Realize this is a really old video so shot in the dark here... Does the polymer affect capability at all? Looking for a budget chassis as I cant afford another MDT chassis, so was looking at the Oryx, but the xray is intriguing with a little less weight. Ultimately would be going on a .300WM that I would like to use for hunting as well as long range. With the 2.4lb HS Precision stock it came with, it's already getting a bit hefty to carry for hunting due to the Sendero barrel, so this has peaked my interest.
All of these chassis use an aluminum backbone or bedding block. So the plastic is just the part you are touching. Depending on the specific construction, you may notice a difference in the recoil impulse, but accuracy will be good with any of them.
Awesome review once again John! KRG is lucky to have such a professional reviewing their product! This chassis is VERY interesting to me, from a weight and cost perspective.. It might be a stupid question, but what mags does this chassis take? PMAGS? I would assume that a Rem. PSS LTR would fit this chassis nicely/function with the mags ok?
Always come close to buying one but cant get my head arpund the fact the front and back section doesnt mate properly. The lines are off below the action and not straight. My OCD just cant get past it. Kind of looks like 2 different chassis front and back squished together at the magazine well.
I can see it now. Someone going to start stippling it like a Glock due to its polymer makeup. Nice video. I hate my timney triggers pin sliding out as well.
honestly I think I like this more than the xray as long as you don't need a folder its lighter same bedding block and isn't affected by heat as much plus it saves money to get nicer glass
I am looking at both those chassis as well. I like the Xray because its longer to put your bipod out further and has a flat bottom make it easier tp shoot off surfaces. Also I like that its polymer exterior in case I bang it around. Anoth plus that is just mg preference is that I love the way this chassis looks. Good luck.
The KRG X-ray is more rigid and you will be able to mount a bipod further forward for more stability, whilst the MDT LSS is more modular. I just ordered the X-ray myself :)
Leon K They end up being almost the same price once you add the pistol grip and stock to the LSS. The X-ray is more rigid and has more mounting sections for accessories. it is also a bit longer so your bi-pod if further away. I see this as an advantage, but it's debatable. I'm going with the x-ray but the LSS does give your more customization with it's modular grip and stock system.
The actual direct competition from MDT is the HS3, similar design and a little less bulky. Here in Canada the MDT is easier to find and get due to not needing an importer as this does. Both are nice stocks but the KRG is too bulky for hunting.
I chose this chassis for my first precision rifle build. threw a 700 AAC-SD in it with a primary arms FFP 4-14 power scope, AAC non mount brake, and i couldn't be happier. it's GOOD TO GO!! ;)
Hey Rex what do you think of this set up, Tikka T3x Stainless Varmite 7mm Remington magnum with a viper PST 4-16x50 FPP with a KRG X-Ray Chassis. Please give me your Blunt thoughts on it thanks!
John, I'm working with a unmodified Remington 700 SPS Tactical .308 with the junk Hogue stock and need to get consistent precision with it. It is for use as a LE sniper rifle. Would you recommend this chassis as a good replacement? I've been eye balling this chassis or possibly the KRG Bravo to drop the factory action/barrel into. What are your thoughts/recommendations? Do you know how a factory heavy barrel performs in this chassis? Thanks!
Hi John, great video. Care to share the specs on that rifle of yours there, including the weight? Did you also find the chassis weight to meet the advertised spec of 3.1 lbs? Thinking about this chassis for a defiance receiver and a timney or jewell. Thanks!
Would you prefer the X-ray or the MDT ESS Chassis? Looking for a chassis for my Tikka T3x in .223. I know the industry likes bigger calibers for chassis guns but I can afford to shoot a lot on this rifle and my absolute longest range is 600 yards.
John McQuay do you have an after-market barrel in this video? If so, what is it and by whom? Thanks for doing the videos. Some have been helpful for me as I have built my first LPR.
Good evening Mr. McQuay, Just checking whether it's just me or the camera angle but it seems to me that there's a bend next to the charging handle (where the back meets the front). Really nice chassis otherwise. Can't wait to get one on my R700. Thank you so much and hopefully your kid feels better soon (instagram)
Hey i have a question. I bought whiskey 3 gen 6 folding stock. Im very upset with length of pull part. To feel comfortable i need to pull out all the way but no matter how hard you tighten it still shakes. From customer service i received an answer dont pull all the way out. Now is it possible to replace folding stock to fixed stock from x ray shassi to my wiskey? Thank you very much?
