1995 Nissan Altima 2.4L Stalling & no start
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- Waveform file video:
• 1995 Nissan Altima 2.4...
Waveform file:
fkh161.ca/VW/Waveform/1995Niss...
Snap-On ShopStream Connect Software:
www1.snapon.com/diagnostics/u...
Background image of Steve Rob:
/ @steverobreviews
Thomas
P.O. Box 83041
4827 Kingsway
Burnaby, BC
V5H 0A4
Canada
EXOVCDS Swag: 1060461.spreadshirt.ca/
Rate, Comment, Share, Subscribe, Let the Ads play... I'm still paying off my tools!! Tool or Coffee & Donut Donations welcome at my website below!!
fkh161.ca/
Check out my Picture on on Instagram:
/ exovcds - ยานยนต์และพาหนะ
thanks for the video with the vantage pro thomas. as i was saying yesterday on the live chat i just picked one up cheap. its my first scope so im still trying to get the hang of everything it can do. anyways thanks again buddy. love the vids
Download the file so you can play with it on the vantage... as well as on the ShopStream Connect software!
Yesterday was fun... looking forward to the next chat!
Nice diag there Thomas. I was chuckling as Steve Rob was appearing behind you!
He's everywhere!
great video mate I use the snap on verus but like you still use my really old outdated scan tools and they still work
Great job Thomas and don't worry about the inversion inside the tool as you always do a terrific job :)
Brain farts... it happens. =)
Good video Thomas ! I was worried about Steve sneaking up behind u 😊
He was gonna strangle me!
22 years old Nissan. Lots of backups , I like it. Haha the background was awesome , don't have a clue how you do it or figure out the distributor signals. LOL Thanks Thomas.
Sure you do! =)
Nice video and some great advice
+jimthecarguy Thanks for dropping in!
Here I am again. I was just headed to bed and your videos popped up. I have to see what's going on. I enjoyed the video. I bought an old Vantage after hearing Eric say it was the best meter he's ever had.
I've had mine for over 10 years now I think... great tool!
Awesome. I'm still learning the Vantage so I think I'll be keeping it a long time.
I don't play with it as much as I should (you can tell from the video), since we mainly see regular maintenance at the shop.
Was you able to help Eric? If it's none of my business I understand.
I'm waiting for skype contact.
greetings from Poland, you are my mentor mechanics cars vw
+rafus1200 Thank you... but I'm not very good compared to other guys.
Nice fix Thomas
Thank you.
Good video
Thank you!
Don't change your leads if the current ramp is upside down just flip the clamp over :D
oh yeah and snap-on scanners work 50% of the time every time :) get use to it...
I usually flip the clamp... but I think I was in the driver seat at that time already and decided to invert. Not sure why, because in the past (when in the same situation, I swap the leads instead of walking back to the clamp.
Your up late Eric. Thomas does great videos. I feel like I should buy a VW just to follow along. :)
he's waiting for my project car to be finished then he'll make me an offer I can't refuse :)
I can turn injectors and all sorts off with idiag launch via obd1 plug for Nissan Toyota launch is good
Yeah... I was thinking about Launch as well. I think it would have worked if I had gone to the Nissan diagnostic plug rather than the OBD port.
Hey Thomas, nice to see you're human hahaha! Btw, do you know of any good place to get wiring diagrams for Audi?
The Dealer Repair info website or one of the Shop Repair websites (Mitchell or Alldata I think both have a consumer subscription option).
Audi is $35US for 24hr access
erwin.audiusa.com/erwin/showHome.do
What year / model what wiring do you need? I'm starting work right now, but can get back to you once I get home tonight.
Thomas EXOVCDS I was looking for the wiring diagram for the alarm/siren to a 2003 Audi A4 Quattro 1.8t. Thank you sir!!!
I can not guarantee that I looke-up the correct wiring diagram(s).
The first one is a generic Mitchell diagram, first page is for cabrio (ignore).
fkh161.ca/Audi/A4/AudiA4Alarm001.pdf
fkh161.ca/Audi/A4/AudiA4Alarm002.pdf
Thomas EXOVCDS Thank you!! This is what I was looking for.
Interesting. I wonder if my old Sentra Se-R worked the same way.
Wiring diagram might tell you.
