You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
I suffered through four stupid videos before finding this one that showed me what I needed and searched for: how to actually _remove_ a stored code. Thank you.
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Wow!!! Sir, I can't thank you enough for making this video. I had to go to your other video on how to find the 5 digit code. I followed your instructions to the letter. The hardest part for me was lifting the center piece up and off over the gear shift. I almost gave up, but I used the butter knife to help pop the top tabs, then I was able to lift the whole piece up over the gear shift. I used my cell phone to take a picture of the 5 digit code. Then went back to your video on how to do a new 5 digit code. It all worked perfectly thanks to both of your videos. I don't have the words, other than to say thanks a million for the help! Liked and subscribed! You Rock!
3 years old video, and still saving lives today. Dont know how i came across your video but you are truly appreciated, thanks, from a 2006 Zephyr owner ❤❤❤
This is one of Ford's best universal feature. I literally made a decision to buy a car over another car brand as both cars were both in good condition but because I have had vehicles in the past with it I understood how valuable atleast to me this feature is. The G.M. car I was thinking about even had 10k less miles. One of the top 10 reason I prefer Ford .
Thank you for this video!! I have a 1994 Lincoln Town Car Executive that the security keyless bar has the 5&1 wore off because that's the code-51551. One morning, I went to back out my driveway & noticed the hood was unlatched.🤔?? I didn't do that last night, but I remember someone was outside, talking loud in front of my house. I figured that this scoundrel went to pushing the 5&1 until the door lock popped open, he pulled the hood release, but didn't open the hood. My fiance& I were having a "loud discussion"😒 which I think scared the thief away. So now I'm paranoid about someone knowing my door code, open the hood, and mess with the engine, that I want to change the code now. I have the owner's manual and repair book for my car. Now with them & your video, I can change it now!!☺️Thank you so much!!
Just a heads up. If ur lights, the keyless entry lights,come on and stay on. Change the battery in ur key fob. It's the alert to tell u ur battery in ur fob is low. Its in the manual as well. Hope this helps someone. Ive had 2 fords. 2002 Explorer and 2013 Escape
Just bought an 08 limited 1 owner car fax was clean, no accident reports, 100k miles I negotiated for 4500$ because their was a few cosmetic issues ..anyways I just saw both your videos and it worked !! Thanks for the help !!!
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Will the keypad still work if u accidentally lock your keys in the vehicle? I would test it out but I only have one copy of my keys since i purchased the vehicle second hand
www.SUMMITAUTO.com thank you! I also accidentally found out that if you press 5-6 after entering the code, it will open the glass on the hatch. Not sure if anyone knew that or not
Pls can you find a 2008 mercury sable I would appreciate it from the heart . I have locked my keys inside a few times and need it . Thank you so much and God bless you…
so im not sure what u ment by finding my vehicle in the comments or on that link in the right top corner but i just bought a 2002 for f150 no owners manual
I know this video is old, but I was curious to know. Is there a way you can remove the factory code? Because on my 2010 Ford edge, the code is too easy where you just hit three buttons randomly and it unlocks the door, I set the programs for the three slots and that works fine, but I would like to remove the factory code.
Here you go! Remember to like and subscribe and then come back and rewatch this video to program your own door code. th-cam.com/video/Aq7CumvEOeo/w-d-xo.html
Great video, but when I followed your instructions, the locks didn't cycle. This escape was bought second hand (from a body shop so we are assuming it was in an accident) and perhaps the door is not original to the vehicle. Is there any way to find out the code for a particular door?
Thanks for this video...also, thanks to Karein Reid for her comment as well. My first vehicle with all this electronic stuff. I like it but, wow do I see alot that may need repairing which requires electronic troubleshooting. Heck anymore all I can do is change oil, trans fluid and to the brakes. They now got me by the "whatever". Soon I hope to get electric car and avoid all the messy fluids. Then I will be totally out of luck trying to save money by working on my own car....why did I ever sell my 1956 Chevy??!!!!
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Great job keeping this tutorial informative and short. Here's my big question? When you press 7-8 & 9-0 simultaneously to lock the doors, does that also mean the alarm is activated or are you just simply locking the doors?