Hi John, I was wondering if you had noticed the small amount of tilt between the buttstock and the chassis? I am somewhat OCD, so I shimmed the back down with a guitar pick, worked great.
I have a rem 700 and a savage. Is there a reason most aftermarket chassis, stock manf don't make a system for the savage models? Lately I find myself enjoying my Savage over my Rem. I'm ready to do some up fitting on my rifles. What are the pros of going with a chassis system that I see a lot of guys running simular to this vs a more traditional setup Like a bell and carlson medaliat? Weight? I would assume the ergonomics are similar and I really enjoy the styling of the medalist. Sorry for all the questions but the only precision rifle info I'm able to get is from TH-cam or forums. Unfortunately I'm unable to put my hands on many setups.
probably because a lot of people buy savage because its cheap, and most chassis are expensive. xlr makes a great savage chassis though. also most savage shoot very well out of the box, whereas many remington 700 require modifications to get them to shoot well, and people buy remingtons expecting that.
Thomas Jackson It's unrewarding for aftermarket parts guys to make stuff for Savages because Savage keeps changing their rifles. In their 10 (short action) and 110 (long actions) they have had controlled round feed, push feed, staggered feed, single feed, 4.425" action screw spacing, 4.440" action screw spacing, side bolt release, bottom bolt release, standard DBM, and Axis DBM, and far more. Go to Boyd's Stocks, and use the drop boxes on the top left. Select Savage in the first one. Then look at the options in the second one. So a company comes out with a part for Savage rifles, and then the next year Savage changes their gun and that part doesn't work anymore. If they quit that nonsense, they'd have a far larger market share. Lots of people buy rifles based on the available aftermarket for them.
spraynpray I had no idea. It makes total sense though.. With Rem going through a rough patch and the quality of their product not what it used to be "imo" I was looking forward to building off my Savage action. With the Rem being as modular as it is its most likely the best bet. It's nice to know there is some options though. Tyvm for the comment.
I hear you on the metal / polymere cold temp thing. I can shoot a plasticgun all day long in way colder condition than a metalhandle-gun in warmer still cold weather
is it just me or does it look like the back half of the stock sags in the middle of the chassis? (right where the back half meets the front half in the middle of the action)
@8541 I'm about to pull the trigger on the X-Ray chassis for my Tikka T3X Varmint 223. Are you using MDT 223 magazines in the video? If so, any feeding problems?
Great review! This might be a good setup for the 6.5 Creedmor I'm planning to get. That makes me rethink what action I might get, though, since you said KRG only currently makes the X-Ray chassis for the Rem 700 and Tikka T3. Sill question, but what are the best sources for rifle actions, assuming you want to save money by not having to buy the entire rifle? Thanks!
Hey John, thanks for the review and good to see the new videos. What is the bipod and mount you are running there? One thing worth mentioning about this chassis is that with the buttpad all the way up (where I happen to like it) my cleaning rod doesn't align with the bore. I have to dismantle and lower the spacer assembly to clean. It's one of my few complaints about this set up. Keep up the good work. Thanks.
Great video. I am considering this chassis and others. How is the forend removed from the backbone on this chassis? Is it a slide on / off, notched on, bolted, or some combo? Thanks
+William Dunne While we have not been able to shoot one, the 180-Alpha feels as good as the X-Ray. I would not have any reservations in purchasing one.
Hey john, I noticed at 1:28 your primers look to have been sealed by a sealant of some kind. I know you load your own ammo so I was wondering was this done by you or is this one of those times you were required to shoot factory ammo in a match somewhere? I am a reloader also and was considering the benefits of sealing my primers and wanted to know if you can give me any info on it?
***** Only time I seal primers is for hunting. Not really needed, just a safety blanket. Makes you feel secure when you know you pull the trigger it goes boom, and you get that 12 pointer.
So the forend that comes on the X-ray is polymer correct? Did you have any/could you foresee any sag or flex in the forend when free floating a heavy contour barrel? I've had this problem with HS precision stocks.
