Build voron afterburner with Mellow tout métal nf-crazy-A Hotend fr.aliexpress.com/item/400125... Thanks for the team voron design vorondesign.com/ thank you for watching
Got that Mellow NF Crazy - not sure, which printed parts to use for the hotend. Are there any special parts for Mellow NF-Crazy or simply use the mosquito-3D-Parts ?
Not really big benefit against the normal version , but helps more if you wanna increase your print speed little bit or use a bigger nozzle like 0.6 for example
Thank you I use white lithium grease MG Chemicals 8461-85ML Graisse au Lithium, Blanc www.amazon.fr/dp/B005T8OBP8/ref=cm_sw_r_em_apa_i_M2X8Fb27HCD28?_encoding=UTF8&psc=1
Thank you, if You mean the bmg kit from here € 20,64 6%de réduction | Thingiverse BMG - Kit d'entraînement de base pour un grand joueur, objet bricolage, ender 3 CR10, CR10S, Tevo Tornado divers grands travaux a.aliexpress.com/_vbuLCb
Not much, I don't have hemera but the point for me is swapping different head ex between the E3D V6 and mosquito easily 😉 I have 2 heads One for speed print with 0.6 nozzle 2nd with 0.4 for more fine print And this huge point for me especially with a large print volume 👆
Hi, I can juste remove 2 screws from head mounting support (built and prope housing) , 20 and 30mm and fix it on x-carraige ( when I will receive the reste of components ) 😁
It is difficult to print tpu on voron2.4, and the precision of the extruded gear position is not enough, which leads to stuck consumables! Is there a solution?
i have printed TPU with the AfterBurner without any issue try to check the filament path and see if there is not any friction , clear out the the path with 2mm drill bit and see
@@rarih100 I tested it many times and adjusted the extruder stl file to achieve more accuracy. But there will still be material jams, the reason may be because the middle point of the two extrusion wheels is still offset!
@@rarih100 There is another question, it is difficult to print tpu, is it related to the length of the cooling pipe? Some people say that the extrusion is too long, which will make the tpu more difficult to print.
@@haojin652 i am not sure what is the cooling pipe is , but that's not matter if you Hotend fan work very well like any printer in the world , you have to play with your setting and find adjust all this but i confirm this head print a TPU without problem i tested this
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 3](http://i.ytimg.com/vi/A1XXYbV048k/mqdefault.jpg)
Like the video, very helpful - only the autofocus causes some headache while watching.
Yes I know 😬
@@rarih100 Should have cut it differently... could have made it much better...
having seizures here ...
Setting manual focus helps for this type of video :)
Nice to see everything going together so thanks.
OMG, this thing is huge compared to the pocketwatch. Thanks for both videos!
Autofokus OFF!!!
OMG that music is causing headache
and the autofocus
Thank you. May reference this when I throw mine together.
The Autofocus did you dirty :D Depending on the camera u have, u can lock the autofocus.
very nice keep them coming
Best of best!!!
Good job!!
nice video, thanks.
nice video but sheesh your camera focus gave me a seizure.
Yes i'am sorry about that 😩
Got that Mellow NF Crazy - not sure, which printed parts to use for the hotend. Are there any special parts for Mellow NF-Crazy or simply use the mosquito-3D-Parts ?
noticed that the magnum version of the crazy hotend being used. is there a reason? for printing higher speed? or for ABS printing?
Not really big benefit against the normal version , but helps more if you wanna increase your print speed little bit or use a bigger nozzle like 0.6 for example
what type of grease/compound are you using for all the metal parts?
MG Chemicals 8461-85ML Graisse au Lithium, Blanc www.amazon.fr/dp/B005T8OBP8/ref=cm_sw_r_em_apa_glt_i_PY4YW4T8KAVQ0A6A8Y63?_encoding=UTF8&psc=1
cant your share nf crazy for afterburner toolhead?
Great quality of plastic parts! What ABS did you use?
I used fiberology ABS red and black ASA formfutura
@@rarih100 What printer you used to print parts ? How big was infil and layer height ? Compensation on parts ?
@@unitrauser prusa mk3s
hi, love your video, can i ask what grease did you use?
Thank you
I use white lithium grease
MG Chemicals 8461-85ML Graisse au Lithium, Blanc www.amazon.fr/dp/B005T8OBP8/ref=cm_sw_r_em_apa_i_M2X8Fb27HCD28?_encoding=UTF8&psc=1
@@rarih100 thanks a lot :)
Hello. I'm looking for this extruder design file. But I can't find it on voron's official website. Please send me the stl file link. Thank you
very helpful video, I want to know where to buy the white gear?
Thank you, if You mean the bmg kit from here
€ 20,64 6%de réduction | Thingiverse BMG - Kit d'entraînement de base pour un grand joueur, objet bricolage, ender 3 CR10, CR10S, Tevo Tornado divers grands travaux
a.aliexpress.com/_vbuLCb
Could you give us your option on the quality of the NF-Crazy?!
If I understand, you need to know if the NF crazy better than e3d?
I’m liking this extruder and hotend. Where can I buy one? Your link to Ali is dead
€ 23,97 20%OFF | Buse Mellow tout métal nf-crazy-A Hotend V6 pour Ender 3 CR10 Prusa I3 MK3S Alfawise Bmg extrudeuse pièces d'imprimante 3D
a.aliexpress.com/_B1etzq
What would be the advantages of this extruder over a E3D Hemera?
Not much, I don't have hemera but the point for me is swapping different head ex between the E3D V6 and mosquito easily 😉
I have 2 heads
One for speed print with 0.6 nozzle
2nd with 0.4 for more fine print
And this huge point for me especially with a large print volume 👆
@@rarih100 Excellent point. That is something I can benefit from too. Thanks!
How will you mount it on the rail if you have already assembled it?
Hi, I can juste remove 2 screws from head mounting support (built and prope housing) , 20 and 30mm and fix it on x-carraige ( when I will receive the reste of components ) 😁
@@rarih100 ok, I haven't build it yet, so I asked
It is difficult to print tpu on voron2.4, and the precision of the extruded gear position is not enough, which leads to stuck consumables! Is there a solution?
i have printed TPU with the AfterBurner without any issue try to check the filament path and see if there is not any friction , clear out the the path with 2mm drill bit and see
@@rarih100 I tested it many times and adjusted the extruder stl file to achieve more accuracy. But there will still be material jams, the reason may be because the middle point of the two extrusion wheels is still offset!
@@rarih100 There is another question, it is difficult to print tpu, is it related to the length of the cooling pipe? Some people say that the extrusion is too long, which will make the tpu more difficult to print.
@@haojin652 i am not sure what is the cooling pipe is , but that's not matter if you Hotend fan work very well like any printer in the world , you have to play with your setting and find adjust all this
but i confirm this head print a TPU without problem i tested this
@@rarih100 Okay, thank you for your affirmative answer. I feel safe in my heart! I will adjust
Hi bro, you can give a link to the kit for the extruder. And then the links stopped working.
If you talking about the NF mosquito it's no more available, discontinued version
weight? its look nice but that add weight
I take it this is just a reference. Now you can't attach it to the linear rail...
hi, do you have the link for stl for the extruder?
Hi Visit voron design github on vorondesign.com
oh my god focus…..😅
how it prints?
It's print good 😊
Hand-focus, didn't hear😡
Educational video but that in and out of focus crap was awful. I had to give up watching the video and find something else.
I'am sorry about out of focus 😔, there definitely another videos showing how to mount after burner out there