After it unlocks the Driver's door press the 3-4 button. That will unlock all the doors. To lock all the doors pres the 7-8 and 9-0 button at the same time.
This is a great video for those that don't know how to program a personal entry code. I've owned my 97 Mark Vlll since 2004 so I know the procedure. But for the love of GOD why are you pressing so hard on each button???? I noticed your actually flexing the door inward when you are pressing the buttons. They don't need too much effort to contact the switch that's under that number code pad.
I could not do it on my 2014 Edge. I got the factory code and it cycles the locks but nothing happens after I enter my 5 digit code and 1-2. same with erasing code, after following the steps no lock cycling.
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
You press only one of the last 3 buttons depending on which driver you want it to go to. You can program up to 3 personal door codes. 1 for each button
I dont think you can find them. Those are dealer add on key pads and I believe the stickers dont match the keypad even if you do find them. It is just like the new Rangers and Focuses.
I locked my keys in my 2011 Ford Taurus so I don’t have the manual and I don’t know the code to the door so how can I get the code to my door so I could open it
That was pretty nice how set up all the different drivers, Thank you very much this was very helpful
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Have a 2013 Ford F150 I cannot find the keyless entry code how do I find that
Here you go! th-cam.com/video/P21ChixVTqs/w-d-xo.html
Same here. This is what I needed in 30 seconds
I suffered through four stupid videos before finding this one that showed me what I needed and searched for: how to actually _remove_ a stored code. Thank you.
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Love the verbiage “suffered” I went thru the same 😂
If you have your code lock the door but roll down your driver side window put the code in door will unlock lock then unlock again easy one 2 3
Wow!!! Sir, I can't thank you enough for making this video. I had to go to your other video on how to find the 5 digit code. I followed your instructions to the letter. The hardest part for me was lifting the center piece up and off over the gear shift. I almost gave up, but I used the butter knife to help pop the top tabs, then I was able to lift the whole piece up over the gear shift. I used my cell phone to take a picture of the 5 digit code. Then went back to your video on how to do a new 5 digit code. It all worked perfectly thanks to both of your videos. I don't have the words, other than to say thanks a million for the help! Liked and subscribed! You Rock!
That is so awesome! Glad I could help. If I saved you some time and money consider the super thanks button! :D
PERFECT way of explaining and showing this process. Awesome job.
Glad it was helpful! Remember to like subscribe and share!
3 years old video, and still saving lives today. Dont know how i came across your video but you are truly appreciated, thanks, from a 2006 Zephyr owner ❤❤❤
Do you have your door code? Heres how to find it if you need it. Glad you liled the video!
th-cam.com/video/3pDLOmgyRuc/w-d-xo.html
This is one of Ford's best universal feature. I literally made a decision to buy a car over another car brand as both cars were both in good condition but because I have had vehicles in the past with it I understood how valuable atleast to me this feature is.
The G.M. car I was thinking about even had 10k less miles.
One of the top 10 reason I prefer Ford .
I use this feature a minimum 3 times a day on my vehicles
Thank you for this video!! I have a 1994 Lincoln Town Car Executive that the security keyless bar has the 5&1 wore off because that's the code-51551. One morning, I went to back out my driveway & noticed the hood was unlatched.🤔?? I didn't do that last night, but I remember someone was outside, talking loud in front of my house. I figured that this scoundrel went to pushing the 5&1 until the door lock popped open, he pulled the hood release, but didn't open the hood. My fiance& I were having a "loud discussion"😒 which I think scared the thief away.
So now I'm paranoid about someone knowing my door code, open the hood, and mess with the engine, that I want to change the code now. I have the owner's manual and repair book for my car. Now with them & your video, I can change it now!!☺️Thank you so much!!
Hopefully that was not the factory code because that cannot be erased
Just a heads up.
If ur lights, the keyless entry lights,come on and stay on. Change the battery in ur key fob. It's the alert to tell u ur battery in ur fob is low. Its in the manual as well. Hope this helps someone. Ive had 2 fords. 2002 Explorer and 2013 Escape
Thank you!
Heroic video, thank you soldier. You are a good man
Glad I could help
Just bought an 08 limited 1 owner car fax was clean, no accident reports, 100k miles I negotiated for 4500$ because their was a few cosmetic issues ..anyways I just saw both your videos and it worked !! Thanks for the help !!!
