Cut anything, even diamond
ฝัง
- เผยแพร่เมื่อ 31 ต.ค. 2023
- Head to brilliant.org/BreakingTaps/ for a free 30-day trial. The first 200 people will also get 20% off their annual subscription.
Watch this video ad free on Nebula: nebula.tv/videos/breakingtaps...
Today we're looking at an ion milling machine. This instrument accelerates argon particles to high velocities and then slam them into your sample, acting as an atomic sandblaster. The sample is slowly etched due to the transfer of kinetic energy from the argon gas molecules. It can etch literally any material, even diamond!
🥰 CONSIDER SUBSCRIBING 🥰
🔬Patreon if that's your jam: / breakingtaps
📢Twitter: / breakingtaps
📷Instagram: / breakingtaps
💻Discord: / discord - วิทยาศาสตร์และเทคโนโลยี
What are those little "whiskers" on the diamond?
Carbon adhesive goop, just an artifact from imaging 😅 I scanned the top of the diamond, then rotated it to get more of the profile. Apparently the carbon adhesive dot that's used to hold it down left some whiskers of polymer behind after I rotated it. Meant to put a caption on screen about that, but totally forgot!
You read my mind. I was wondering what those things were.
Thanks for the explanation and thanks for another really interesting video.
Very epic, be interesting to see what else you can do with it! ❤️🔥🫡
I appreciate the 30uM rick roll. Good stuff. Looks like a fun new toy.
In 3D printing terms, we call that "stringing". In Ion Blasting terms, we call that "no damn clue"
7:50-8:10 How do you analyze the sample for different elements?
Those cross sections look incredible and your animations from Blender are great. Thanks for sharing.
ngl, the animations were one of my favorite things in this video!
Robo Zollo mass commenter strikes again.
The chip research group I used to work at used a focused Ion Beam (FIB) to do chip repair and modification for prototype chips. We can go in and even deposit resistive material, or build up entirely new probe pads to connect to the center of a circuit to debug things. Pretty cool stuff, very expensive machine.
The dummy filling process has made it much more challenging to get to the lower metal layers, and as a result we have to be clever about it when we etch or design.
Super cool! FIB is such a neat technique in general, but really cool that it's used to repair or alter chips. The deposited material is done by GIS right? Inject a gas and let the ion beam chemically alter/bond it to the sample?
Did not know it is possible to repair a chip. 🤯
@@BreakingTapsI'm not really that familiar with the practical process - I was lucky enough to never need my chips tinkered with after we got them back from the foundry. We have one guy in the group who is the expert and spends a lot of time on the machine. There is a lot of 'Fingerspitzengefühl' involved with getting all of the parameters working optimally to get good etching and so on without destroying the underlying chip through stress etc. Main way I have seen it used a few times is to kill unwanted oscillations in unstable millimeter-wave amplifiers. At some point someone was even putting in resistors to reduce gain (and thus chance of oscillations) that could be connected if there were some issues after manufacturing.
You can also trim resistors with it, but usually it is much easier to do that with a laser - unless you need to be really precise, or want to deposit too, using a precision laser to cut traces is much more (cost) efficient. Added bonus that the learning curve for the laser is sufficiently low so PhD researchers can operate them by themselves, unlike the FIB which requires high vacuum, expensive gas mixtures, and in general a lot of training. I remember a situation where a researcher was building custom diodes for plasmonic detection from scratch, and each diode involved >5kUSD worth of tungsten-deposition gas or something.
@@BreakingTaps The precursor gas (e.g. W(CO)6 for tungsten deposition or XeF2 for silicate etching) sorbs onto the surface, forms a monolayer, and reacts slowly or not at all until activated/decomposed by secondary electrons from the ion beam scanning a particular part of your sample.
So for deposition you get W (and some C and O impurities because the process isn't perfect) on your sample surface with the CO sucked out by the vacuum system.
For etching, the F2 reacts with your sample and the Xe is removed.
You can get the same effect using the electron beam in a dual beam system (or even a SEM with GIS - a rare but not unheard of combination) but it's much slower than with FIB due to the lower activation energy and beam current. It's sometimes useful for things like protecting super fragile samples with a thin metal film before doing more deposition with the ion beam, or doing chemical staining (with no sputtering) to selectively etch regions of a sample.
