www.williamsmobileclutch.co.uk 🇬🇧 Contact Us For Your Clutch Replacement. There she is brother John ..! Thanks for watching and hope the video comes in handy for all..
Great job Kevin, I don’t comment to often but never miss a video. Pure professional at your job and you can always see whether it’s a quick shuffle of the spanner or a wipe of the tool box each time before you close a draw that you enjoy your work. Keep it up 💪👍
A GOOD JOB DONE WITH INTELLIGENCE THAT IS NOT FOR EVERYONE. AS ALWAYS YOU DEMONSTRATE THAT YOU KNOW HOW TO DO THIS WORK VERY WELL. I ALWAYS SAID THE CALM AND THE VIRTU OF STRONG MEN.
Hi Kevin, Thanks for sharing the video clip. Looked like a big job before you even started removing the gearbox. A privilege to watch you work and how you adapt to your working environment. I'm looking forward to your next clip meanwhile, stay safe and of course keep smiling. 👍 😉
Not only does Kevin knock out massive jobs out in the open in no time at all, unbelievably he manages to undertake fantastic videography all throughout!
Kev. Brilliant video.Great that you are adding more content to them which includes linkage removal and oil top ups etc. That Accord is a well made car, but the extra components that need removed would need a remortgage if done at the dealers. Keep it up and look forward to your next one.
Fantastic job Kevin , amazing skills you demonstrate even the whole thing ALONE .... Hats off to you mate ! In one word : PROFESSIONAL !. Great video . KEEP WALKING !!! All the best from Hungary !
I don't know about the diesels but there are other videos on the tube showing 4 cylinder petrol Accords being done without removing the gearbox from the car or subframe? Remove the drive shafts and gearbox connections in the normal way then undo the intake manifold nuts. Pull it do the side leaving everything connected. This gives access to the starter which can be pulled out slightly still connected. Push the gearbox to the right. This gives just enough access to the clutch. Turn the car over on the crank to gain access to each clutch bolt.
All I Can To You Is Much Admiration On How You Did This On Your Own Is Bloody Amazing, I Take It You Had 3 Weetabix Or More For Breakfast, Amazing Mate. Applause
Just re watched this. Excellent video man, best one on youtube regarding this. I'm confident now and away to the driveway to do my clutch and flywheel. Inspired:)) 👍
Did the job myself on my 2006 accord cdti , at the end i got the check engine light on(p0698), the airbag light on (11-10 open in the driver's airbag first inflator) , horn not working and a drunk speedometer... Just call this guy..
48:40 what part are you securing here? Took mine to the garage and after a MAP/MAF change it's been left unsecured. I hate discussing this stuff over the phone as I rarely have the correct terminology
i am literally at this point 40:33 now my gearbox slides on but it is like 3/4 of an inch off touching the block, i can just see the teeth on the flywheel, did you use the bolts to pull it on the last bit or was it snug when you put the bolts in! cheers great video been a massive help i am too doing off axle stands
Full send bro never lift 😏🤙mobbin deep 🙌 hey bro if you ever do a mitsubishi lancer evolution aka evo x can you make that like it's own detailed video would love too see ty ty g
So Im getting a Accord Tourer 2010 2.2 idtec. I will have to replace the clutch. The clutch needed is a normal one? (cheaper), or its "bimasa" (expensive one)?? Thank you so much!
Anyone please correct me if I'm wrong, but I believe he has already answered that, I had the same question. He said he doesn't because the main two was that seal goes bad to leak is either a: thee car has just sat and the seal dried and cracked which in that case he probably wouldn't be there, or b: an internal engine failure has happened that has caused the seal to leak such as bad bearings to bad crankshaft, etc. He would only do o the seal IF he fixed what caused it to leak, but since he doesn't do internal work like that, no, he doesn't replace the rear main seal. Hopefully this helps.
There are few bits that don't go with the recommendations, that self adjusting clutch is installed using a clutch loading tool, otherwise will prematurely wear, less than 30k miles I would say... But if customers are happy... 😑
Hi. Thanks for contacting us. For a clutch replacement price and availability please click the link below: www.williamsmobileclutch.co.uk I’ll return your message with a break down quotation. Thanks Sally. Admin@: Williams Mobile Clutch Service.
Would you say it was worse working on the Accord compared to the Civic 2.2? Seemed like you had more room in the Accord, but you had to drop the sub-frame in contrast.
Incredible content and camera shots. Which model do you prefer/easiest to work on ? Do you have any preferences ? And in the same way are there models you find annoying to work on ? Cheers
Maverick the trick is to add an extra two layers. I might start with a jumper and a Woolly hat. Then when you take one off at a time you feel that little bit cooler … 😁🍻
Nothing major. Just things like crushed fingers .,, deep cut on the hands. Hitting head hard enough to split, needing stitches. Split eyebrows needing stitches. That sort of stuff that can be patched up. Sometimes heavy bruises. Mostly cosmetics.
