I've been doing auto body for 40 years as a hobby and have fully restored vehicles. I just want to tell you I really appreciate your channel and style. It's no BS, you just get right into it without a lot hype. The devil is in the details: I like how you kind of show everything, even what some would consider not important. NIce tip on the gun. I just ordered one.
it would be nice if I could find a 1.0 tip for it.....the R100 comes with a 0.8 tip.....no other tips seem to be available for that one......I found a cheap HPLV with a 1.0 that worked for me......the tip size become very apparent when mixing powder and with clear to get the color desired...
After finishing a job at home today with this gun, I had to stop by and say thank you for the recommendation. I'm working in my home garage with a 4cfm compressor and have produced decent results with some cheaper and much more expensive guns than this one, but for the first time, I'm proud of the factory-like finish that I was able to lay down with this gun today with no buffing, sanding or polishing. I have dreaded this part of the jobs I've done so far but now I'm excited to do more. Really impressed with this gun ! Thanks!
Awesome! Hey, I really appreciate you letting me know about your experience with the gun. Helps me to dial in the content for the community. Let me ask you with the 4 cfm compressor did you use the technique of lowering air pressure along with the fluid volume to get your results? If not what we're you gun settings.
One of the best videos you put out by far, sometimes us beginners needs to see the adjustments of the gun, paint mixing procedure, air compressor/regulator setup.
I did my international Scout with that gun, took the top, fenders, doors and windshield cowl off and sprayed them separately, then only had 2 body panels on the truck to do along with the door jambs. worked very well. did it with a 29 gallon 5cfm compressor.
About to do my first car spray job and this video was great. I have been watching spray vids all day and the R500 does seem to be the gun for me. Excellent info.
Im a total noob and out of the 100's of videos ive watched, you have provided the easiest to understand info ive seen. You dont do a bunch of unnecessary talking about random stuff which i really appreciate when im just trying to learn! I also have a small compressor so this gun should be perfect. I was ready to drop 1k on a big boy compressor too. So thanks again!
If you get into it you may want that big compressor, but this is a work around to get your feet wet. I appreciate the kind words and support of the channel!
Hello from Australia. I bought one of these for my first attempt at painting part of my sons car. Watched hours & hours of different channels beforehand, yours Chris is one of the best! Learnt a lot. Thank you.
I've been spraying with this gun for the last two years now. It works wonders. I've made so much money with it. I've bought three more and a touch up gun
i have two of these guns. i also have a 25 gallon Costco compressor. i use the gun for painting kitchen cabinets. it works better than the way more expensive Fuji HVLP. this is some of the best $75 i spent
I've been using budget pps since day one. I also pick up the refill packs at Harbor Freight because it only costs about 10 bucks for enough to do an entire job or a few small jobs. I always use pps for clear because of the screen, but to save $$ I often use a regular cup for base and sometimes primer. Base isn't too bad to clean out.
Yeah the harbor freight may be the same not sure. I believe I got the adapter for this gunat HB. Appreciate the support ! I've watched some of your videos keep it up!
Your right about that. I've always been in the habit of judging how the clear is coming off the gun because for a long time I was painting with a smaller compressor. Wish I had this gun when I was struggling with air pressure. Appreciate the comment and support!
@@GarageNoisei'm not much of a content creator( more of a content watcher) but I am going to try to document some work here and there so I can direct potential customers and they can check out what I do...
I am in the middle of painting My 1968 Camaro ( complete color change using PPG concept single stage ) in my tiny garage with a 30 gallon compressor ive done it once before on my previous car a 1965 mustang fastback. My only gun until a few days ago was a Warwick 881h HVLP. This gun would hardly put out any material because it needs13 cfm. My little compressor couldn't keep up... The amount of wet sanding and polishing ive had to do in the past to get a nice finish is insane. This gun the R500 is almost life changing!! for me 🤣....Iam so excited to spray the rest of my Camaro! I did a test panel yesterday and all I can say is wow. A real spray pattern and material iam just thrilled this gun has come to market for us garage DIY guys its a game changer for me.
There you go, that is a great testimonial on this paint gun from real world experience! Although I have plenty of air with my compressor. I have painted plenty with an air guzzling paint gun and a small compressor. I was excited to share this to help out all the diy guys. Thanks for sharing your experience and supporting the channel!
@@GarageNoise I had never heard of a "LVLP spray gun" until a week ago! I asked the guys at the paint supply shop if they had any guns that took less air than mine and they said not really your better off buying a 60 gallon or bigger compressor but like many other DIYers I can't make that happen in my situation so I started looking on YT and BOOM I found your videos! Thanks you for taking the time to produce them and sharing your knowledge 👍
High pressure low volume guns what we used in the old days at home spraying lacquer based paints. Usually these have the paint tank under the gun not above it these required 7-12 CFM .
Good ole Rongpeng. That model has been around for years. Got one posing as an Astro Evo4014. Great gun back in the days and still today if anyone's still has it. If not, just find a Rongpeng, Sprayit sp-33000, and whatever else. It does atomize well, but way too slow for a whole car unless it's really compact.