@@AndrewZonenbergHah, Fancy meeting you here!
Really nice work with the Blender viz in this video - Blender's particle engine and the molecular script can be a pain to work with, but you got them looking great, and even showing real-world behaviour!
Thanks! Definitely took a lot of tweaking and fiddling to get it doing something close to what I wanted. But pretty happy how it turned out!
Wait, what?
You can simulate particle physics in blender?
I’ll Google it later…
Any pointers or code?
@@BreakingTaps you should definitely be happy with it! If you’re interested in some more blender science visuals, there was a fantastic talk at the blender conference last year about rendering proteins at world-record speeds. It’s up as a VOD on the Blender youtube channel.
broo where u get that pfp? thats so fricking cool
@@dewakbarr i made it! in blender :D its from a short film on my channel
The thing I absolutely love about this incredibly underrated channel is that I learn so so much about things I wasn't even aware existed. And even for things that aren't even covered but merely mentioned, allowing me to delve into another subject on the internet.
Thank you so much for what you do. You are a treasure.
It'd be really cool to have a video series following you troubleshooting lab equipment like this.
Awesome blast from the past! I used the exact model of machine for my university diploma thesis some 20+ years ago. It had the roughing pump (a diaphragm style pump inside the case though). Brings back memories... Hours and hours of disassembling and cleaning the etching gun, even the tiniest metal flake could short out the HV.
Did he just rickroll us at the atomic scale?
was looking for this comment. I thought the same.
Yes. Yes he did.
@@darth_dan8886funnily enough I was looking for this exact reply
Rick will never give you up. Nor will he let you down.
I am not sure. But all these extremely tiny things make me feel very good about myself.
I remember using these all the time during my doctorate program. I took so many cross sections of through-silicon-vias (TSVs) and surface micro-bumps, testing ways to stick chips together. I also remember using these machines to place in some "bodge wires" and fix up some very tiny pads (even sometimes those little bumps themselves) on prototype dies. Fascinating machines and incredibly powerful tools in the semiconductor world, but I've very glad my work is all computational now, as these things take forever to go from step to step compared to logic and signal simulations I can just let run.
Never a dull video, it's awesome knowing I'll learn something super cool when you post! I wonder how feasible making a motion system for it would be, maybe nab the JWST flexture mechanism?
It has definitely crossed my mind! Would be nice to replace the existing sample stage (since it's missing parts already), so might be neat to replace it with a little XY stage
The world needs more of this and less noise. Incredible stuff as always.
Love how you explain. Complex topics but very easy to understand.
Yet again you show me one of the cooler things I have seen in awhile. (The last was that stop motion animation using the electron microscope.) This really is a neat bit of kit.
This is one of the coolest things i’ve seen. Thank you for this video!!
I've been amazed by what you accomplish in this channel. Wheter with a team or by yourself, it is amazing to see how one's effort combined with the wide amount of information can lead to something that would require a whole research group. Congrats!
this is super cool, I've used these tools to design transducer biosensors but we referred to them as plasma deposition sputtering machines. Applying atomic coatings of gold in specific ways. Really incredible to see electron microscopy of it though!
Man the visualizations are amazing! so cool! Production values going through the roof.
The cross sections and animations were amazing! Great work, really helped tell the story of what was going on.
We used to have an ion mill for making 3d models of geologic samples for oil and gas reservoir characterization. Basically it would mill down a layer of material, do a scan with the microprobe, then rinse and repeat. Stacking all the scanned layers together got you a pretty decent 3d model of the sample.
I had a summer internship working with one of these Gatan PECS system. I used it as a polishing system for EBSD samples. I was using it at very low currents. It kind of works once you get the recipe right for your material system. Thanks for the video!
Where was this channel all my life!!!!!!? I felt transported for a minute. Thank you for this amazing content!
Would love to see some detailed videos of the problems and fixes used to get it up and running.
Yeah in retrospect I should have filmed some of that. Was just deep in debugging mode and didn't think about it. A lot of the issues ended up being related to the vacuum gauge (it was _really_ dirty and needed cleaning). The reported vacuum level would sometimes fluctuate wildly, which would confuse the machine and think the airlock mechanism had triggered. That had all kinds of effects like turning off the HV supply, messing with the turbo, actuating the airlock vent, etc.
