Tested! Anet ET4 firmware upgrade steps | version 1.1.5 | ET4 Only
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- The Anet ET4 firmware has an upgrade available. A few steps to remember. Make sure you have the ET4. It does not work with any other models. You may brick your machine... be careful. Anet makes it very clear in the steps that it is on you if things go bad.
Formatting the original card or using a high-quality SD card is also on the list.
Here is the link to the forums. forum.anet3d.com/
You will need to recalibrate your bed as well. forum.anet3d.com/
Looking to buy an ET4? Check here gbe.st/302eHrA
Make your life as a TH-camr easier by installing TubeBuddy. Use this link and you support me as well. www.tubebuddy.com/DoodleJams
If you have any questions, add them below the lessons as comments. Thanks for watching and please subscribe.
Make something awesome or just want to say "thanks" for the vid? You can find us @HLModTech on Instagram, Facebook, or Twitter.
/ hlmodtech
/ hl.modtech
/ hltinkercad
Support HLModTech via paypal.me/hlmodtech
HLModTech is your hub for Technology Training. Specializing in tech tools and 3D printing, but feel free to request other topics as we are always looking to expand. - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Masters Shanghai Playoffs DAY 1 // 100T vs FUT | FNC vs GEN](http://i.ytimg.com/vi/erQ7pGChzxA/mqdefault.jpg)
Great information, thanks 👍
Thanks Mcvaughn Ovid for the feedback! 👍
Hi, I have bought mine yesterday, so I'm waiting for it, I've watched some of your videos about this machine and i really appreciate your help making them. My question is what are the advantages of this update.
I am not sure what 1.1.5 really helped. Maybe it could read the sd card without powering it off. I ended up moving to Marlin 2.
Good night dear!
I went to update the firmware of my Anet ET4+ printer to version 3.0.0 and ended up making the printer unusable.
The displey was blank, is there a way to fix this problem?
You can save a lot of ET4 machines with the ST-Link steps. th-cam.com/video/KKCer809pxU/w-d-xo.html
Hi.
Can i use 1.1.7 fw on ET4 which doest have auto leveling sensor so the regular first version of ET4 without capacitive sensor.. I have now the first 1.10 fw version. I m wondering will my ET4 start to go home at bottom if i upgrade to 1.1.7FW? as i have stock end switch on z axis only at the top. Do i need end switch hardware modification if i upgrade to 1.1.7 fw as it will start to go home to the bottom or it will still go to the the top at home position? I dont want to use any auto level function but want to use M503 and other gcode to setup estep calibration which only supported by the 1.1.7fw.
Thanks
Sorry I missed this. I am not sure.
You say ET4 dont have a automatic bed leveling, but i have simple ET4 and i have bed leveling ... Is this some older version?
Yeah, they did an update sometime last summer. Yours does not home up either, right? Our original ones did. It was so odd.
Hi... do you have a video for the ANET ET4+.....?
Yes, but but only with ST-Link to Marlin 2.0 th-cam.com/video/dyTOkUW0aas/w-d-xo.html
@@HLModTech Thank you!!!...
I know its old but I bought an et5x and swapped out to the silent board. I go to update the firmware and it loads to 88% and then flashes white and resets. Any help?
Swapping boards most likely means you would need to edit the firmware before you flash it. I do not have the skills to mod the firmware. You may find someone in the Marlin Discord that has them though. It may even be easy... it is just not in my skill set.
@@HLModTech it's the stock anet firmware not marlin
@@DubandJub3DPrints Ah, but when you start swapping components you need to make the firmware match the components. Like dropping a chevy engine in a Subaru... you are going to have to tweak stuff to get it to work.
@HL ModTech well its an anet printer, anet board and anet firmware so you'd think it'd work
@@DubandJub3DPrints Sorry, it does not work like that. It would be as if the computer code for a Chevy Tahoe was the same as a Chevy Cruz. There are different parts in the silent board so the silent board requires a different code.
i try upgrade v 1.1.1 -> 1.1.5 bur i get a only the start annet screen j have a Annet ET4 what do i wrong
A lot of people had a bad SD card that caused that freeze. You can fix it with these steps. th-cam.com/video/KKCer809pxU/w-d-xo.html
Hi this firmware fit on Anet Storm G1? have MB ET4P V1.0
I do not know... and I doubt it. Will do a little looking though as I know nothing about the Storm G1.
You ever try to update the storm?
hello, do I have to format the sd card, in fat 32?
I am not sure. I will see if I can find time to test it today though.
@@HLModTech thank you
Also possibile with the Labists ET4 ?