I've used lots of guns. From Profesional to harbour fraight $20 guns. Really the biggest issue is cleaning them. Make sure it's clean inside. Better guns are easier to clean and made better obviously. Good video explaining everything. Cheap guns can be a pain to clean if you don't have a gun cleaner lol
Thank you! I'd been looking at spray guns for too long already. I'm a beginner & didn't want to spend a lot to practice & learn. Bought this gun using your affiliate link! Awesome!
You talked me into the Aeropro R500. Thanks. I tried the el'cheapo Harbor Freight $15 gun and had to stop after my first coat. I just couldn't adjust my mixture to get a decent finish. So I'll do my next coat with the R500, after I do a little sanding
Ive been holding off from trying to spray my car for fear of not having a big compressor and those expensive guns, seeing this i think i can give a go and have an amazing result, im gonna purchase through link most definately. Thank you for tips on air pressure thats gona be very helpful for me on my 1st attempt .
I bought an Iwata touch up gun, suction type, with bowl, 3.5 cfm, and painted cars with it, I bought it a long time ago, very expensive, then when I had more air, I put a kit in it, to make it a high quality full size gun, 7.5 cfm, and painted many cars and my steel yacht with it. I thought it was a Meiji, which was the other expensive quality choice, but I just took a look at it.
I own one of those guns and for the money you can't beat the results of the finish, on spraying you just to go super slow to get a great finish. I don't spray a lot with this gun because I have so many to paint with but for small or jobs that you're in no rush this is the gun that will save you finish time but over all I think it's about the same time wise because of how slow you go to color and clear what ever you're spring, I believe I purchased this gun from summit racing, and for the money it's a jim of a buy !
Global Autobody supplies in Canada has some wonderfully priced LVLP guns!! Been spraying this gun for 2 years on a 30 gallon compressor for woodworking.
I've had that gun for about 2 years now. I use it with a 27 gallon compressor. It is great for spraying base coats. It's good for clear too, if you calibrate it JUST RIGHT.
Italco mini shine 1.2mm lvmp/ hvlp, around $55-60 here. Its a mini gun, but the hvlp version spray around 22-24cm fan almost like a full size gun. The lvmp model spray smaller fan but still usable and consume less air. I only have the hvlp version, but some user say they only use 1hp airless compressor with the 1mm nozzle and it works well. Italco is a premium brand of auarita. I got several gun with this brand, most auarita model only suitable as a hobby level gun. Its more durable than many chinese brand gun.
You mentioned the significant overspray when shooting clear with the Aiwata gun. I appreciate that you said that as I have that gun and the first time I shot clear with it in my garage that was a very significant issue. I don't use the gun anymore just for that reason. It is a very good gun though as the end result is great, both color and clear.
For sure, If someone is spraying in a booth it's not an issue but without one ventilation is a problem. This gun make a significant difference. I appreciate you commenting and supporting the channel!
Your gun has an extension piece from the gun body to the cup if I go with that disposable cup system from spray IQ will the cups still fit it’s pretty tight without that piece
I know, I have it as well. I bought the spray it R500. What I was saying is it looks. Like the Iwata, w400, the cap and nozzle fit it. That all I was saying. First best gun I bought. Thanks for your feedback.
My set up is a mini HpLv with duel in lines filters. And a harbor freight ulta quiet compressor, it has no problem keeping up air. And they are not expensive. I can't believe I'm promoting them lol. I'm a hater🤣 but everything works well I paid $35 for the gun a decades ago. About 200 for the compressor. I like this guy's info. And I'm going to check out this lphv gun.
"Pete's Hobbies" performed some side by side testing of various gun's CFM usages. The R500 came out at near 8 CFM, and not the 3.7 claimed CFM. I'm still going to get one because videos like yours provide so much information on the R500. (and I haven't sprayed a car since 1990). Wanted to provide this FYI incase gun is acting up while using a 5.5 CFM compressor.
Yeah, I don't feel like it's a sub 5 cfm gun. I can say it is the lowest air consumption compared to other guns I've owned and used. I feel like it's between 7-10 still very low
This is just what I’ve been looking for, I’m not a painter but I want to paint my motorcycle myself but didn’t want to pay hundreds of dollars on a gun that I probably will only use one or two times, thanks for the video
HI, got me one of these guns not used just yet looking forward to using it the model I got is the A610 which is the same as the one you're using only rebranded - great video thanks
Awesome! If I can answer any questions let me know. You can also send me pictures of your project at my email garagenoise247@gmail.com I'd be interested in checking it out. Appreciate the comment and support!
@@GarageNoise I have been using the Roberlo ME1 primer that Coops sells. I have been using a HF purple gun drilled out to the specs I have found on other videos, I can't recall at the moment... 5.3 maybe... anyway, will this gun spray the thicker primer? I have two 20 gallon compressors hooked together to supply more air.
Nice tutorial. What is the size of the compressor ideal for this gun? I need to buy a budget compressor. Can you also give details about the CFM and PSI?
I’m in Tulsa as well I watch your videos all the time ! I didn’t know you were based here , I just bought the r500 and earlier I also bought some paint for my truck from coops, pretty sure his son went to collision and refinishing school with me . Small world !