The rough vac pump needs a new diaphragm, so I just replaced it with my other pump for now. Some of the needle valves needed cleaning, and the ion guns needed cleaning too (they get really finicky once material starts to build up, especially insulators). And I think the bearings in my turbo are dieing, but that's a problem for a different day :)
@@BreakingTaps I totally get that filming everything while you're trying to think and troubleshoot is probably kinda annoying. However, I would definitely have loved to see some more "behind the scenes", even if it's just filmed with a lower quality camera (which could perhaps make it less of a nuisance for you).
--- rambling continues ---
While the results are really cool to see, I'm almost more interested in the process. For example, I have a Pirani gauge that's behaving kinda weirdly, and was considering trying to clean/fix it, although I'm not sure if that's even possible - most sources just seem to say that you should be real careful with them, and that's about it (i.e. probably impossible to fix/clean). I'm guessing the vacuum gauge you're referring to is a different one since you go down to ⁓10e-5 Torr, so it probably wouldn't have mattered, but it's just an example of the kind of small things that can be really useful to some people. Sadly that level of detail probably doesn't attract quite as many views, though.
This video was incredibly well done and brilliantly articulated. I’m not an expert in any of what is being discussed but, I at no point felt overwhelmed by the information being discussed.
8:45 you never fail to rickroll us in a microscopic level
Amazing video as always! Haha at 4:44 two particles orbit each other :D
Wow, this is insanely cool! (Fantastic vid as always too, the animations were great!)
I hadn’t been aware of ion milling before, nano-polishing optics for final figure correction seems like it would be an orders-of-magnitude improvement over conventional mechanical polishing.
I toured a Panasonic lens factory a number of years ago, and saw them hand polishing(!) the tungsten-alloy molds used to make aspheric lenses. The aspheric profile of the mold is formed with a single-point diamond on an ultra-precision lathe. These are quite accurate, but the problem is the diamond tool leaves behind a nanometers-deep spiral groove that can result in ugly “onion-ring” bokeh in the molded lenses. (Bokeh is the term for how out-of-fossil objects are rendered by a lens. Onion ring bokeh makes the big soft background blobs from out of focus background lights in a scene literally look like slices of onions, it’s very ugly and distracting.)
They fixed this by *hand polishing* the molds. A worker would wrap a cloth impregnated with ultra -fine diamond abrasive around their fingertip and very gently rub the surface of the tungsten blank to polish away the grooves. They had a high resolution surface profilometer that they used to check their work, taking many passes on different parts of the blank to both remove the grooves and maintain the aspheric profile. It was incredible that they could do this manually to a precision of 10s of nanometers, and at the time it was a trade secret of Panasonic’s. A couple of years later it became standard industry practice.
This seems like a perfect application of Ion Milling, I wonder if that’s how it’s done now? The next time I am talking to a Panasonic optical engineer I will ask him.
A quick question: What’s the schmutz on the unmilled surface of the diamond on the left side of the frame at about 10:44 in the video? Is that just surface dirt or is the diamond itself that irregular due to poor polishing?
What a great toy! (It a,so strikes me as an incredibly cheap way to get a high-vacuum system driven by a turbo pump 👍😁)
For the rough area at 10:44, at the far left of the frame that’s what random carbon gunk (think oils, random grime) typically looks like in an SEM image. Much closer the etch interface, there may be some roughening due to redeposition of sputtered atoms, or may be roughening in a region which received a low flux of ions near the edge of the main beam.
@@MrPatrick1207 Great, thanks for the explanation!
Fascinating process - thank you for sharing! 🤩 those photos of the etched microchip are extremely cool looking!
The info is awesome, the ion mill is neat, but the animations are incredible! They make the subject matter so much more understandable.
Thanks for all you do!
Thanks! Been teaching myself Blender lately, glad the animations helped convey the information better!
@@BreakingTapsI’ve been ‘teaching myself’ Blender for a while. My stuff is not like this. Salute!
You have two main knobs to control etch rate in different materials:
* Incident Angle: Metals etch faster with a normal, or head-on angle. Polyimide or photoresist etch fastest at about 60°.
* Relative Mass: Matching the mass of your ion to the material to be etched can change the selectivity. For example, choosing a high mass noble gas could increase the etch rate on your tungsten while decreasing the rate on aluminum.
