ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
how to "fix" squeaky suspension (FOR FREE) on your BMW E90 E91 E92 E93
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2024
- Use a silicone based grease/spray instead of the WD40 :)
Of course the more legitimate way to solve this issue is to replace the bushings, how ever my car does not behave like the bushings are bad. And this "fix" seem to hold for a surprisingly long period of time.
Super helpful! My 320i had a creaky rear arm and this method solved it. Used WD40 Lithium Grease and Gasket Silicone Glue. Garage quoted me £218 to replace an entire arm and this was technically free. Ideal!
Great video, but wd40 is not used for such things because WD40 is not the best solution for lubrication, plus it can corrode the rubber in bushing, it is better to use some silicone grease in a spray, (for example Wurth Ultra 2040) which will lubricate the bushing much better, and will not corrode the rubber.
Wd40 it's a brand...that also makes silicone spray, not just the normal wd40 that it's more of degreaser and it's quite the opposite of the purpose of this video.
I do agree, never use WD-40 on any rubbers it will destroy it!
@@xedasxedas Youre actually wrong here silicone is not a degreaser! Its purpose is still to grease and it works on rubber, metal and almost all surfaces! The good thing about the silicone is that it is water resistant and therefore will help keeping it greased. This isue comes from driving into floodwater therefore it helps to keep the water out. Therefore silicone if perfect for this problem. So marko is right
@@Dan-xk8qgcan you use copper grease spray?
Thank you! This worked for me on my 2013 3 series F30.
My mechanic couldn't find the issue, but your video helped me fix it
I used 3-in-one silicone lubricant as I think it is safer on the rubber and I used silicone gasket sealant adhesive to seal the hole which seemed to work nicely (I thought it would be more flexible than superglue).
Thanks again! The noise was driving me crazy!
Great find man! I've been chasing that squeak for over a year now and you just fixed it my friend. Many, many thanks for sharing this! X5 V8
I love this sooo much, I used silicone as recommended in the comments and its done the trick perfectly.
I can't tell you how much it was driving me nuts! Thank you - love this type of video super helpful.
Any specific one you used ? Can you name it please
Thanks 😊
Shout out to you homie 🙌🏻 I’ve been chasing this noise for about 3 months on and off spraying everything and ending up thinking the noise was coming from the bushing around the rear end area. Gave this a Hail Mary and it’s silent again 🙌🏻🙌🏻
Used “blaster silicone lubricant” though (for bushings)
absolute gem of a video - couldn't for the life of me find this noise until i came across your video going to be doing this later tonight - excellent info
how did it work out dude? planning on trying it this weekend?
Great video, fixed my squeak and now I know what to replace when it comes to it! Thanks a lot for the useful info
Funket perfekt med litiumfett på min 2010 E91👏 Bra tips å bruke multimeter til å stikke hull 😄
Jaguar X-type 2.5 V6......just done this on my jag after weeks of squeaking. I was at my witts end and was ready for ordering both upper and lower control arms as I couldn't find where the noise was coming from. Copied the video and popped a hole in both sides of the lower control arm inner mount and the squeaking stopped instantly. I used WD40 specialist silicone spray ..... Will post again with updates so you guys know how long this hack can last for. Thanks mate, great video *****
Still Good?
Worked like a charm . Thanks for the video. It help me temperary fix . Thanks.
Tack, verkar funka bra👌 BMW 320 2014 18000 km
Göttans! 😎
Thank you for this video! It helped me fix my ‘07 318i squeaky noises. You’re a legend sir!
Add after the gasket sealer on the hole and you use red grease for ball joints
Great video I will try it on my e93 same sound thankyou for sharing it
Thanks for this! It's a hard noise to locate because it's difficult to replicate the noise with the wheel off and your head is in there. At the very least, when It comes back, I'll know which bushing I have to replace.
Worked perfekt! Squeaky noise is all gone
Jag älskar dig 😂❤
Köpte precis en 325i med ett sådant hemskt ljud.
Tack vare din video har jag nu konstaterat vilka lagringar(bussningar) som jag så småningom skall byta. Tillfälligt är de smorda enligt tillvägagångssättet i din video.
I have never watched a repair video that made me put my hand over my mouth like a horror movie. When the can of WD40 came out I was like, HELL NO!
😂
Great explanation! I'll try it in my vehicle (2013 bmw x1 xdrive) soon. Hopefully it works. Thank you so much!
Worked smooth on 320i with sillicone. Would recommend needle if you don't want or cant lift it up. 👍
I hope it lasts 🤣
I think it will last longer than one would except!