That's awsome! Appreciate the support! Let me know how you like the R500. I'm doing a video on the Aeropro A610 this sunday it's a updated version of the R500. Appreciate the comment brother!
I just bought this gun (first gun) and a 2hp 20g Ingersoll Rand 5.4 cfm, I’ll let you guys know the results. I bought the compressor used for $400, gun for $54 on Temu. I’m painting my Silverado Metallic silver.
I'd mentioned to you in another video that my R500 came with a damaged air cap. But, since I didn't use it until after the return date, I now have a paper weight. Moral: Inspect on arrival.
the upol primer works well as a sealer also, I am glad you are telling people about that, the 2892 is also good clear, I like that it is system 20 meaning its uses the same activator, edit, upol says the primer can be tinted,I have never done it though, it would be interesting to try
Yes, somthing I neglected to mention is the activator is interchangeable. I would like to try tinting that sealer as well. Appreciate the comment and thanks for the support!
@@GarageNoise no, I did not know that, I used to mix acrylic enamel years ago, I dont remember anything different in it but maybe some clear other than toner,I use the same reducer and activator for sealer as I do basecoat,so no, that doesnt add up to me, Ill try it anyway on a test panel
EXCELLENT, EXCELLENT, EXCELLENT video! i learned about 3 things i did not know from your video. I have been painting for 20 years ....Keep it up , I subscribed and will view often...Awesome dude!
I’m so glad I found your channel. Just subscribed and went through a few videos. I’m looking to repaint one of my cars at home. Going to pick up this LVLP up but wanted to see if you could advise if a Kobalt 26gal that’s 4.5 cfm at 90psi would be okay or do I need something that’s even bigger? Thanks again, appreciate all your videos!
It would probably get the job done, I like to see at least 6cfm. I always say buy as much cfm as you can afford. Harbor freight makes one 30 gallon close to 6cfm for under 300 I believe. Hope this helps appreciate the sub and support! Welcome to the community!
Hi! Absolutely loved the video with the very thorough explanation of the garage setup with all the tricks to get around using a booth and with all the tips and techniques explanation. Saved the video, thank you so much! I got a question. Most probably a stupid one. I got a 4.8 gallons compressor with 2.2CFM@90PSI. I know, I know, it's not "small" but rather "tiny" in the car paint world. But the question is, is it even possible to paint a small car (a Mazda Miata NB) with an R500 type of the paint gun and this compressor with some struggle for a newbie, or it's a 100% one way ticket to a failure? Thanks!
I appreciate the comment and support. Unfortunately I don't think that compressor is going to get the job done. You need about 6cfms, typically that's about a20-30 gallon compressor.
All thhe song we think say na old songs and hymns still dey valid in the prescence of the lord. Lord loves thanksgiving heart❤,. "okan olope ni emi yio mu sanra ni oluwa awon omo ogun wi"
Love the video, thanks. I want to start spraying my cabinets that I custom make with a paint gun and need a set up. I am thinking about purchasing this gun. Any budget recommendations on an air compressor that would do the job?? I have a 2 CFM HF air compressor that I have used with a hopper/gun for wall texturing but I am doubtful I would get good results with lacquer? Any info is appreciated. Thanks!
Awesome video. Just one question. At the end although the paint looked fantastic and smooth I could see quite a few specs in the paint. Was this dust caught in the clear or was it caused by the gun ?
I am taking automotive painting and color matching at my local university campus up the street. I don't have a ton of money to spend on equipment, and I have a completely different purpose for taking the classes. I restore Ovation guitars, and I want to be able to paint the bowls (composite fiberglass bodies) and tops. The paint job and explanation were great, with one caveat. I didn't hear you specify what CFM would be required of the compressor. Obviously, what I will be painting isn't even a tenth of the square inches of that bumper cover, so I am wondering what I need. I have been looking at 20-30 gallon tanks with a 5hp motor on the compressor. They typically put out between 8-10 CFM @ 40psi. By your description, I am guessing that would be adequate. Thanks for the video, explanation, and recommendation on the gun!
This is an awesome video! What are the supplies you used called? Like the pump you had for the big one that you used to clean your gun? And what what that thing you used to flush out the gun?
Note to everyone, this gun and the inoteck D 1 Drizzle are the exact same. Anything you need such as every size needle nozzle and cap set, replacement parts, seal's etc are only available through aeropro for A610/R500 but work on both
Hey man, I appreciate all your videos! I love how I don’t see anyone else “giving their secrets away” like you do. Have you gotten ahold of Speedokote stuff yet!! Their clear is hard to beat for their price!
Thanks, this was great news as I am researching a setup that will spray kitchen cabinets and refinish panels on my car. I wonder what the minimum size compressor is recommended. I have a 5 gal. but I don't think it will cut it.
Great video, thanks for sharing your knowledge, and hello from across the pond. Would this gun be suitable for home use spraying woodwork with water based acrylic and also oil based finishes? Thanks.
I use mostly the inexpensive ones. I have had them fail on me and that can be frustrating because you then have to determine why your guns not holding pressure. Sagola make a great one, small and reliable. it's about $50.00 tho.