I have to compliment your atom-on-atom model of the interaction during etch, it was beautiful. One thing though: regardless of incident angle the ejected atoms tend to leave normal to the surface, with a population distribution that falls off with the cosine of the angle away from normal. There is a small population tail opposite the incident angle of the beam though. This is because the momentum is transferred into the surface and the subsurface atoms reflect it back to the surface.
makes sense if you think of it, like a captive poolball, there's really only one way for the ball/atom to go, and the remaining energy is dissipated through the structure as heat.
Such an awesome channel... The stuff you bring to us is awesome. Thanks for doing this.
The fact that you were able to diagnose this and get it working correctly is probably just as cool as the machine itself.
That is an insanely cool machine. Can’t wait to see what you do with it in the future
DIB operator for 11 years here. We use the FIB for TEM microscopy. Thanks for bringing what I do for a job to light!
I really enjoy working on black boxes. A couple years ago I got a helium leak detector from the late 70/early 80's working, and now I am working on a home project to get a HPLC from 1997 up and running. The ion mill sounds like a lot of fun.
Love these videos. Really straightforward explanations about cutting edge technologies.
Dude, you're pulling out great content. Keep it up!
Ferris! 🦀
🦀🦀🦀
Always interesting. Thanks for the content.
A+ clear informative script writing, my respect for that.
This is what I wish more people were doing as their hobby. So much potential!
lemme just grab some ion mill on some nearby hobby store
I just etched my first diamonds! Time to pick up some more argon canisters 🎉
Even as an Electrical Engineer (currently doing my master's degree) specializing in Semiconductors I'm very impressed by your abilities and the accuracy of the presented content. Nice job and fun to watch!
*ONE small* thing to add:
Diamond etching/polishing has worked in your case because the diamond particles you bought were not of a high grade purity and crystalline uniformity. In the latter case it would take way, way longer before you could see any noticeable result. To speed it up, you might need a much more powerful/plentiful ion guns.
You keep making me want new fancy toys that in reality I have no use for but like how could I not want something as cool as an ion mill?
The cutaway animation is top shelf editing! Strong work!
It's incredible how those etched microchips looked like alien city-scapes. I could imagine some kind Giger-esque figures coming and going along the "streets" or in and out of the "buildings". Honestly, I could watch those close up pictures/videos for hours.
Excellent video; thank you. I would love to see the repair process, specifically the Turbo and Roughing pumps and how you sourced spare parts etc. Many thanks, Mark.
You should never ever attempt to run a turbomolecular pump in air. These devices are designed for removing most of the remaining particles in a fine vacuum to achieve an (ultra) high vacuum and turn at ultra high RPMs. Running them in air (or any other relatively dense gas) will easily overwhelm the mechanism and crash the whole thing.
Also, Argon molecules don’t exist - as a noble gas, Argon exists only as single atoms ;).
But don’t get me wrong, this was a great and very informative video!
man, you really blow minds every time i watch you! how is this even possible?
damn damn damn, thanks for sharing
Wow this is insane!! Ive never seen a more beautiful cross section of a chip before!
Another fascinating video, great work!
Subscribed! You’re content is amazingly wonderful
i'm always amazed at how you manage to make learning fun!
I used to work in a lab where we prepared samples of films used inside batteries with ion beam etching. For this we made super high aspect ratio cross sections of that film, up to 200:1 so they could be studied in an transmission SEM. A nice trick was that the etching could also be done inside the SEM, which is great news, because it was near impossible to take the samples out of the SEM without them blowing away at the lightest breeze because they were so tiny.
Oh wow, that's a huge aspect ratio!
Such a good channel, you really should have way more subscribers.
You are always teaching me new things. Awesome.. thank you.
Amazing technology. Great work getting the etching machine working again
Ha, I made so many samples using this Gatan Ion miller in the grad school. Good old days. Very innovative design. Used to clean those guns every 2-3 days.
amazing that you got those chips, it really allows to really demonstrate
I was prepared to watch a video with a bunch of cuts of any material and what I got was a guy talking about cutting and then some 100 microscope zooms onto some random stuff that I didnt care about at all.
Keep up the good work 🙂
Great video. I love all of the content on MEMS fabrication related techniques. Is that a Rust Ferris shirt?
