy replicas.
ps. I have a new KWA USP MATCH that i want to sell. Its a great gun and all but the lack of upgrades was a tern off over the months. Just saying if you or anyone wants to buy or trade. Thanks man.
Gotcha, I'm going to speak purely from a pistol primary user okay? There is no better pistol than the TM Hi-Capa for many reasons, since you are not a noob, I don't need to explain, but just go with the TM Hi-Capa, it is much better than the Glock and 1911 platform. Based on the TM Hi-Capa, for your requests I need to know more. 330FPS? 350 FPS limit? 400 FPS limit? Money budget? Looks? These are important to know for me to help you out, send me a message if anything. Hope that helps!
Thanks! :D
CJAwesome83x ^_^
Superb. :)
Check my other videos