I'm talking about the forend it's self flexing. Not where it connects. I'd have to show you a picture to really explain what I'm trying to say haha. Like my HS precision stock for example, at the end when it's sitting on the bipod the stock sags and comes in contact with the barrel where it's supposed to free float. I had to sand it down. It stop sags but I took enough material off so it doesn't contact the barrel
The aluminum backbone runs the entire length of the barrel channel. The aluminum channel would have to flex to cause contact on the barrel. That would take an amount of force that would be beyond what you could apply under normal use.
+stealth Andy I am not sure I understand the question. Are you asking why you should buy a $500 Chassis for a bolt action rifle instead of buying another rifle?
Thanks !! I will have to wait and see. If I have enough money id probably get the wiskey 3. Im planning to put a tikka t3 varmint stainless in it with a vortex viper pst scope.
No. It is generally used to describe the size of the receiver or what class of cartridge it will accept. Although both .308 and .30-06 are the same bullet size and same bolt head diameter, the .30-06 is a "long action" cartridge because it will not fit in the magazine of the short action receiver.
Realize this is a really old video so shot in the dark here...
Does the polymer affect capability at all? Looking for a budget chassis as I cant afford another MDT chassis, so was looking at the Oryx, but the xray is intriguing with a little less weight.
Ultimately would be going on a .300WM that I would like to use for hunting as well as long range.
With the 2.4lb HS Precision stock it came with, it's already getting a bit hefty to carry for hunting due to the Sendero barrel, so this has peaked my interest.
All of these chassis use an aluminum backbone or bedding block. So the plastic is just the part you are touching. Depending on the specific construction, you may notice a difference in the recoil impulse, but accuracy will be good with any of them.
When they have a Howa 1500 short action inlet I'll buy two.
This chassis has everything I need and nothing I don't
Awesome review once again John! KRG is lucky to have such a professional reviewing their product!
This chassis is VERY interesting to me, from a weight and cost perspective..
It might be a stupid question, but what mags does this chassis take? PMAGS?
I would assume that a Rem. PSS LTR would fit this chassis nicely/function with the mags ok?
I love this chassis do you yhink the R700 sps tactical 16.5" heavy barrel will fit into this chassis? If so this is the one I am going to get.
AND WE ARE GOOD TO GO
the number of the day was 7. 7 good-to-gos
Your reviews are very informative and you are a great speaker no ums or ahs like a lot of other reviewers.
Thanks.
Agreed. Possibly the most articulate gun reviewer on TH-cam. Likely drawing from LEO experience.
Nice review John. It's a good looking Chassis.
Could you review the mpa ba chasis system please
what model of bipod are you running on this rifle
J.smith
Atlas
Will you post some range time video with this stock?
LRSU on there TH-cam channel has lots of range time with this set up I got my set up like this Tikka action in 6.5 from one of them
Hope to see you review the new Mega Arms chassis. Maybe even the new Magpul chassis as well.
my version is the Remington long action and has q d sling mounts at the front and the rear of the chasis
Ortiz Islands
How does this compare to the Bravo Chassis?
Bravo is the one that favors the basic stock. It has more aluminum material in the bottom rails, butt stock and forend. Soon I'm going to order one.
Bosco Estates
Abbie Ports
apparently it's good to go
Ashtyn Underpass
Always come close to buying one but cant get my head arpund the fact the front and back section doesnt mate properly. The lines are off below the action and not straight. My OCD just cant get past it. Kind of looks like 2 different chassis front and back squished together at the magazine well.
Its just the plastic skins, nothing of importance is actually misaligned. But I feel you on that. Bothers me too
i hope they come out with one in the $60-$100 range.
Lol. You'll be hoping till guns go out of fashion.
Ondricka Crossroad
I can see it now. Someone going to start stippling it like a Glock due to its polymer makeup. Nice video. I hate my timney triggers pin sliding out as well.
honestly I think I like this more than the xray as long as you don't need a folder its lighter same bedding block and isn't affected by heat as much plus it saves money to get nicer glass
What about the left handed people?
Leannon Turnpike
if you had to chose between this and MDT LSS.. what would you go for ?
I am looking at both those chassis as well. I like the Xray because its longer to put your bipod out further and has a flat bottom make it easier tp shoot off surfaces. Also I like that its polymer exterior in case I bang it around. Anoth plus that is just mg preference is that I love the way this chassis looks. Good luck.