Yep, it is! 🦀
You are a good explainer-recently stumbled onto your site-the tool path under the electron microscope is fascinating-a must watch for folks who work with…stuff lol-thanks…
Humanity has created such amazing tools. Not just this ion mill but also the microchips we tend to take for granted. Precision engineering doesn't begin to describe these marvels. It's incredible that we all carry them around in our pockets.
Great video and congratulations on the animations!
Your updated title/thumbnail is much better. With the old one I even thought about not clicking on the video.
Rad, thanks for the feedback! Title/thumb combos always feels like reading tea leaves, hard to know what's working and what isn't because data is delayed. Can't wait until YT lets us just A/B test them
this man has tools and knowledge i didnt think would be possible to find outside labs, wow, amazing video
I just stumbled upon this, and your other video of the microscopic metal spheres on the conductive tape of micro electronics.
2 absolutely amazing videos. Keep up the excellent work.
Okay, I'm sorry, I gotta go, i'm searching through the next one of your videos to watch!
This is frickin amazing. I've always been fascinated with the insane level of precision that people can achieve. Also, why did you take off that poor cats ear.
Love this stuff. Thanks for doing these videos!
What model brand of electron microscope do you use?
This is awesome. Isn’t this very similar to the ion thrusters used in satellites for station keeping?
Yep! They are optimized slightly differently (i.e. no need for a focused beam on a spacecraft) but fundamentally same idea! This particular gun is a very close cousin to the very common hall effect thrusters used on a lot of satellites.
I (and two other engineers) built a two axis ion milling machine in 1995 for computer controlled figuring of optics for semiconductor production. I did the software and process development for both metrology and figuring. Some optical glasses are very heat sensitive, so it was necessary to limit beam energy. Also, maintaining a constant ion beam shape and current over many hours was quite challenging.
Oh wow, super cool! Yeah I can imagine making the process reliable and repeatible is really challenging. My machine is very fiddly and easy to go from a beam that is over-etching to one that extinguishes itself. I can't imagine the engineering needed to make the system work reliably.
Really neat project, especially in the 90's!
@@BreakingTaps You've got to maintain a good vacuum with no contaminants. Filament burns out quickly otherwise. I used a 4 variable partial factorial experimental design to get the 2 electrode currents and 2 argon flow rates to optimize the stability and gaussian shape of the beam. There were trade-offs between maximum removal rate and shape/stability. The latter is more important. The better the beam matches the model, the faster the part will converge to the desired shape. Oh yeah, pitch polished glass has different surface layer characteristics for a few 10's of nanometers than the underlying bulk material. So the removal rate on the first run of a pitch polished surface tended to be low. So you needed to be careful as the removal rate often increased after the surface layer was removed. Even so, removal rate was hard to predict, and had to be measured in process on each workpiece. We needed to hit surface shape uncertainty around 2 nm rms.
Glad to have that knowledge in my arsenal! Didn't knew this existed. But glad i do now, this has so much potential for so many possible applications!
very interesting, thank you for sharing this 👍
and well done for the work put into sharing this, quality content!
Next level rick rolling, now invisible to the naked eye !
You know the rules, and so do ion.
I would really love an in-depth proper look at the machine and its internals!
What hardware/software are you using for the electron microscope? How does it zoom in like that. Is it moving and re photographing/scanning the sample every time you zoom in? Or is it just one super high res image that loads different parts after you zoom in on them?
You have such cool tools and skills!
I am equally - or more - interested in a video about how you fixed all the issues it had. How did you get the turbo pump running?
TBH I'm still not entirely sure what was wrong with the turbo. A lot of issues cleared up once I cleaned the vacuum gauge... I suspect it was giving erratic readings and really confusing the simple state machine that runs the machine. Occasionally the pressure gauge would swing wildly, and then the airlock mechanism would actuate which would cause an actual pressure change, etc. So I'm thinking the turbo might have been instructed to turn off because it thought the machine was in a bad state or something.
I think it was also overheating a little, since the cooling fan had some bad bearings. Once those were fixed it seemed happier too.
Wow. Great project and presentation!