Another great video. I'm not a painter but want to learn. Got some cars I'm restoring. Is the reducer you used just standard urethane reducer. Again I really enjoy watching you show and share your knowledge.
Thank's brother! Yes, just standard urethane reducer. Good luck on your restoration hope the content is helpful in your project. Appreciate the support!
Great video! I have been researching guns for a while and just pulled the trigger and ordered one from your Amazon link. Now, how do I get the cup you use rather than the one that comes with the gun? Thank you.
Hey man. I really appreciate that and I appreciate the comment and the support. I will leave a link for the disposable cups that I use. You can go with the segola, disposable cups or the ones in this video, they're spray IQ.amzn.to/3whOmK1 amzn.to/3Uo6EkH
Great video and great information but i have a question , would this gun be suitable for spraying a satin black 2 pac , will be respraying my car soon and going with a satin 2pac so I won't be clearing over it
I've been doing auto body for 40 years as a hobby and have fully restored vehicles. I just want to tell you I really appreciate your channel and style. It's no BS, you just get right into it without a lot hype. The devil is in the details: I like how you kind of show everything, even what some would consider not important. NIce tip on the gun. I just ordered one.
Thank's brother really appreciate the kind words and support. Good to know what you as a viewer like about the channel helps me make better content.👍
it would be nice if I could find a 1.0 tip for it.....the R100 comes with a 0.8 tip.....no other tips seem to be available for that one......I found a cheap HPLV with a 1.0 that worked for me......the tip size become very apparent when mixing powder and with clear to get the color desired...
After finishing a job at home today with this gun, I had to stop by and say thank you for the recommendation. I'm working in my home garage with a 4cfm compressor and have produced decent results with some cheaper and much more expensive guns than this one, but for the first time, I'm proud of the factory-like finish that I was able to lay down with this gun today with no buffing, sanding or polishing. I have dreaded this part of the jobs I've done so far but now I'm excited to do more. Really impressed with this gun ! Thanks!
Awesome! Hey, I really appreciate you letting me know about your experience with the gun. Helps me to dial in the content for the community. Let me ask you with the 4 cfm compressor did you use the technique of lowering air pressure along with the fluid volume to get your results? If not what we're you gun settings.
What is the minimum size to tank you would recommend for this sprayer@@GarageNoise
One of the best videos you put out by far, sometimes us beginners needs to see the adjustments of the gun, paint mixing procedure, air compressor/regulator setup.
Oh good! Thank's for the input, I did it a little differently and wasn't sure how it would be recieved. Appreciate the comment and support!
@@GarageNoise What size hose would you recommend I use for this spray gun??
@@chrisplayz9739 I always use a 3/8 hose. It works well. Appreciate the comment and support!
@@GarageNoise thank you for your help, i have a 20 gallon husky compressor with 4 scfm at 90 psi and im gonna try to learn to paint with the r500
@@chrisplayz9739no way i have the same compressor.. how did it go?
I did my international Scout with that gun, took the top, fenders, doors and windshield cowl off and sprayed them separately, then only had 2 body panels on the truck to do along with the door jambs. worked very well. did it with a 29 gallon 5cfm compressor.
About to do my first car spray job and this video was great. I have been watching spray vids all day and the R500 does seem to be the gun for me. Excellent info.
You can't go wrong with this gun.
Im a total noob and out of the 100's of videos ive watched, you have provided the easiest to understand info ive seen. You dont do a bunch of unnecessary talking about random stuff which i really appreciate when im just trying to learn! I also have a small compressor so this gun should be perfect. I was ready to drop 1k on a big boy compressor too. So thanks again!
If you get into it you may want that big compressor, but this is a work around to get your feet wet. I appreciate the kind words and support of the channel!
Hello from Australia. I bought one of these for my first attempt at painting part of my sons car. Watched hours & hours of different channels beforehand, yours Chris is one of the best! Learnt a lot. Thank you.
Awesome! Appreciate the comment and support!
I've been spraying with this gun for the last two years now. It works wonders. I've made so much money with it. I've bought three more and a touch up gun
Awesome! I've got a couple high end Devilbiss, a sagola and and I prefer to use this $70.00 gun🤣
I have the R500 . Love it. New compressor ,5.1scfm. I’m ready to start practicing!
Awesome Robert!
i have two of these guns. i also have a 25 gallon Costco compressor. i use the gun for painting kitchen cabinets. it works better than the way more expensive Fuji HVLP. this is some of the best $75 i spent
Thank's for sharing your experience. Appreciate the support
I've been using budget pps since day one. I also pick up the refill packs at Harbor Freight because it only costs about 10 bucks for enough to do an entire job or a few small jobs. I always use pps for clear because of the screen, but to save $$ I often use a regular cup for base and sometimes primer. Base isn't too bad to clean out.
That's a really nice finish, the big overlaps really help and yeah, this gun is pretty slow so you gotta keep that thought as you spray
Yeah the harbor freight may be the same not sure. I believe I got the adapter for this gunat HB. Appreciate the support ! I've watched some of your videos keep it up!
Your right about that. I've always been in the habit of judging how the clear is coming off the gun because for a long time I was painting with a smaller compressor. Wish I had this gun when I was struggling with air pressure. Appreciate the comment and support!