Awesome glad I could help! Remember to like subscribe and share!
@@Summitauto done !!
4500$ you got scammed
Good price.
Also works on the Ford Edge thank you for the video
I believe it works on all Ford Keypads!
Thanks for the help! Just got a 2010 Escape Hybrid and am learning the ropes!
Glad I could help!
Infomative content thanks 🙏
Very useful.video thank you very much. Worked like a charm on my fusion I just got. It didn't come with the owners manual unfortunately
Glad I could help!
Ford really does make some brilliant stuff👍❤️.
I love my Fords
Thank you, it worked for me.
Ford F150 2015 Lariat
Glad to help!
Correct me if I'm wrong. The factory code will ALWAYS work, even if 3 custom codes are programed and you do the erase all codes function.
The factory code can never be erased unless you replace the Body Control Module
This cannot be true. So if I purchased the car from my neighbor he would always have a way to get in. Shame on Ford, this should be recalled
@@sosick2005 I agree. That is quite a flaw on Fords part. Everybody I've contacted tells me the same thing.
@@sosick2005 you could disconnect the key pad
Thanks for the help in both ford escape videos. I would've never thought to look underneath the gear shifter for the code
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Thank you so much, straight to the point and simple 👌
Awesome glad you liked it! Remember to like subscribe and share!
Excellent video. Clear and to the point. Thanks.
Glad it was helpful! Remember to like subscribe and share!
Why did the put 2 digits per button instead of just 1-5? Is there a functional difference (ie press 1 twice for 2)?
This worked for me. Thanks. Super easy.
Awesome glad I could help!
Will the keypad still work if u accidentally lock your keys in the vehicle? I would test it out but I only have one copy of my keys since i purchased the vehicle second hand
Yes it should as long as the pad is working and the battery isnt dead
Thank you for Sharing 🎉
Glad I could help! Remember to like and subscribe!
I saw you press the last 2 buttons, does that lock it? And is there any other button sequence I need to know? Going to try this now!
Pressing the last two buttons locks the doors. After you press the code in if you press the 3-4 button it will unlock all the doors.
www.SUMMITAUTO.com thank you! I also accidentally found out that if you press 5-6 after entering the code, it will open the glass on the hatch. Not sure if anyone knew that or not
Omg thank you it took me a couple try to get it right but it work!!!
You're welcome! Glad I could help! Remember to like subscribe and share.
MERCI POUR L INFO ET LE TEMPS DE METTRE FRANCAIS...
Worked for me 2015 f150 thankyou!!!
So glad I could help you out!
Pls can you find a 2008 mercury sable I would appreciate it from the heart . I have locked my keys inside a few times and need it . Thank you so much and God bless you…
Good video! I really like the key less entry on my 06 Ford 500.
So the factory code-will always work regardless of your new programed code?
Yes it cannot be erased. You can program up to 3 personal codes.
You get a sub just because. I cant wait to check out some more of your vids.
Awesome! Thank you! I have A Lot of videos!
Dure años. Queriendo saber el codigo, gracias por la información tan sencilla.
informative. Thank you.
I would love to know how to find the factory door code for my 2016 Ford C-Max. Can't find a video anywhere.
Key Code is on the truck hinge arm on the 1987 Tbird Turbo Coupe.
I need to find the factory code for a 2011 Dord Escape Limited 3.0K. Thank you!!!
Here you go!
th-cam.com/video/gqiHU_Kw7sI/w-d-xo.html
I just bought a 2002 crown Victoria and it has a keyless entry pad and I’d like to figure out the code for it have you ever done a video for this car?
Try the the trunk hinge and let me know . I've never had the opportunity to do one and verify
Do you have anything on a Mercury Montego 2005?
so im not sure what u ment by finding my vehicle in the comments or on that link in the right top corner but i just bought a 2002 for f150 no owners manual
Here you go. This is how ypu find your factory door code.
th-cam.com/video/UmUAn12d2H8/w-d-xo.html
@Summitauto **GASP**!! U RESPONDED!!! and so quickly! eeeeek thank u thank u tha l u!!!!
Of course. I am a professional.