The KRG X-ray is more rigid and you will be able to mount a bipod further forward for more stability, whilst the MDT LSS is more modular. I just ordered the X-ray myself :)
Leon K They end up being almost the same price once you add the pistol grip and stock to the LSS. The X-ray is more rigid and has more mounting sections for accessories. it is also a bit longer so your bi-pod if further away. I see this as an advantage, but it's debatable. I'm going with the x-ray but the LSS does give your more customization with it's modular grip and stock system.
Leon K If you havent bought yet, MDT is making an LSS XL chassis with a longer fore end.. could be the ticket for you.
The actual direct competition from MDT is the HS3, similar design and a little less bulky. Here in Canada the MDT is easier to find and get due to not needing an importer as this does. Both are nice stocks but the KRG is too bulky for hunting.
Cecil Meadows
Aiyana Rapids
I chose this chassis for my first precision rifle build. threw a 700 AAC-SD in it with a primary arms FFP 4-14 power scope, AAC non mount brake, and i couldn't be happier. it's GOOD TO GO!! ;)
Kaitlin Passage
Hey Rex what do you think of this set up, Tikka T3x Stainless Varmite
7mm Remington magnum with a viper PST 4-16x50 FPP with a KRG X-Ray Chassis. Please give me your Blunt thoughts on it thanks!
John, I'm working with a unmodified Remington 700 SPS Tactical .308 with the junk Hogue stock and need to get consistent precision with it. It is for use as a LE sniper rifle. Would you recommend this chassis as a good replacement? I've been eye balling this chassis or possibly the KRG Bravo to drop the factory action/barrel into. What are your thoughts/recommendations? Do you know how a factory heavy barrel performs in this chassis? Thanks!
Hi John, great video. Care to share the specs on that rifle of yours there, including the weight? Did you also find the chassis weight to meet the advertised spec of 3.1 lbs? Thinking about this chassis for a defiance receiver and a timney or jewell. Thanks!
Hoeger Estates
Would you prefer the X-ray or the MDT ESS Chassis? Looking for a chassis for my Tikka T3x in .223. I know the industry likes bigger calibers for chassis guns but I can afford to shoot a lot on this rifle and my absolute longest range is 600 yards.
Dakota Terrace
Davis Ferry
John McQuay do you have an after-market barrel in this video? If so, what is it and by whom?
Thanks for doing the videos. Some have been helpful for me as I have built my first LPR.
Good evening Mr. McQuay,
Just checking whether it's just me or the camera angle but it seems to me that there's a bend next to the charging handle (where the back meets the front). Really nice chassis otherwise. Can't wait to get one on my R700. Thank you so much and hopefully your kid feels better soon (instagram)
I'm paying on this set up in 6.5 Creedmoor Tikka action. Watching your review I've learned more about it.
Hey i have a question.
I bought whiskey 3 gen 6 folding stock.
Im very upset with length of pull part.
To feel comfortable i need to pull out all the way but no matter how hard you tighten it still shakes.
From customer service i received an answer dont pull all the way out.
Now is it possible to replace folding stock to fixed stock from x ray shassi to my wiskey? Thank you very much?
Will the Remington 700VTR 308 with the triangular barrel fit into this stock.
Very good vidéo for people like me on the market for a new chassis.I will buy in UK the green Sako one for my Tikka 6.5 CM.
Turner Ramp
Ledner Alley
Will anybody bring out a system for the 770..... I have a couple of them and would like to build an awesome rifle out of one....
Hi John, I was wondering if you had noticed the small amount of tilt between the buttstock and the chassis? I am somewhat OCD, so I shimmed the back down with a guitar pick, worked great.
any right/wrong on the action screw torque? krg xray instructions torque no more than approx 50 inch pounds.
Are these available in a left-handed format for a Tikka T3? I went to the site but I couldn't find any info on left handed platforms.
Pouros Manor
can a KRG X-ray be used in conjunction with a 7mm rem mag tikka T3? or do I have to get a new action/barrel?
KRG offers a sling mount to bolt onto the X-ray now.
www.kineticresearchgroup.com/index.php/products/ambi-sling-mount
For the price and quality nothing beats XLR element chassis. And their customer service is top of the line.