Did you get round to getting it done? The clutch on my tourer has just gone and looking for any advice on where to get it done how much to expect etc? Cos this looks a ball ache of a job 😂
www.williamsmobileclutch.co.uk 🇬🇧
Contact Us For Your Clutch Replacement.
There she is brother John ..!
Thanks for watching and hope the video comes in handy for all..
Excellent filming, focus & lighting! Direct method and easy to follow. Bravo!
Great job Kevin, I don’t comment to often but never miss a video. Pure professional at your job and you can always see whether it’s a quick shuffle of the spanner or a wipe of the tool box each time before you close a draw that you enjoy your work. Keep it up 💪👍
Thank you
A GOOD JOB DONE WITH INTELLIGENCE THAT IS NOT FOR EVERYONE. AS ALWAYS YOU DEMONSTRATE THAT YOU KNOW HOW TO DO THIS WORK VERY WELL. I ALWAYS SAID THE CALM AND THE VIRTU OF STRONG MEN.
Thanks for the feedback Luca ..
Hi Kevin, Thanks for sharing the video clip. Looked like a big job before you even started removing the gearbox. A privilege to watch you work and how you adapt to your working environment. I'm looking forward to your next clip meanwhile, stay safe and of course keep smiling. 👍 😉
Thanks Mark .., definitely have to adapt to the heat. Right now I’m starting early morning … always appreciate your feedback
Not only does Kevin knock out massive jobs out in the open in no time at all, unbelievably he manages to undertake fantastic videography all throughout!
This job is so tough, even on a bridge, on jack stands this is pure skill
This model is heavy undercarriage. Work very hard. You are really good.
39’20’’ the bench lift of the casing is tough work.
Kev. Brilliant video.Great that you are adding more content to them which includes linkage removal and oil top ups etc. That Accord is a well made car, but the extra components that need removed would need a remortgage if done at the dealers. Keep it up and look forward to your next one.
There was quite a few bits to come out. So I wouldn’t be surprise of an extended bill from a dealership
Fantastic job Kevin , amazing skills you demonstrate even the whole thing ALONE .... Hats off to you mate ! In one word : PROFESSIONAL !. Great video . KEEP WALKING !!! All the best from Hungary !
Thankyou.
I'd like to thank you for the video, I'm doing it without doubt once I watched it. And your electric wrench is a game changer 😂
I don't know about the diesels but there are other videos on the tube showing 4 cylinder petrol Accords being done without removing the gearbox from the car or subframe?
Remove the drive shafts and gearbox connections in the normal way then undo the intake manifold nuts. Pull it do the side leaving everything connected. This gives access to the starter which can be pulled out slightly still connected.
Push the gearbox to the right. This gives just enough access to the clutch. Turn the car over on the crank to gain access to each clutch bolt.
this clutch was replaced at 190000miles ?
All I Can To You Is Much Admiration On How You Did This On Your Own Is Bloody Amazing,
I Take It You Had 3 Weetabix Or More For Breakfast, Amazing Mate. Applause
Thanks for the feedback. Much appreciated 🍻🍻
I own a 2.2 I- CDTI Accord Estate, looks quite the job to do!
For sure ., a bit of a job that one
Just re watched this. Excellent video man, best one on youtube regarding this. I'm confident now and away to the driveway to do my clutch and flywheel. Inspired:)) 👍
Смотрим на одном дыханий!👍✊👏
Did the job myself on my 2006 accord cdti , at the end i got the check engine light on(p0698), the airbag light on (11-10 open in the driver's airbag first inflator) , horn not working and a drunk speedometer... Just call this guy..
Excellent job and camera angle also 👍
that's a lot of parts to remove to get to the box, big job that kevin and great work. thumbs up from me buddy 👍👍
It was mate .. but once that very heavy subframe was out it wasn’t too bad then
Big strip down that mate, did well there Kev especially without a lift
Thanks mate.
the rust flying around there :D epic job, great video
Heavy subframe tho
A lot of work right there. I wonder why they don't sell an Accord diesel over here? Probably an EPA thing. Nice job.
a good early start to avoid the heat 😉👍
Oh yeh .. I’m trying to get on-site for 06:30-07:00am at the minute
48:40 what part are you securing here? Took mine to the garage and after a MAP/MAF change it's been left unsecured. I hate discussing this stuff over the phone as I rarely have the correct terminology
The air filter box
@@WMCS thank you for the prompt response!
Damn.... Great job 💪
i am literally at this point 40:33 now my gearbox slides on but it is like 3/4 of an inch off touching the block, i can just see the teeth on the flywheel, did you use the bolts to pull it on the last bit or was it snug when you put the bolts in! cheers great video been a massive help i am too doing off axle stands
If you ever give clutch up you could easily be a fitness instructor. I can only imagine the neck muscles and the abs you developed. 😄
Nice Job Mr. Kevin, Have a Nice Day.