I know this video is old, but I was curious to know. Is there a way you can remove the factory code? Because on my 2010 Ford edge, the code is too easy where you just hit three buttons randomly and it unlocks the door, I set the programs for the three slots and that works fine, but I would like to remove the factory code.
You cannot erase the factory code, but you can erase the codes that the previous owner programmed.
Staright to the point video
Thank you alot
Glad to share the knowledge! ENJOY
Thank you!!
Thank you 👍🏼
You’re welcome 😊
Works on 2017 Ford Fusion too.
I need help finding my unlock door code for a Ford Focus 2014
How do I find the code to set my own code? I bought this 2014 Edge used and can't figure it out
Here you go!
th-cam.com/video/Aq7CumvEOeo/w-d-xo.html
Awesome. Best wishes.
That is awesome! Glad I could help! Remember to like subscribe and share! If I saved you some money check out the Super Thanks button below the video!
Do not have a factory code for my 2013 Ford escape where do I find it on the car
Here you go!
th-cam.com/video/6naRWVl6O0U/w-d-xo.html
I brought the last year 2023 i forgot ask the door code the owner,,,edge ford limited 2008 model i don’t know door code,,i hope u can help me
Here you go! Remember to like and subscribe and then come back and rewatch this video to program your own door code.
th-cam.com/video/Aq7CumvEOeo/w-d-xo.html
We bought a 2009 ford escape with no manual. How do I get the door code to set an entry pin?
Here you go!
th-cam.com/video/gqiHU_Kw7sI/w-d-xo.html
Does this erase all the codes or just driver ones code?
Just the driver ones. You can not erase the factory code!
2007 mercury mariner factory code needed please
Did you ever get the factory code for your mercury mariner ?
Great video, but when I followed your instructions, the locks didn't cycle. This escape was bought second hand (from a body shop so we are assuming it was in an accident) and perhaps the door is not original to the vehicle. Is there any way to find out the code for a particular door?
th-cam.com/video/gqiHU_Kw7sI/w-d-xo.html
how to find the factory key code for a ford escape 2008
thank you
Here you go!
th-cam.com/video/gqiHU_Kw7sI/w-d-xo.htmlsi=XXHjNA4LIa5BPBPw
2008 Ford Escape
Here you go! Remwmber to like subscribe and share!
th-cam.com/video/gqiHU_Kw7sI/w-d-xo.html
Thanks for this video...also, thanks to Karein Reid for her comment as well. My first vehicle with all this electronic stuff. I like it but, wow do I see alot that may need repairing which requires electronic troubleshooting. Heck anymore all I can do is change oil, trans fluid and to the brakes. They now got me by the "whatever". Soon I hope to get electric car and avoid all the messy fluids. Then I will be totally out of luck trying to save money by working on my own car....why did I ever sell my 1956 Chevy??!!!!
Just subscribed! Love your very helpful content, thank you.
Thank you so much!
Can you do the 2010 Ford Flex SEL?
Try this. Might be in the same spot in a 2010. I think it is. th-cam.com/video/756xlQF6jqQ/w-d-xo.html
Have 2001 Mercury grand marquis LS
and
2003 Lincoln TC SIG
Will and additional code on both for wife to use…..something like sons bday info
TYVM
What if I bought a door that has a keypad on it but mine didn't have one from factory. How can I use the keypad
What kind of vehicle?
Can you help me find the factory code for my 2017 Ford C-Max? I tried the two key thing but it did not work :(
What is the reason of changing the code if the factory code will always work
If you have a code you use a lot that is easy to remember.
Thank you for your help!
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Hey where can I find the code for the 2012 for escape ?
th-cam.com/video/gqiHU_Kw7sI/w-d-xo.html
Thanks ❤️
Thanks, you made that easy!
Is there away to deactivate the keypad entry?
You could unplug it
It’s a 2010 ford fusion where would I unplug it from
Probably a plug in inside the door otherwise figure out what fuse is associated with the door pad and remove it
I cant tell u how much i want this on my 93 f150 ive locked myself out so many times
2003 Ford Taurus
Great video, very helpful. Thank you
You are welcome! Remember to like subscribe and share!
Can you not lock it with keypad?