@@GarageNoisei'm not much of a content creator( more of a content watcher) but I am going to try to document some work here and there so I can direct potential customers and they can check out what I do...
@@BearBudgetgarage Do you use 24L or 50L air compressor when you use lvhp spray gun??
I am in the middle of painting My 1968 Camaro ( complete color change using PPG concept single stage ) in my tiny garage with a 30 gallon compressor ive done it once before on my previous car a 1965 mustang fastback. My only gun until a few days ago was a Warwick 881h HVLP. This gun would hardly put out any material because it needs13 cfm. My little compressor couldn't keep up... The amount of wet sanding and polishing ive had to do in the past to get a nice finish is insane.
This gun the R500 is almost life changing!! for me 🤣....Iam so excited to spray the rest of my Camaro! I did a test panel yesterday and all I can say is wow. A real spray pattern and material iam just thrilled this gun has come to market for us garage DIY guys its a game changer for me.
There you go, that is a great testimonial on this paint gun from real world experience! Although I have plenty of air with my compressor. I have painted plenty with an air guzzling paint gun and a small compressor. I was excited to share this to help out all the diy guys. Thanks for sharing your experience and supporting the channel!
@@GarageNoise I had never heard of a "LVLP spray gun" until a week ago! I asked the guys at the paint supply shop if they had any guns that took less air than mine and they said not really your better off buying a 60 gallon or bigger compressor but like many other DIYers I can't make that happen in my situation so I started looking on YT and BOOM I found your videos! Thanks you for taking the time to produce them and sharing your knowledge 👍
Really appreciate the advice for the diy’er. Some of us can’t afford to pay a pro but still want pro results.
High pressure low volume guns what we used in the old days at home spraying lacquer based paints. Usually these have the paint tank under the gun not above it these required 7-12 CFM .
God figuring out the right compressor/gun combo for my first garage job has been hard to figure out. This is helpful.
Good ole Rongpeng. That model has been around for years. Got one posing as an Astro Evo4014. Great gun back in the days and still today if anyone's still has it. If not, just find a Rongpeng, Sprayit sp-33000, and whatever else. It does atomize well, but way too slow for a whole car unless it's really compact.
Rongpeng that's the manufacturer good to know. It's been rebranded all over the place. Thank's for sharing!
I've used lots of guns. From Profesional to harbour fraight $20 guns. Really the biggest issue is cleaning them. Make sure it's clean inside. Better guns are easier to clean and made better obviously. Good video explaining everything. Cheap guns can be a pain to clean if you don't have a gun cleaner lol
👊
Thank you! I'd been looking at spray guns for too long already. I'm a beginner & didn't want to spend a lot to practice & learn. Bought this gun using your affiliate link! Awesome!
I appreciate that, I think you'll dig it. Really the perfect first diy gun. Thank's for supporting the channel!
You talked me into the Aeropro R500. Thanks. I tried the el'cheapo Harbor Freight $15 gun and had to stop after my first coat. I just couldn't adjust my mixture to get a decent finish.
So I'll do my next coat with the R500, after I do a little sanding
👊
I bought a R500 at your recommendation and loved it painting my drivers door on my Silverado. I like it more because it is a slower gun. Thanks Chris.
Awesome!
Ive been holding off from trying to spray my car for fear of not having a big compressor and those expensive guns, seeing this i think i can give a go and have an amazing result, im gonna purchase through link most definately. Thank you for tips on air pressure thats gona be very helpful for me on my 1st attempt .
Awesome! You can do it! Appreciate the comment and support!
Absolutely a perfect gun for refinishing guitars.
I bet
What’s the minimum size air compressor I need for painting bumpers / wings please?
I just purchased this gun, and I'm excited to try it
👍
I bought an Iwata touch up gun, suction type, with bowl, 3.5 cfm, and painted cars with it, I bought it a long time ago, very expensive, then when I had more air, I put a kit in it, to make it a high quality full size gun, 7.5 cfm, and painted many cars and my steel yacht with it. I thought it was a Meiji, which was the other expensive quality choice, but I just took a look at it.
Wow that's a nice fan and the clear flowed real nice.
Appreciate the comment and support!
Chris you are killing me. I have so many spray guns and you made me order one of these to try out. Lol
Ha ha, at least it's only 60 bucks lol!
@@GarageNoise a lot cheaper than both DV1s i bought. 😄 🤣
would you recommend a 1/4 size hose or bigger for these little spray guns?
tell ya I bought a harbour freight chrome gun for 68.00 a few years ago.i wouldn't trade it for any high end gun. good video.
👍
Not bad at all!! I just got this and i cant wait to spray with it , i will do a review on it , seems really great for the price
Thank you, I purchased this gun from your recommendation.
Thank's Steve! Appreciate the comment and support!
I own one of those guns and for the money you can't beat the results of the finish, on spraying you just to go super slow to get a great finish. I don't spray a lot with this gun because I have so many to paint with but for small or jobs that you're in no rush this is the gun that will save you finish time but over all I think it's about the same time wise because of how slow you go to color and clear what ever you're spring, I believe I purchased this gun from summit racing, and for the money it's a jim of a buy !
