Hi Everyone , for the home blow dart makers here is a great way to make darts , bicycle spokes and I have found buy using insulin pen needle caps and putting it in a piece of coarse sandpaper and turning it around in circles and checking it every few turns it will fit into the .625 big bore guns great . So if you are a insulin user it's a great use for putting these plastic to use .
I like to 3D print dart cones, but I assume if someone has a 3D printer they would already be doing that. One doesn't really need a file, these shapes are so simple, but here is one. I like to nip them so that I only print a piece of the socket and the flange at first, and thereby reduce the time to arrive at perfect dimensions.
His hands covered how the razor blade tips were attached to the wire..Punching wouldn't attach the tip to the wire sturdy enough to be used as a projectile... Perhaps welding might work...Nice idea though
for anyone ever using a rotary tool, _DO NOT_ operate it with it spinning towards you like this. especially with those fragile cut-off wheels. it won't be a good day for you. it's honestly best if you can secure the tool to a work surface and bring the piece to it, but if you can't or won't then you should at least hold the tool facing away from you. those things shatter if you look at them wrong, and you don't want to be in the path of that shrapnel. not to mention the shavings and debris flying at you.
It is often illegal to hunt with broadheads that are barbed, and usually they have a delta like rear wing. The reasoning on game animals is that if they survive the shot, they should be able to pull the broadhead back out. But in those jurisdictions where broadheads are regulated, it makes sense to meet the rules, though I don't know that they are specified for broadheads on darts, where darts are legal. i don't really see a major reason for barbing broadheads since a sharp broadhead will work form muscle movement or hitting branches, but if it falls out there would be a good passage for flow.
@@HondoTrailside I agree with you. However, I don't hunt with blowguns. In my country the only legal way to hunt is using firearms. This is just for fun. If you read my video intro, I strongly suggest that people first check your local legal regulations and laws.
I use bicycle spokes to make darts from. You can find garbage bicycles everywhere. The cones I get from the bamboo practice darts. But you could easily 3d print them. I also attach a spoke to a stun dart and use that for fishing. Drill a hole in the tip just smaller than the spoke and glue in place.
Would it be possible to take a large fish hook like your standard ( ? ) question mark shaped fish hook and straighten it out to make the dart for the blow dart gun?
You could. Also, you could use just a wire, pound it flat and use rotary tool or file to point and cut the groves and make it in the same shape as the hook. If you have a torch, you could use it and heat the tip and then harden it in oil or water. That way you don't have to attach the hook to the shaft.
Using rotary tool I cut a slot in the wire and simply put the blade inside and pinched two sides of the slot together to squeeze the blade. After (the video doesn't show this part) I added a drop of two part metal epoxy to secure it, although it wasn't necessary. Just like you would attach a homemade broadhead arrow tip to a wooden arrow.
It's silicone cap used for distancing the glass from the frame. For example, if you have a wooden or metal table frame that holds glass plate on top, this is used to distance and protect the glass from direct contact with metal or wood. I bought these at the store, but here's the link I managed to find: ja.aliexpress.com/item/1005002450704713.html?gatewayAdapt=glo2jpn Just check about the diameter of the cap.
It's silicone cap used for distancing the glass from the frame. For example, if you have a wooden or metal table frame that holds glass plate on top, this is used to distance and protect the glass from direct contact with metal or wood.
Your idea is good but not practical, I can't imagine going through all that each time you run out of darts, you show creativity but in real world not needed
It doesn't take too long to make one of these. However, this is all for exercise purposes, as a hobby, so they last for me. It's best to order bulk and have them if you hunt more often.
Man, you made me lough! However, this one is not actually porn music, but in some of my other videos you can find actual music from porn movies. Check out my fishing lures videos, especially those with 3d animated lures, and you'll know what I am talking about. Thanks for the loughs and your comment on my video.
This video is a great eye opener for how he attach the blade onto the wire shaft. And where he found those cones ? I love home made blow guns videos.
I found this very useful to make for myself
Hi Everyone , for the home blow dart makers here is a great way to make darts , bicycle spokes and I have found buy using insulin pen needle caps and putting it in a piece of coarse sandpaper and turning it around in circles and checking it every few turns it will fit into the .625 big bore guns great .
So if you are a insulin user it's a great use for putting these plastic to use .
brilliant :D thx
I like to 3D print dart cones, but I assume if someone has a 3D printer they would already be doing that. One doesn't really need a file, these shapes are so simple, but here is one. I like to nip them so that I only print a piece of the socket and the flange at first, and thereby reduce the time to arrive at perfect dimensions.
great music choice for deadly weapons
His hands covered how the razor blade tips were attached to the wire..Punching wouldn't attach the tip to the wire sturdy enough to be used as a projectile... Perhaps welding might work...Nice idea though
He definitely did something off screan
for anyone ever using a rotary tool, _DO NOT_ operate it with it spinning towards you like this. especially with those fragile cut-off wheels. it won't be a good day for you. it's honestly best if you can secure the tool to a work surface and bring the piece to it, but if you can't or won't then you should at least hold the tool facing away from you. those things shatter if you look at them wrong, and you don't want to be in the path of that shrapnel. not to mention the shavings and debris flying at you.