I have no idea as I have never touched one. Does yours have a sticker on the side with info? If so, what does it say.
@@HLModTech i send you a photo on Facebook!
I am wondering the same thing?
@@disspicable1724 yes
Do you know anything about the ET5X?
I have one. It runs great. I left in stock I use it pretty much every day.
what firmware is needed for et4+ ????
I upgraded mine to Marlin 2.0 using one of those ST link programmers. I'm not sure what the official firmware is anymore.
ive tried to do the exact same thing on my ET5 and it wont even start the update anythoughts?
This video shows how to recover a Anet that had a bad flash. th-cam.com/video/KKCer809pxU/w-d-xo.html
@@HLModTech gave it a go doesnt work just going to throw it out unfortunately
Did you buy an ST-Link? THey are under 10 bucks. I have never had a printer that was un savable.
@@HLModTech the amount of problems I’ve had with the ET5 has put me off cheap printers, just going to save my money and get a creality printer or something higher quality in the future
I get that. Hopefully you find one you dig. I had an Ender 3 in my classroom and it was a workhorse. There are also a boat load of groups where you can find assistance for it.
whenever i go on the link it says its not safe even with my protection off
I just tested and you are correct. I would guess that they have not updated their certificates. You may be more successful visiting anet3d.com and checking out their download area.
Can I update firmware without st link on et4 pro
Their stock firmware update without the ST link, but if you want to switch to any version of the marlin you’ll need a ST link
@@HLModTech im update stock filmware that shows create files successfully but not loading home page for some minutes I turn off & on again only shows on logo 😭😭😭
@@HLModTech pls help me
@@sureshkumarr8998 Super sorry to hear that. Here is how I fixed one I had that ended up with a frozen boot screen. th-cam.com/video/KKCer809pxU/w-d-xo.html Which firmware did you use?
@@HLModTech anet official website et4 pro firm ware shop.anet3d.com/blogs/anet-et4-et5-3d-printer-faq/how-to-update-et4-pro-to-firmware-version-v3-0-0
It doesn't matter if you mess it up because Anet doesn't honor their warranties anyway.
Thankfully I’ve never had to use the warranty system. I know everything I bought overseas it was slow to get support. My usual go to was Facebook groups because you can get replies they’re pretty darn quick. I do like how easy it is to bring one back to life with a ST link adapter.
@@HLModTech I bought mine on Ebay from an Anet distributor back in October and when I opened the box I noticed the warranty sticker was hanging off so someone obviously opened it at some point in time. I messaged them and told them my concerns and they assured me that it's under warranty and any problems to let them know. I was too busy with work and other stuff at the time so I waited till after the holidays to finally assemble it and start using it. Right from the start I was having problems with it. The print head was arcing inside due to faulty wiring and the main board is very problematic. Don't know if it's the board or the firmware. None the less, it has issues to this day and it is under warranty. I messaged them several time informing them about the issues I was having and they haven't responded to this day. I contacted Ebay and they basically told me that I waited too long to use it but as I explained to them that it has a one year warranty and it is within the one year. If it was junk in October than it would be junk in February as well as it will be junk in June. It is within the warranty service time. Customer service at Ebay are the most brain dead people I have ever dealt with. So here I am with a basically useless printer that's under warranty that Anet is apparently not going to do anything about and I'm out $170. Will never buy another Anet product again. I actually picked up 3 printers on FB marketplace for $60 for all three. 2 Ender 3's and an Anet A8.Ender 3's work great but the Anet is being sold for parts because I want nothing to do with their products.
Sorry for your frustration. I liked that I could easily flash with the ST-link th-cam.com/video/mAmIbrGi6G8/w-d-xo.html Popping Marlin on them was pretty slick. Really cool you landed a couple Ender 3's. I have one that is a workhorse for me.
Yeah, it's been pretty frustrating to say the least. I have a couple questions if you don't mind and you seem to be very knowledgeable . I have a BTT SKR V1.4 turbo that came out of the Anet A8 that I got with the two Ender 3's. Do you know if that is compatibly with the Anet ET5X and or the Ender 3. And second, are the Anet A8 parts compatible with the ET5X, meaning the PSU and the print head/hot end as well as the stepper motors? These printers are all new to me, I've actually built high end gaming PC's but these printers are a whole different world to me. Lol Thanks
I have not messed with modding printers much. I to was a PC builder... Just have not messed with taking the printers to new levels. Sorry I cannot give you better info on the compatibility of the various parts.
el chapo guzman jajajajajaja
=)