Would you take this chassis over something like the AICS from AI? (value wise)
Which one would you choose? KRG X-Ray or XLR Industies Element?
Very nice looking chassis for the Remington 700 but do they make them for the Remington 770 300 wm by any chance
Does it do 223 and 6.5?
I have a rem 700 and a savage. Is there a reason most aftermarket chassis, stock manf don't make a system for the savage models? Lately I find myself enjoying my Savage over my Rem.
I'm ready to do some up fitting on my rifles. What are the pros of going with a chassis system that I see a lot of guys running simular to this vs a more traditional setup
Like a bell and carlson medaliat? Weight? I would assume the ergonomics are similar and I really enjoy the styling of the medalist.
Sorry for all the questions but the only precision rifle info I'm able to get is from TH-cam or forums. Unfortunately I'm unable to put my hands on many setups.
Actually, the same company, KRG, just introduced a chassis for the Savage - the 180-A.
probably because a lot of people buy savage because its cheap, and most chassis are expensive. xlr makes a great savage chassis though.
also most savage shoot very well out of the box, whereas many remington 700 require modifications to get them to shoot well, and people buy remingtons expecting that.
Okay, thanks for the replies. More of carbine guy but wanting to get more into precision.
Thomas Jackson It's unrewarding for aftermarket parts guys to make stuff for Savages because Savage keeps changing their rifles. In their 10 (short action) and 110 (long actions) they have had controlled round feed, push feed, staggered feed, single feed, 4.425" action screw spacing, 4.440" action screw spacing, side bolt release, bottom bolt release, standard DBM, and Axis DBM, and far more.
Go to Boyd's Stocks, and use the drop boxes on the top left. Select Savage in the first one. Then look at the options in the second one.
So a company comes out with a part for Savage rifles, and then the next year Savage changes their gun and that part doesn't work anymore. If they quit that nonsense, they'd have a far larger market share. Lots of people buy rifles based on the available aftermarket for them.
spraynpray I had no idea. It makes total sense though.. With Rem going through a rough patch and the quality of their product not what it used to be "imo" I was looking forward to building off my Savage action. With the Rem being as modular as it is its most likely the best bet. It's nice to know there is some options though. Tyvm for the comment.
These poly chassis are cool but they can reduce the price alot more. They are making a killing with dirt cheap materials.
Kamille Tunnel
I mounted my Remington 700 with a Timney trigger on an X-Ray chassis and it did need some machining in order to make room for the safety pin.
I hear you on the metal / polymere cold temp thing. I can shoot a plasticgun all day long in way colder condition than a metalhandle-gun in warmer still cold weather
Luettgen Ramp
What is mounted on the rifle that is shown at the range? Not the USO but the other.
Thanks
They should make a AK part that's similar to that mag release on this rifle, would be awesome
is it just me or does it look like the back half of the stock sags in the middle of the chassis? (right where the back half meets the front half in the middle of the action)
That magazine movement, when you operate the bolt scares me...
What tikka model is this rifle before putting on the X-ray?
Im about to get one of these with a la105 woomera looking forward to this combo !
Is there enough material in the fore-end that I could drill and install a flush cup in the front side of the fore-end?
What would you choose between the xray and an xlr element chassis?
Leuschke Hollow
Very good review as always, must check out if they will export this!
Hey John! Would you choose this over the HS3? Any advantages of one to the other?
What Bipod are you running on this rifle ?
Late to the game, but is this compatible with the t3x ctr?
Hey John,
Is that wiggle in the magazine i per reload ok?
@8541 I'm about to pull the trigger on the X-Ray chassis for my Tikka T3X Varmint 223. Are you using MDT 223 magazines in the video? If so, any feeding problems?
The MDT mags are a snug fit in the KRG. We used the .308 version while testing the X-Ray.
Great review! This might be a good setup for the 6.5 Creedmor I'm planning to get. That makes me rethink what action I might get, though, since you said KRG only currently makes the X-Ray chassis for the Rem 700 and Tikka T3. Sill question, but what are the best sources for rifle actions, assuming you want to save money by not having to buy the entire rifle? Thanks!
Get a barreled action.