Appreciate you sharing you experience with the gun. Thank's for the support my friend!
Global Autobody supplies in Canada has some wonderfully priced LVLP guns!!
Been spraying this gun for 2 years on a 30 gallon compressor for woodworking.
I've had that gun for about 2 years now. I use it with a 27 gallon compressor. It is great for spraying base coats. It's good for clear too, if you calibrate it JUST RIGHT.
👍
Novice here. Looks great!! Thank you for all the great info!!
Awesome! Appreciate the comment and support brother!
Italco mini shine 1.2mm lvmp/ hvlp, around $55-60 here. Its a mini gun, but the hvlp version spray around 22-24cm fan almost like a full size gun. The lvmp model spray smaller fan but still usable and consume less air. I only have the hvlp version, but some user say they only use 1hp airless compressor with the 1mm nozzle and it works well.
Italco is a premium brand of auarita. I got several gun with this brand, most auarita model only suitable as a hobby level gun. Its more durable than many chinese brand gun.
I have shot partial
And completes job
With this gun and old
Model 3m gun...
By the way old 3m gun
Excellant value...
Thank's for sharing your experience. I haven't used the accuspray in awhile but that gun is a good value and versatile. Appreciate the support!
You mentioned the significant overspray when shooting clear with the Aiwata gun. I appreciate that you said that as I have that gun and the first time I shot clear with it in my garage that was a very significant issue. I don't use the gun anymore just for that reason. It is a very good gun though as the end result is great, both color and clear.
For sure, If someone is spraying in a booth it's not an issue but without one ventilation is a problem. This gun make a significant difference. I appreciate you commenting and supporting the channel!
@@GarageNoise I thought you had a lot of overspray of clearcoat with this gun.
I love that Gun I’ve had it for years it’s anodized red I bought it from wood repair products in orange, ca
Thank's for sharing brother, appreciate the comment and support!
Your gun has an extension piece from the gun body to the cup if I go with that disposable cup system from spray IQ will the cups still fit it’s pretty tight without that piece
Best gun I've ever used. Best clear gun
Appreciate the comment and support!
The budget Iwata, love this gun. Use more than my Iwata.
Love the budget Iwata as well. This is the R500
I know, I have it as well. I bought the spray it R500. What I was saying is it looks. Like the Iwata, w400, the cap and nozzle fit it. That all I was saying. First best gun I bought. Thanks for your feedback.
I have the Eastwood version and it works great for me.
Thank's for sharing your experience, appreciate the comment!
The performance of the gun & the user was awesome...... Thanks for sharing your knowledge.
Thank's appreciate the comment and support!
Hi its beatiful work full of Good reasons for drive my jeep to your Shop from P. R. ❤ YOU ARE THE BEST
Thank's brother!
My set up is a mini HpLv with duel in lines filters. And a harbor freight ulta quiet compressor, it has no problem keeping up air. And they are not expensive. I can't believe I'm promoting them lol. I'm a hater🤣 but everything works well I paid $35 for the gun a decades ago. About 200 for the compressor. I like this guy's info. And I'm going to check out this lphv gun.
👍
"Pete's Hobbies" performed some side by side testing of various gun's CFM usages. The R500 came out at near 8 CFM, and not the 3.7 claimed CFM. I'm still going to get one because videos like yours provide so much information on the R500. (and I haven't sprayed a car since 1990). Wanted to provide this FYI incase gun is acting up while using a 5.5 CFM compressor.
Yeah, I don't feel like it's a sub 5 cfm gun. I can say it is the lowest air consumption compared to other guns I've owned and used. I feel like it's between 7-10 still very low
I've never seen a better finish in auto paint. Gonna get one next month if they don't cut my VA check again!! Thank You, JD
Good job Chris. I like the idea you are showing us DIYers how to use the R500. I bought one and really like it.
Awsome! I will be switching it up at some point
looks like a great option for low volume compressors
Definitely!
This is just what I’ve been looking for, I’m not a painter but I want to paint my motorcycle myself but didn’t want to pay hundreds of dollars on a gun that I probably will only use one or two times, thanks for the video
👍
HI, got me one of these guns not used just yet looking forward to using it the model I got is the A610 which is the same as the one you're using only rebranded - great video thanks
Awesome! That's a great gun. Appreciate the comment and support!
This is exactly the kind of accessible video I need for an upcoming first ever spray job. Gonna check out your other videos! 👍
Awesome! Thank you!
The coloring reminds me of the Black Widow HVLP from Harbor Freight.
👍
Hey! I am also in Tulsa. I am doing my 1st paint job on my 54 Belair.
Awesome! If I can answer any questions let me know. You can also send me pictures of your project at my email garagenoise247@gmail.com I'd be interested in checking it out. Appreciate the comment and support!
@@GarageNoise I have been using the Roberlo ME1 primer that Coops sells. I have been using a HF purple gun drilled out to the specs I have found on other videos, I can't recall at the moment... 5.3 maybe... anyway, will this gun spray the thicker primer? I have two 20 gallon compressors hooked together to supply more air.
Nice tutorial. What is the size of the compressor ideal for this gun? I need to buy a budget compressor. Can you also give details about the CFM and PSI?
