I worked for a company in the early 70's that built the type of beams. We used a shop made jig and wedges and a sledgehammer to bend them and then tack them every 6 inches. They were on a tilt table when final welding with a dual wire sub arc machine using 3/16" wire.
I agree about the ads but I have no control over that. I never used to monetize my videos so there would be no ads. Then TH-cam started putting ads in anyway whether you monetized them or not.
Quite the process there. Thanks for walking us through it.
I worked for a company in the early 70's that built the type of beams. We used a shop made jig and wedges and a sledgehammer to bend them and then tack them every 6 inches. They were on a tilt table when final welding with a dual wire sub arc machine using 3/16" wire.
Great discussion and build!!!!
Good one Ken . I watched it twice & i think you pretty well hit the nail on the head . Cheers 👍
Oooooh I doo like that HBM.
So much reach.
Nice work sorting short run production for this tail stock..
There is indeed a lot of thinking hidden in that part.
Good job a lot more to them than you would think. and to much work and time in them to not work properly 👍👍👍👍
Very interesting project. Is all the bending done cold or is heat applied. What thickness is the web being bent.
I would be very curious as to what kind of system the company was/is using before this. Thanks very much. Regards.
Seems like you should have just turned the tube,and been done with it. Too many ads greedy utube scumbags getting as bad as tv
I agree about the ads but I have no control over that. I never used to monetize my videos so there would be no ads. Then TH-cam started putting ads in anyway whether you monetized them or not.