Yes I think it’s better to go with the silicon spray :)
Damn bro you’re the best. I’m gonna try this hopefully it works. I have the same exact noise on my Hyundai sonata. I have sprayed a whole can of wd40 in the suspension area and it’s still squeaking like a bih. Hoping this works. The noise has been driving me crazy.
So did it work out?
Yes it did. That annoying squeak is gone.
Tack så jättemycket 👍Bra Video 😎
I'm about to try this on my e90, thank you! At 4:49 you can see the left side of bushing swell when you squirt into the right side, interesting. Liking video because helpful and "wink wink" 😂
Hehe glad it was helpful, yeah exactly the rubber on the sides are only dust seals/boots :)
@@mackanistheshit Thanks for the update
Worked on E36 1996 , thank you, but i used syringe and needle to pierce the rubber and filled it with motor oil, i think that is more durable then WD-40... Cheers!
Smart, they say full synthetic 5w30 does wonders!
Tahnk you so so so much. My car f10 noise is same and but not aloud. And only apear noise at left side absorber. I rey to this. Thank you again.
Tack som fan! Har precis samma ljud och har letat vilken busning det kan va... har frågat alla jag känner och alla säger " smörj alla ". Ska absolut pröva detta imorgon!
Do it!
Men kör med silikonspray i stället :)
@@mackanistheshit jag gjorde precis som du. Funkade klockrent 😅 tack igen 😅
Vidrigt sätt att att fixa missljudet på. Påminde ju om när de injicerar kyckling med vatten. Bra video mackan! Såg ju riktigt proffsigt ut.
Haha ja lite skumt är det!
Tack 👊🏻
Aaah finally the horror is gone. Thanks it worked on my E60
It worked!! Ordering bushings now Thankyou
No problem! Yeah new bushings is the permanent solution!
Worked like a charm. Thanks !
Thanks for the video I’m having the same problem going to try it today
Nice I just bought a E93 and after going on the expressway and trying to break it in to my comfort , started to hear a squeak sound
Could be these bushings! How ever if you plan to keep the car in the long run I would replace the bushings. But this is a neat trick to keep them quiet until you do.
I can update you, that they are still quiet :)
Thank you ! Also helped me to fix that terrible noise 🙂
Sjukt bra video. Rakt på sak som det ska va
Thanks man it’s help me i fix in 5 min👍😃 was noise f*** 2 months and now free fix in 5 min🙈👍
Worked like a dream on a 3 series bmw #legend
I’m glad it worked for you! 😃
Thank you for this bro. Woulda been pretty embarrassing pulling up to work like this
Ha ha, try door dashing up to houses, not good. Got same worse squeak noise on civic, now I got possible quick fix. Just put rear struts on it, then this comes up, the squeak which never had before.
Thanks for the video brother! I’m trying this on my 06 325i 💯👍🏼
No problem, but use a silicone based spray instead! :)
@@mackanistheshit will do! 👍🏼
Its worked! Thanks brother🙏
I have a 2001 Civic with that squeak, we sprayed down there but it came back, but this looks like it would get inside the material better. When its rainy out, the sound goes away, until its dry, then its very obvious going over bumps, and just replaced rear struts, then squeak started. Which seems like they're just screaming for some lubricant, I said to mechanic after the struts isn't there anything to oil down there at least, they act like they haven't a clue about any solutions.
YOU SIR are my savior.Thank you it works.
Glad to help!
still no squeak.
Still no squeak!
Fixed an issue, hopefully for long. I used Silicon spray!
Great! Thank you for the video.
No problem! :)
Mkt bra tips & gratis sånt gillar vi 👌👌🙏
Gratis är gott!
Tackar!
Never use petroleum base on rubbe? Use silicon spray or silicon grease
Worked for me thanks 😀
Thanks !👍
Thank you … very informative..
No problem!
Thank you for that video, is it still quiet?👍
Dziekuje to działa 🥸✌️💪👋
I have a 2008 e88 convertable and its doing the same. Hopefully its the same solution
Great! I am gonna do the same
Thank you sir 👍👍
Would it not be better to fill the bushing with poly urethane? (Window weld) from 3M
Worked for me 👍🏼
I used ATF and a medical syringe, we will see how long it will last.
Thank you
tusen jävla tack!
You are champ.
💪🏻
Is it a big job to replace the bushings ?
Good video
Subscribed
Nice, thanks very much
Thank you! :)
Tank you bro 🙏
Well the f3x series also has the same issue 😅
You need to use WD40 Silicone spray for rubber.😮
Perfect
i get a noise similar but when i use stock wheels 205r17 it doesn't give any noise. but with 225r16 it gives me the noise i don't know why is it?