I’m in Tulsa as well I watch your videos all the time ! I didn’t know you were based here , I just bought the r500 and earlier I also bought some paint for my truck from coops, pretty sure his son went to collision and refinishing school with me . Small world !
That's awsome! Appreciate the support! Let me know how you like the R500. I'm doing a video on the Aeropro A610 this sunday it's a updated version of the R500. Appreciate the comment brother!
Your spray jobs are awesome
Thank's brother!
This video is awesome. Speaking my language
👍
Great video and how awesome your in Tulsa, started your video for basic advise for paint sprayers and we live in the same city.
I just bought this gun (first gun) and a 2hp 20g Ingersoll Rand 5.4 cfm, I’ll let you guys know the results. I bought the compressor used for $400, gun for $54 on Temu. I’m painting my Silverado Metallic silver.
How did your truck come out. Did the gun and compressor work out . Would you do it again?
I'd mentioned to you in another video that my R500 came with a damaged air cap. But, since I didn't use it until after the return date, I now have a paper weight. Moral: Inspect on arrival.
I would say that's a good tip! You never know with these products. Appreciate the comment!
Buy another tip dufus
@@donjohnson7899Well, dufus the company ghosted me. The tips aren't available any place else unless you know different.
@@sealisland1 If you did research, it uses the same internals as the SP-33000 series
That's a beautiful finish for a 60.00 gun.
I use expensive guns and can't tell the difference lol....
I know right, kinda love it because of the low overspray. Appreciate the comment and support!
the upol primer works well as a sealer also, I am glad you are telling people about that, the 2892 is also good clear, I like that it is system 20 meaning its uses the same activator, edit, upol says the primer can be tinted,I have never done it though, it would be interesting to try
Yes, somthing I neglected to mention is the activator is interchangeable. I would like to try tinting that sealer as well. Appreciate the comment and thanks for the support!
@@GarageNoise I am going to try using leftover basecoat first,I think it refers to using mixing tint though
@@yeayeasautoadventures1161 yes, you will need the mixing tint. As you know you can't just add paint to sealer that's a no no.
@@GarageNoise no, I did not know that, I used to mix acrylic enamel years ago, I dont remember anything different in it but maybe some clear other than toner,I use the same reducer and activator for sealer as I do basecoat,so no, that doesnt add up to me, Ill try it anyway on a test panel
EXCELLENT, EXCELLENT, EXCELLENT video! i learned about 3 things i did not know from your video. I have been painting for 20 years ....Keep it up , I subscribed and will view often...Awesome dude!
Awesome to here! Appreciate your comment and support!
Hi Chris 👋 hope your OK and well cracking job there very well explained thanks
Thank's brother! Appreciate your comment and support!
Excellent video, thanks!
You are welcome!
I’m so glad I found your channel. Just subscribed and went through a few videos. I’m looking to repaint one of my cars at home. Going to pick up this LVLP up but wanted to see if you could advise if a Kobalt 26gal that’s 4.5 cfm at 90psi would be okay or do I need something that’s even bigger? Thanks again, appreciate all your videos!
It would probably get the job done, I like to see at least 6cfm. I always say buy as much cfm as you can afford. Harbor freight makes one 30 gallon close to 6cfm for under 300 I believe. Hope this helps appreciate the sub and support! Welcome to the community!
Great finish. I usually use devilbiss guns.
I like Devilbiss have a couple plus guns. Appreciate the support!
I’m going to buy one, thanks too you
Awesome! I think you'll like it.
I just ordered one of these spray guns from a link from one of your previous videos Chris. Can't wait to try it when it gets here!
Awesome appreciate the support. I think you'll dig it, let me know how you like it!
Great video, thank you. Liked and subscribed.
Thanks for the sub and comment!
Binks M1-G not a budget gun but excellent quality. Sprays base coat and clears exceptionally well.
I know Binks have made some good guns. Never used one. Thank's for sharing and supporting the channel!
Mikes from Jamaica great .great job
Thank's buddy! Appreciate the support!
You sold me on this gun!
I don't think you can go wrong. Let me know how you like it.
Great info on this Gun, and work!...............
It looks great I just purchase that gun. thanks to you 👍👍
Awesome! Appreciate the comment and support!
Very nice finish!
Appreciate it! Thank's for the comment!
Thanks a million for the info on this gun. I bought one and it works great.
Great video, i am just getting started and looking for a beginner set up. What is the smallest compressor i could get away with using this spray gun?
20gallon that produces 6cfms.
I'll be in Tulsa July 7&8 for the All Mercury Invitational car show at the Sagnet center. It would be great if you could make it
That would be cool, but I have something going on that week.
When I bought this gun it was labeled as the "Sprayit 3300" I believe, same r500 on the side
Yes, there's several sellers, but the gun is an R500 and it's the same gun
What is considered a small air compressor
Hi! Absolutely loved the video with the very thorough explanation of the garage setup with all the tricks to get around using a booth and with all the tips and techniques explanation. Saved the video, thank you so much!
I got a question. Most probably a stupid one. I got a 4.8 gallons compressor with 2.2CFM@90PSI. I know, I know, it's not "small" but rather "tiny" in the car paint world.