“It’s actually a pretty simple, straightforward device” as he proceeds to fire up 10 flux capacitors 😆👍
Excellent video. I used to work on a lot of semiconductor etching machines though and you are never supposed to run the turbo at atmosphere. Not sure about with that unit but it should always be when the chamber is pumped down with the rough pump
Cool technique man! Are the ion guns basically the same as ion thrusters? Would be cool to know how much thrust they produce.
Basically yeah! Ion thrusters are designed a little differently (no need for a focused beam for example) but it's essentially the same idea. I believe the gun type in this machine is an "end hall anode layer source" which is relatively similar to the common hall effect thrusters on spacecraft.
Agreed, would be neat to know how much thrust they generate! Unsure how I'd test them though
You have the coolest toys! Also, I didn’t know chips used tungsten vias. That’s wild! I imagine there’s all sorts of wild things you could make with this when combined with some of the other tech you have access to.
The tungsten micro-masks remind me of the sandstone pillars (hoodoos) in the American southwest. A tall pillar of soft rock capped by a hard stone, molded by the rain.
As always, top of the top content, and 4K images as always terrific. Thank you very much for so grate content, and we all see only shiny part of the coin and in the back groun performed tremedous work.
Excellent 3D simulations to help us visualise better. You must have watched every BlenderGuru video! 😂
And love the different machines you spotlight, that I'd otherwise have no idea existed. Always super interesting 👍
Those scratches at around 9:30 can be avoided with good mechanical polishing practices, it does not need ion milling... Struers OP-S colloidal silica with the appropriate polishing cloth (MD-Nap or MD-chem) can easily give you the desired results.
Ion milling, or more precisely, focused ion beam (FIB) milling can also give more. For example, you can dig out small lamellae for TEM investigations. I used to make them, they were typically 10x20 um large and approximately 100 nm thin at the end of the procedure. The thinning was also done by the FIB, it was a very gentle (and time-consuming) polishing. Also, it is a great method to increase the "resolution" for element analysis (EDS/WDS) in materials. One can dig a cross-section of interest with the FIB, then can dig a trench a few micrometres behind the cross-section. This effectively decreases the volume where the X-ray photons come from, thus the analysis will be less "noisy". Oh, yes, the FIB I used was using gallium for milling and then I could also use it for deposition, but then it was either carbon or tungsten.
I worked at Intersil, they primarily used acid to etch the wafers, but they did have ion and a Yag lazer
If you put the sample at a very shallow angle to the beam, you can do very fine polishing to reveal crystal sturctures, nano-porous features, etc. Pretty cool technology!
Potentially a very powerful particle weapon
Amazing t-shirt! 🦀
🦀🦀🦀
Looking forward towards that RIE video.
Are you going to use the same machine for RIE, or a different one?
i dont say this often enough. but your channel is one in a million. thanks for the content. may the algorythm bless you :)
combine that with crt, at nano level, you have both nano horizontal and vertical milling-etch accuracy. metal copper heat conduction base plate.
you could also use a soft electron/ion beam to cure an etch mask, so you dont destroy your main high precision etch mask with the electrons/ions, you know the spin sludge on the silicon wafers, then remove any uncured parts of the temporary cured mask, then do the actual hard electron/ion etching, ie to keep the original mask intact, to support multiple copies of the same pattern reliably. industrial processes rock. not sketchy at all.
Some of the really fancy machines have active cooling too. Water cooled copper blocks, or even liquid nitrogen circulation loops.
Another great video, if you don't mind I've a question, is this the same process that is used in the fabrication of EUV mirrors, in order to achieve low surface-rms?
To be honest, I'm not sure if ion beam figuring was used specifically on the EUV mirrors. But I have seen it used to correct other high precision x-ray mirrors so I wouldn't be surprised if they got used on the EUV stuff too!
@@BreakingTaps Thanks for the reply.
3:56 I love that accidental twin star orbit animation 😅
very well explained! cool stuff
That's just absolutely mind blowing
This is one of those concepts you might come up with independently in your college years, and then get stoked when you find out it's already a thing.
Amazing, as always
Did u try organic materials, like nails or skin?
Nope, although I might (lots of questions about it). Should work about the same, but will be a lot messier. The moisture will boil out first and cause a lot of damage to the sample, then the heat will probably carberuize the sample and turn it into hunk of carbon, which will then slowly etch.
Neat machine. Now I want one. Tho' watching you run the TM pump open to full atmosphere did give me a slight case of the woogies...