Hi. Is it the bushing that needs to be replaced or the control arm in order to get rid of that horrible sound? Thanks.
I’ve done this but the noise doesnt come if I do it this way:( I’ve took it 3 garages and they couldn’t find the squeek.
I lubed everything but noise is still there and doesn’t seem to go away
I’ve changed my shock absorber and noise is still there
What could cause this??I have a bmw e90:(
Okay so I’m a novice when it comes to cars I have a 5 series f10 my front passenger squeaks like this when I rock it very loud I inspected it and the coils
Spring is snapped on the bottom would this cause the squeak thanks
Har samma problem på min. Trodde det va stötdämparna som va slut...Ska prova ditt trolleritrick 🙏🏻😅
Ja prova! Kan inte bli sämre :)
Quick fix but breaks the rubber down with WD40… good for finding the dodgy bush.
Mine does this too
What about the WD40 High−performance silicone spray? Does it wark?
I thought WD-40 is petroleum based and will destroy your bushings. Shouldn't you use silicone spray or AT205 reseal?
It probably is :)
How ever it doesn’t matter I think. This will only give you time and courage to actually replace the bushing :)
silicon splay is much better but year works well.
You are right! Should have gone with silicon spray :)
Another mechanic said after it rains the wd40 washed away
Wd40 rots rubber. Hence that's why they brought the silicone one out
My have 316000 klms and never do this noise
How many klms have yours????
I think I prefer bye new bushings
But thanks .
👍👍
Yes! New bushings is a permanent solution! :)
It had 160000kms when this started
280.000 noise just came
Any update on how long it lasted?
nice. how long did it last you before the clunking sound came back?
In my experience it will “last” well over a year :)
Could you spray grease in aswell
About that sqeaky jack ?
its the same issue on 1-series, same bushing, same solution
Hi.how did you find where noise come fro m? You have any specific tool?
Just spray silicone grease on them. Wd40 will eat away at the rubber
Yes, probably a better idea, an even better idea is to replace the whole bushing. How ever this will keep them quiet until you do so. :)
wd40 isn't silicone grease?
Hej, Bra video ! Måste man ta bort hjulet för att komma åt att spraya bussningarna ?
Nej det går att göra utan att demontera hjulet! :)
Not bad, but WD40 is not a lubricant... it is just a solvent... is it some other WD40 product?
This videos is an example of what not to do and what not use , youre never supposed to use petrolium based on rubber , but youtube is free and any idiot can make a video
Thank you! That makes us 2 idiots!
@@mackanistheshit im not the one making a fool with wd40 , ur on ur own
@@ericmadx3063 thank you for your input!
Great help
Dodge Ram frontend will eventually exhibit the same squeak
If it takes off and comes back going to have to change the the control arm roght
Or just press in a new bushing
Replacing this bushing looks quite easy, but would it require a wheel alignment afterwards?
My shitty f31 sounds exactly like this
Yeah, it needs an alignment
@@eduarddragomir6380 yeah I thought so. I bought a needle adapter for my grease gun and filled the bushings with silicone grease instead, hasn't had a single squeak in a year now.
10/10 would recommend to anyone having this issue. Made it on my F31 and my brothers F82
I started earring the exact noise after my dumbs went hella fast over a turn and my rear wheels hit the curb and when bang! haha
Ouch, sounds like it takes more than a spray to fix your noice hehe
Gött funkade på min F34
Fått akkurat samme problem med min f36 15 mod, men skal vel være ganske likt ?
Lär vara en liknande konstruktion ja :)
Please don’t do this. WD 40 has petroleum in it and will eat away at the bushing leaving you with costly repairs if it ever does fail. Just use a non petroleum based grease if you need to grease your fittings.
That is a good point! How ever if your bushings squeak like this, they are already in need of a replacement in my opinion!
But I agree with you!
Hi i get a massive squeak everytime I go over a bump or over a dip seems like it’s coming from passenger rear I have a e92 pre lci 2007
Probably the same bush on your car that’s making this noise! Use some silicone based lube in the same way I did in this video :)
@@mackanistheshit cheers, is it most probably bushes that when your going around an island an there’s weight in the back you can also hear like a squeak brushing kind of sound?
Yes its very likely
Har samma problem på min, vad är det för spray du använder tänkte köpa samma, har bilen börjat knaka igen eller är den fortfarande tyst?
Tjena! Det något så enkelt som WD40. Kan du nästan köpa var som helst :)
Japp fortfarande tyst!