If you press 7-8 and 9-0 at the same time it locks all the doors.
2003 Ford Windstar SEL?
2011 f150 xlt how to change combinations
This should be the same. You need to know the factory code though. Here is how you find that.
th-cam.com/video/P21ChixVTqs/w-d-xo.html
Thanks for that but you help me with 2007 ford edge door code
Here you go!
th-cam.com/video/Aq7CumvEOeo/w-d-xo.html
2003 mercury grand marquis, clocked my keys in the car and don't know the code nor have access to any of the stops to find code.. any suggestions
I am not sure on that one. It has been a while since I have seen one of those.
Thank u
Great job keeping this tutorial informative and short. Here's my big question?
When you press 7-8 & 9-0 simultaneously to lock the doors, does that also mean the alarm is activated or are you just simply locking the doors?
It is just like you locking your car with the key fob
What if you don't have code an can't get in truck because it's locked an keys are inside
i have a 06 montego i found my code but it onl opens driver door is here a wat for me to unlock all doors and to lock it?
After it unlocks the Driver's door press the 3-4 button. That will unlock all the doors. To lock all the doors pres the 7-8 and 9-0 button at the same time.
2013 Ford Focus
How do I find my 2008 Mercury sable code
Do you have the code for my 2008 ford edge limited
Here you go! th-cam.com/video/Aq7CumvEOeo/w-d-xo.html
I have lost one set of keys and I may have locked the other set inside the vehicle. So now tell me how to get into my 2008 Ford Escape XLT
how to find factory set door for FORD Fusion
What year?
@@Summitauto 2011
Here you go!
th-cam.com/video/-J1gfdjPF_A/w-d-xo.html
Beautiful blue. I would love to have a 2010 Limited with touchscreen in an even darker blue. Perfect. ❤
No doubt uuu
This is a great video for those that don't know how to program a personal entry code. I've owned my 97 Mark Vlll since 2004 so I know the procedure. But for the love of GOD why are you pressing so hard on each button???? I noticed your actually flexing the door inward when you are pressing the buttons. They don't need too much effort to contact the switch that's under that number code pad.
I had a 98 Markviii
Door code for 2007 Lincoln Towncar?
I could not do it on my 2014 Edge. I got the factory code and it cycles the locks but nothing happens after I enter my 5 digit code and 1-2. same with erasing code, after following the steps no lock cycling.
Check you owners manual. This is the first I've heard it not working. Good luck and let me know.
Bless your soul thank you
You are welcome! Remember to like subscribe and share!
How to find the factory door code on Ford Crown Victoria 2010?
I wish I knew.... i dont have a crown vic to find it on!
nice! thank you!
You are so welcome! Glad I could help you out! Remember to like subscribe and share! If I saved you some money 💰 consider clicking the Super Thanks button below the video!
Did he hit the last two buttons to lock in that code
You press only one of the last 3 buttons depending on which driver you want it to go to. You can program up to 3 personal door codes. 1 for each button
Where can I find rhe factory code for a ford fiesta 2013?
I dont think you can find them. Those are dealer add on key pads and I believe the stickers dont match the keypad even if you do find them. It is just like the new Rangers and Focuses.
2019 Ford fusion hybrid please?
good deal bro!
Can the original factory set code that came with the truck be erased?
No
how do I find code for a 2007 ford F150 xlt triton, thanks
th-cam.com/video/Lg2LX7lbEAQ/w-d-xo.html here you go
I locked my keys in my 2011 Ford Taurus so I don’t have the manual and I don’t know the code to the door so how can I get the code to my door so I could open it
You need to find the code before you Lock it
Nice video and Good job, it was very interesting. Thank you ////////////////////
GLAD YOU LIKED IT AND IHOPE IT HELPED YOU OUT! REMEMBER TO LIKE SUBSCRIBE AND SHARE!
I didn't get a book or code with mine . My car is a 2018 Ford escape
Here you go. th-cam.com/video/6naRWVl6O0U/w-d-xo.html
2013 Ford Escape can’t find my code can u help?
Here you go! th-cam.com/video/6naRWVl6O0U/w-d-xo.html
Here you go! th-cam.com/video/Aq7CumvEOeo/w-d-xo.html