Hey John, thanks for the review and good to see the new videos. What is the bipod and mount you are running there? One thing worth mentioning about this chassis is that with the buttpad all the way up (where I happen to like it) my cleaning rod doesn't align with the bore. I have to dismantle and lower the spacer assembly to clean. It's one of my few complaints about this set up. Keep up the good work. Thanks.
Atlas bipod for sure, can't tell what mount though
Does the original magazine of Remington Model 700 and Tikka T3 fit into the X-Ray chassis?
No
Have you/can you use the new Magpul AICS pattern mags with the X-ray chassis?
Five and Ten round versions fit and drop free. I have not function checked them yet, but I have no reason to believe they won't work.
I am leaning towards one of these as the new home for my 700 AAC-SD. I won't miss the OEM stock.
What magazine are you running?
Great video. I am considering this chassis and others. How is the forend removed from the backbone on this chassis? Is it a slide on / off, notched on, bolted, or some combo? Thanks
It is screwed on from the bottom.
4:38, he just calls everyone fat
How long is that barrel?
John - 5yrs later what is your opinion on the X-ray? Especially vs all the other chassis's now available at this price point
I feel like the entire chassis being polymer makes the entire rifle feel cheap in a way. Also the non removable grip sucks....
any word on the quality of the savage version of krg's chassis ?
+William Dunne While we have not been able to shoot one, the 180-Alpha feels as good as the X-Ray. I would not have any reservations in purchasing one.
Left handed version?
Is this compatible with Tikka T3's Long Action?
Roge Saint sadly no!
Thats a sweet rifle, but that shirt is whats really catching my eye. This will be a big year for that. Thanks for all the videos.
This aged like milk 🥛
Hey john, I noticed at 1:28 your primers look to have been sealed by a sealant of some kind. I know you load your own ammo so I was wondering was this done by you or is this one of those times you were required to shoot factory ammo in a match somewhere? I am a reloader also and was considering the benefits of sealing my primers and wanted to know if you can give me any info on it?
Vapor Trails That was factory ammo. I don't worry about sealing primers.
***** Only time I seal primers is for hunting. Not really needed, just a safety blanket. Makes you feel secure when you know you pull the trigger it goes boom, and you get that 12 pointer.
So the forend that comes on the X-ray is polymer correct? Did you have any/could you foresee any sag or flex in the forend when free floating a heavy contour barrel? I've had this problem with HS precision stocks.
The forend is polymer, but it bolts to an aluminum backbone that actually makes up the barrel channel. No chance of any sag or flex.
I'm talking about the forend it's self flexing. Not where it connects. I'd have to show you a picture to really explain what I'm trying to say haha. Like my HS precision stock for example, at the end when it's sitting on the bipod the stock sags and comes in contact with the barrel where it's supposed to free float. I had to sand it down. It stop sags but I took enough material off so it doesn't contact the barrel
The aluminum backbone runs the entire length of the barrel channel. The aluminum channel would have to flex to cause contact on the barrel. That would take an amount of force that would be beyond what you could apply under normal use.
Cool shirt!
I always enjoy your videos . but why? ? use $500 on that when I could bey a new rife or ar15 . thanks for sharing an ya time
+stealth Andy I am not sure I understand the question. Are you asking why you should buy a $500 Chassis for a bolt action rifle instead of buying another rifle?
@@8541tactical I believe that some ppl don't understand that 500 gives you a basic AR probably not even a 2232 wylde
wich chassis would you recommend ? The krg x ray or the mdt tac 21.
X-Ray. The Tac-21 is cool, but WAY heavy for what it is.
Thanks !! I will have to wait and see. If I have enough money id probably get the wiskey 3. Im planning to put a tikka t3 varmint stainless in it with a vortex viper pst scope.
Does short action and long action depends on the rifle range ?
No. It is generally used to describe the size of the receiver or what class of cartridge it will accept. Although both .308 and .30-06 are the same bullet size and same bolt head diameter, the .30-06 is a "long action" cartridge because it will not fit in the magazine of the short action receiver.
@@JohnMcQuay thank you for your review this is my first chassis system.
What are the polymer magazines that are used?
Those are MDT polymer mags. We will be reviewing the production version.
Found em. Do they ever plan to make these .300