How to Replace Front Wheel Bearing and Hub 2007-14 Cadillac Escalade

แชร์
ฝัง

ความคิดเห็น • 30

  • @TRQ
    @TRQ  3 ปีที่แล้ว

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

  • @FieroWipeout
    @FieroWipeout 2 ปีที่แล้ว +2

    Short, to the point, with torque specs, a good view of each step, and actually doing things the right way. This is the gold standard of vehicle repair videos.

  • @tobinisenberg1701
    @tobinisenberg1701 11 หลายเดือนก่อน

    Thank you for the video, clear, straight forward instructions. I replaced the hub on a 2007 escalade and instructions were spot on. Some tough bolts to break free, but the hub wouldn't budge. I hit it on the one back side with a hammer, nothing. I then pulled the sledge out and a couple firm hits and it broke free. Everything went together fine. We had the passenger hub replaced by a shop and it was over $700, About a hour to hour and a half work, $200.00, done!

  • @forestfyreman
    @forestfyreman ปีที่แล้ว +1

    First time viewer and this is by far one the best DIY video for laypersons as it relates to auto repair. No extra ad libs or music. Just simple and straight to the point. Camera angles were excellent too! Good job fellas!

  • @charlespayne1909
    @charlespayne1909 4 ปีที่แล้ว +2

    As acting mayor .
    Im saying you guys are top tier
    For the how to videos.
    You guys are like HAYNES, Chilton, motor, Mitchell car MANUALs all in one socket set.

  • @marlonsmith6992
    @marlonsmith6992 ปีที่แล้ว +1

    Thank you!!!! I just saved a ton of money, bought the part and replaced both.

  • @davew102
    @davew102 7 หลายเดือนก่อน

    It was an easy job, thanks to the helpful video. A bit more hammering to get my hub off, but it was expected after 240K miles. Thanks!

  • @emjoy925
    @emjoy925 4 หลายเดือนก่อน

    To the crew @ TRQ i am so grateful i found you. Your how to videos are on point. Clear. And easy to follow. I have recommended TRQ to everyone I know. We currently have 1 2009 Cadillac Escalade Hybrid. And 2 Cadillac CTS-V’s. 1st & 2nd generations. We thank you for all of your help.
    🛠️🪛🛞🛞🖤❤️💛

  • @rockiemountin7535
    @rockiemountin7535 3 ปีที่แล้ว +5

    You guys do great videos but I must say I’ve never had a wheel bearing assembly come out that easy I always have to beat the crap out of them they use a lot of salt on these roads

    • @TRQ
      @TRQ  3 ปีที่แล้ว

      +Rockie mountin Thanks for the feedback! 1aau.to/m/Shop-TRQ

  • @yourhowhigh6635
    @yourhowhigh6635 4 ปีที่แล้ว +2

    That you for the list of tools! going to make this repair much easier

  • @AymanDweikat
    @AymanDweikat หลายเดือนก่อน

    Thanks man; as skilful as ever

  • @MoneyinthebagproductionLLC
    @MoneyinthebagproductionLLC 2 ปีที่แล้ว +1

    Thank you it’s not as hard as I thought it was💯

  • @charlespayne1909
    @charlespayne1909 4 ปีที่แล้ว +1

    Thanks guys for how to videos

  • @Twoorang3s
    @Twoorang3s 5 หลายเดือนก่อน

    Great video

  • @bigpopparich3
    @bigpopparich3 4 ปีที่แล้ว +2

    I'm looking to do this at home with just a jack, is it possible? Also would you believe that I would have enough leverage ?

    • @ryank5022
      @ryank5022 3 ปีที่แล้ว +1

      You should. I've done it quite a few times like that.

    • @rockiemountin7535
      @rockiemountin7535 3 ปีที่แล้ว +3

      I’m not sure what part of the country you live in but I live up here in the Northeast the New Hampshire area were they use a lot of salt on the roads and I’ve never seen a bearings assembly come out that easy I always end up using a lot of PB blaster big hammers and chisels to get the thing out but again they use lotta salt on these roads and things rust up pretty bad here

  • @jamesguralski5156
    @jamesguralski5156 2 หลายเดือนก่อน

    Hey! I need the front dist shield for the hub and brakes! Do you have a link?

  • @BigMikeSaylor
    @BigMikeSaylor ปีที่แล้ว

    Great video!

  • @brandonWilliams-vc8my
    @brandonWilliams-vc8my ปีที่แล้ว

    fyi for the 2wd hubs, you won't have an axle nut to remove, this is for the all wheel drive models

  • @manzanoosa
    @manzanoosa ปีที่แล้ว

    Love this thank u

  • @jncjr83
    @jncjr83 4 ปีที่แล้ว +5

    144lb ft torque? In my day you know how many lbs we used? Until we couldn’t twist it anymore

    • @alexhendrickson5528
      @alexhendrickson5528 3 ปีที่แล้ว +2

      thats why you go through wheel bearings alot more. too tight messes up the bearing

  • @Keithclotfelter
    @Keithclotfelter 4 ปีที่แล้ว +1

    Excellent demonstration thank you. Is it not advised to use an impact wrench to break free the hub assembly and caliper bracket bolts?
    I'll be doing this job on jackstands and may not have the leverage for a big breaker bar.

    • @FieroWipeout
      @FieroWipeout 2 ปีที่แล้ว

      In my experience, you can almost never get an impact on the hub assembly or caliper bracket bolts, there isn't enough room.

  • @rackaddict8227
    @rackaddict8227 2 ปีที่แล้ว

    Would this be the same procedure for a REAR wheel bearing replacement on a 2016 Escalade ESV?

  • @corysmith5316
    @corysmith5316 6 หลายเดือนก่อน

    Yeah but what if the wheel bearing broke in half and now the other half is stuck in the Knuckle.

  • @emjoy925
    @emjoy925 4 หลายเดือนก่อน

    To the crew @ TRQ i am so grateful i found you. Your how to videos are on point. Clear. And easy to follow. I have recommended TRQ to everyone I know. We currently have 1 2009 Cadillac Escalade Hybrid. And 2 Cadillac CTS-V’s. 1st & 2nd generations. We thank you for all of your help.
    🛠️🪛🛞🛞🖤❤️💛