But the question is, is it even possible to paint a small car (a Mazda Miata NB) with an R500 type of the paint gun and this compressor with some struggle for a newbie, or it's a 100% one way ticket to a failure?
Thanks!
I appreciate the comment and support. Unfortunately I don't think that compressor is going to get the job done. You need about 6cfms, typically that's about a20-30 gallon compressor.
@@GarageNoisegot it, thank you!
Great video and a Great job
Thank's brother!
All thhe song we think say na old songs and hymns still dey valid in the prescence of the lord. Lord loves thanksgiving heart❤,. "okan olope ni emi yio mu sanra ni oluwa awon omo ogun wi"
What do you think of the Astro A610 Chris?
Aero pro a610? I love it
Love the video, thanks. I want to start spraying my cabinets that I custom make with a paint gun and need a set up. I am thinking about purchasing this gun. Any budget recommendations on an air compressor that would do the job?? I have a 2 CFM HF air compressor that I have used with a hopper/gun for wall texturing but I am doubtful I would get good results with lacquer? Any info is appreciated. Thanks!
You need about 6 cfm's for this gun in general ,the more the better but at least 6cfms
Awesome video. Just one question. At the end although the paint looked fantastic and smooth I could see quite a few specs in the paint. Was this dust caught in the clear or was it caused by the gun ?
Dust, and it can easily be wet sanded out.
@@GarageNoise thanks for the reply! I guessed dust. Just wanted to be sure before I purchase the gun.
I am taking automotive painting and color matching at my local university campus up the street. I don't have a ton of money to spend on equipment, and I have a completely different purpose for taking the classes. I restore Ovation guitars, and I want to be able to paint the bowls (composite fiberglass bodies) and tops. The paint job and explanation were great, with one caveat. I didn't hear you specify what CFM would be required of the compressor. Obviously, what I will be painting isn't even a tenth of the square inches of that bumper cover, so I am wondering what I need. I have been looking at 20-30 gallon tanks with a 5hp motor on the compressor. They typically put out between 8-10 CFM @ 40psi. By your description, I am guessing that would be adequate. Thanks for the video, explanation, and recommendation on the gun!
For what your doing I believe your right on track with the compressor your thinking of. Appreciate the comment and support brother! Happy painting!
Beautiful 🔥🔥🔥
Thanks 🔥
This is an awesome video! What are the supplies you used called? Like the pump you had for the big one that you used to clean your gun? And what what that thing you used to flush out the gun?
Thank's! Here's the a good squeeze bottle kit
amzn.to/3ZlARD6
Here's a pump sprayer
amzn.to/44ScCOh
@@GarageNoise I’ve become a big fan of yours! Found you on tik tok, thanks for all your advice!! What is the pump you had for the big gallon?
Note to everyone, this gun and the inoteck D 1 Drizzle are the exact same. Anything you need such as every size needle nozzle and cap set, replacement parts, seal's etc are only available through aeropro for A610/R500 but work on both
👍
Hey man, I appreciate all your videos! I love how I don’t see anyone else “giving their secrets away” like you do.
Have you gotten ahold of Speedokote stuff yet!! Their clear is hard to beat for their price!
Thank's brother appreciate that, I have some speedcoat ready to try, will be coming soon.
Thanks, this was great news as I am researching a setup that will spray kitchen cabinets and refinish panels on my car. I wonder what the minimum size compressor is recommended. I have a 5 gal. but I don't think it will cut it.
No, I don't think it will work with a 5 gallon
Great video, thanks for sharing your knowledge, and hello from across the pond. Would this gun be suitable for home use spraying woodwork with water based acrylic and also oil based finishes? Thanks.
I haven't tried it but other viewers have and say it works well.
Really helpful video! Is there any reason to get a really good regulator or can I just use a mid grade/cheaper regulator?
I use mostly the inexpensive ones. I have had them fail on me and that can be frustrating because you then have to determine why your guns not holding pressure. Sagola make a great one, small and reliable. it's about $50.00 tho.
Another great video. I'm not a painter but want to learn. Got some cars I'm restoring. Is the reducer you used just standard urethane reducer. Again I really enjoy watching you show and share your knowledge.
Thank's brother! Yes, just standard urethane reducer. Good luck on your restoration hope the content is helpful in your project. Appreciate the support!
Great video! I have been researching guns for a while and just pulled the trigger and ordered one from your Amazon link.
Now, how do I get the cup you use rather than the one that comes with the gun?
Thank you.
Hey man. I really appreciate that and I appreciate the comment and the support. I will leave a link for the disposable cups that I use. You can go with the segola, disposable cups or the ones in this video, they're spray IQ.amzn.to/3whOmK1
amzn.to/3Uo6EkH
Beautiful Finish, flat as can be, like glass. No orange peel here my friends. With a budget gun.
👍
Great video and great information but i have a question , would this gun be suitable for spraying a satin black 2 pac , will be respraying my car soon and going with a satin 2pac so I won't be clearing over it
Absolutely
Great explanation and thank you for the excellent video instruction!
No problem happy to help. I appreciate the comment and support!