Oh, I sold that a long time ago. Back then, all I wanted to do was race and wasn't as interested in working on them as I am now that I'm too old to race them! lol
One can never be too old to have fun!
Disappointing how much problems we've had with our Verus Pro. Just got it back from Snap On with a new mother board and HD. Great tool when it's working but very pricey and way too many problems, not to mention a slow XP OS.
I had a Verus Pro and I was happy with it... traded up for the Verus Edge because of the SSD. Also no problems so far. As with anything Microsoft, it's hit & miss.
After the car would stall, when you try and restart it would it try to start but sometimes sound like it was binding up or spin the engine slightly backwards? I'm chasing a really bizarre issue on my 98... It starts fine when cold. Once warmed up it will eventually stall. I can usually coax it into restarting but only after several tries. It sounds like it actually back spins the engine sometimes ...
Right before I acquired the vehicle someone put a super China distributor on it (from Amazon) so I'm suspicious of it but the car was free so I don't want to throw parts at it. No codes are showing up.
Incorrect / jumping ignition timing can cause the engine to kick-back when cranking... if things are ok when cold, but get bad when hot, then it could be the distributor that is acting-up / starting to fail.
I think that's exactly what was happening. The distributor on it is some chinesium special that the previous owner installed (well, I installed it for him). I actually opened it up last night to investigate. The plastic cover over the optical wheel looked out of place. I pushed it back, put everything back together and now its running completely fine. ...But it's also 20 degrees cooler outside than it was previously, so that could also be affecting my result. :/
Time will tell... but yeah, anything that can interfere with the optics, is gonna cause a stumble.
1995, same age as me! And perhaps the modis ultra didn't communicate because the car is OBD1 not 2 since its pre 1996? Just popped into my head but I can't remember if you've used the modis on an OBD1 vehicle before..
It probably would have worked if I had tried the Nissan diagnostic port rather than the OBD port. I'll give it a go next time the car is here. It can communicate with my 89 BMW... guess I was in a hurry and didn't want to swap cords on the modis.
Thomas EXOVCDS ahh.. makes sense. I wasn't aware it worked with your BMW. Sounds like a cool car btw.. awesome that you still have your 89. I'd love to see more pictures or video of it someday!
Michael Shone I'm working on making a video about it.
sucks that the fancy snapon scanner wouldn't connect. ive had a scanner that wouldn't connect to most cars but then worked whenever it wanted to...I still cant see myself getting rid of the junk lol
It probably would have worked if I had tried the Nissan diagnostic port rather than the OBD port. I'll give it a go next time the car is here.
Hello Thomas
Hey Richard.
22 years old car wow
My BMW is 28. =)
Thomas EXOVCDS wow long time
Thomas EXOVCDS thought you would drive a VW or Audi.
Jesse Silva I had a Rabbit back in '91. =)
Hey is that your future father in law on the green screen behind you?
Daddy Steve!! LOL
@Thomas EXOVCDS se me quebró el arnés de del distribuidor justo el q reemplasaste pero no se el orden de los cables me podrías ayudar en eso por favor son 4 cables negro, amarillo, azul y naranja
¿Cuál es el año, marca, modelo y tamaño del motor?
@@EXOVCDS es modelo 97 motor 2.4
@@armandopj1 El conector / enchufe debe tener números. Haz coincidir el color con el número. Aquí está el diagrama de cableado. Abajo a la derecha del diagrama.
fkh161.ca/Asian/97AltimaECM.pdf
@@EXOVCDS muchas gracias!!! Haré eso y a ver q resulta.
@@armandopj1 Avísame si lo haces funcionar
necesito ayuda para una Nissan Altima GXE modelo 93 la bobina saca chispas pero las chispas ya no le llegan alas bujías,ya cambié rotor y tapadera de distribuidora y sigue igual
¿El motor tiene una correa de distribución? ¿Está bien el cinturón?
Thomas EXOVCDS echeme la mano para dar con el problemita ya que aquí donde estoy no hay electromecánico,la bobina manda las chispas al distribuidor,pero ya no llega ala bujía
Publica un video en tu canal de TH-cam. ¿Funciona la bomba de combustible?
Thomas EXOVCDS la bomba si funciona
¿El distribuidor gira cuando el motor gira? ¿Es correcto el tiempo del árbol de levas y el cigüeñal?