Thank you for a great comment. I always wear a protection, in this case a plastic face shield.
I would be very appreciative if you left a link where I could buy these silicone caps.
I bought these at the store, but here's the link I managed to find: www.ebay.co.uk/itm/265649685171. Just check about the diameter of the cap.
Cool video! I plan to take your idea with the welding wire and actually heat/ pound the tip out to see how it will work.
Thanx for your comment. If you make a video about that too, please leave the link in a comment here so I can see the improvements you made.
@@DancerLures if i feel there are any improvements to this already amazing idea i will deffinetly share!
Love it been looking for a way to make mini broad heads
It is often illegal to hunt with broadheads that are barbed, and usually they have a delta like rear wing. The reasoning on game animals is that if they survive the shot, they should be able to pull the broadhead back out. But in those jurisdictions where broadheads are regulated, it makes sense to meet the rules, though I don't know that they are specified for broadheads on darts, where darts are legal. i don't really see a major reason for barbing broadheads since a sharp broadhead will work form muscle movement or hitting branches, but if it falls out there would be a good passage for flow.
@@HondoTrailside I agree with you. However, I don't hunt with blowguns. In my country the only legal way to hunt is using firearms. This is just for fun. If you read my video intro, I strongly suggest that people first check your local legal regulations and laws.
I use wire and hammer them to paper thin, I can forge a 2mm wire to 5.5 mm broad blade.
Awesome vid. Good stuff.
I use bicycle spokes to make darts from. You can find garbage bicycles everywhere. The cones I get from the bamboo practice darts. But you could easily 3d print them. I also attach a spoke to a stun dart and use that for fishing. Drill a hole in the tip just smaller than the spoke and glue in place.
What is the name of the tools called , the mini cutter and the tool for sharpening the darts ?
Dremel
Very nice tutorial
Thanks for sharing
Would it be possible to take a large fish hook like your standard ( ? ) question mark shaped fish hook and straighten it out to make the dart for the blow dart gun?
You could. Also, you could use just a wire, pound it flat and use rotary tool or file to point and cut the groves and make it in the same shape as the hook. If you have a torch, you could use it and heat the tip and then harden it in oil or water. That way you don't have to attach the hook to the shaft.
Fish Hooks are Tempered many Break rather than Bend.
Thanks for the vid very helpful
Very crafty
I still don't understand how you attached the blade to the wire...
Using rotary tool I cut a slot in the wire and simply put the blade inside and pinched two sides of the slot together to squeeze the blade. After (the video doesn't show this part) I added a drop of two part metal epoxy to secure it, although it wasn't necessary. Just like you would attach a homemade broadhead arrow tip to a wooden arrow.
@@DancerLures thanks buddy. Great job
Nice. But these can be bought pretty cheaply. Seems like a waste of time
Use old bicycle spokes for the shafts
What is the caps name
It's silicone cap used for distancing the glass from the frame. For example, if you have a wooden or metal table frame that holds glass plate on top, this is used to distance and protect the glass from direct contact with metal or wood. I bought these at the store, but here's the link I managed to find: ja.aliexpress.com/item/1005002450704713.html?gatewayAdapt=glo2jpn Just check about the diameter of the cap.
Oo b Vai opi
What is the cap called of, what glass fittings are for?
It's silicone cap used for distancing the glass from the frame. For example, if you have a wooden or metal table frame that holds glass plate on top, this is used to distance and protect the glass from direct contact with metal or wood.
Your idea is good but not practical, I can't imagine going through all that each time you run out of darts, you show creativity but in real world not needed
It doesn't take too long to make one of these. However, this is all for exercise purposes, as a hobby, so they last for me. It's best to order bulk and have them if you hunt more often.
A lot of places these are illegal to have. So you can't just go and buy them. So this is practical in the real world.
@@DancerLures As an owner of a .625 blowpipe, I know the pleasure that you get from your handcrafted hobby. Waaa Cool.
u can bye then 100 for $20 that took way to long
You can, but the joy of DIY is then lost.
Like the footage but can’t do that porno sounding music lol
Man, you made me lough! However, this one is not actually porn music, but in some of my other videos you can find actual music from porn movies. Check out my fishing lures videos, especially those with 3d animated lures, and you'll know what I am talking about. Thanks for the loughs and your comment on my video.