Tough one this
a work out this one mate well done as always
Brother you repair the car with clutch replacement
Hey Kevin, I think my accord will need it's clutch replacing next year as well. Same model, how much would it cost? Thanks
My friend William is a clutch specialist
😁🍻🍻
How much all in to do this repair thanks
Just over 1k
@@WMCS a lot off work in it
Full send bro never lift 😏🤙mobbin deep 🙌 hey bro if you ever do a mitsubishi lancer evolution aka evo x can you make that like it's own detailed video would love too see ty ty g
So Im getting a Accord Tourer 2010 2.2 idtec. I will have to replace the clutch. The clutch needed is a normal one? (cheaper), or its "bimasa" (expensive one)?? Thank you so much!
Any answer, please? Its very important for me to know this. Thank you, Master.
@@alexg6374 double mass flywheel, most diesels have double mass flywheel, i got an accord 2.2 too, 2006
Thanks for sharing 👏
Does the crankshaft seal need to be replaced when replacing the clutch?
Anyone please correct me if I'm wrong, but I believe he has already answered that, I had the same question. He said he doesn't because the main two was that seal goes bad to leak is either a: thee car has just sat and the seal dried and cracked which in that case he probably wouldn't be there, or b: an internal engine failure has happened that has caused the seal to leak such as bad bearings to bad crankshaft, etc. He would only do o the seal IF he fixed what caused it to leak, but since he doesn't do internal work like that, no, he doesn't replace the rear main seal. Hopefully this helps.
Top quality job and vidéo !
Thanks..
Kevin, what cameras and tripods do you using to capture the footage?
Do you use any lighting when working underneath?
Just a GoPro and a torch.
Kudos. İncredible Work!!
There are few bits that don't go with the recommendations, that self adjusting clutch is installed using a clutch loading tool, otherwise will prematurely wear, less than 30k miles I would say... But if customers are happy... 😑
super boulot 😉👍🍻
Merci beaucoup
Hi have you done a Vauxhall Antara clutch on your channel please.
What's your average amount of vehicle's for the week that you do?
Hi Kevin ,
I have Honda Accord 2.2 2011
Can you change my clutch and how much.
Thanks Leo
Hi.
Thanks for contacting us.
For a clutch replacement price and availability please click the link below:
www.williamsmobileclutch.co.uk
I’ll return your message with a break down quotation.
Thanks
Sally.
Admin@:
Williams Mobile Clutch Service.
Sir. what does an average clutch restoration cost.. just curious...Lon from Ohio...
So did you fall in love with the Accord after this work?😊
I’ve got another one next week 🍻😁
@@WMCS 😁🥰🍻
Would you say it was worse working on the Accord compared to the Civic 2.2?
Seemed like you had more room in the Accord, but you had to drop the sub-frame in contrast.
I’d say the accord was more intense for sure. Only because of the subframe tho.
Another great video top work
Incredible content and camera shots. Which model do you prefer/easiest to work on ? Do you have any preferences ? And in the same way are there models you find annoying to work on ?
Cheers
My favourite is probably BMW or VAG engines. Just good straightforward engineering.
Worst has to be Mini R50 supercharged.
in real time how long does it take you to do this job
Czekam na accorda 8 cu1 👌✌️
Jesteś mega twardzielem pokazałem twoja robotę chłopakom w pracy każdy w szoku ze sam podjeżdżasz do takiej roboty mega szacun 👌🖐️
Good work
Thank you
what's the impact gun you're using?
Dewalt DCF899
Thanks man no doubt i will be doing this job one day lol
I take it you have one of them bad boy.
@@WMCS yeah its the perfect commuter for me, crazy how cheap you can pick them up for
A lot of work ! for that model .🥵🥵
Yes mate. A little more involved this was
How many years have you been doing this work?
How are you?
I’m good. Thank you.
When you see the video is over an hour long, you just know this job is going to suck😂
Damn.. this one was hard.
Definitely was
@@WMCS Which is the hardest car to work on in terms of access and time?
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
👌👌👌👏👏👏👍👍👍 удачи
Brand new clutch
Nice one 👍
Ciao ,questa Honda è stata dura ma tu sei una roccia ciao
different my country using gassoline.diesel has little.maintanance fuel pump high price.
Eh... clutch replacement is a task that has to be done on my 2004 pre-facelift accord... I don't want to see the bill... :D
coche muy entretenido
Damn.. A few more bolts and the whole engine would come out...Which I have too do on my Grand Caravan, It's easier to just take the whole thing out...
This one is more complicated than the audi black.
🤗🤗🤗.......!!!!
I don't understand why Honda made this so complicated.
Have you prepared your swimsuit for this week? 🥵🥵🍺
Maverick the trick is to add an extra two layers. I might start with a jumper and a Woolly hat.
Then when you take one off at a time you feel that little bit cooler … 😁🍻
@@WMCS it's not really stupid 😂
Have you ever gotten your self hurt while doing this? :)
Nothing major. Just things like crushed fingers .,, deep cut on the hands. Hitting head hard enough to split, needing stitches. Split eyebrows needing stitches.
That sort of stuff that can be patched up.
Sometimes heavy bruises. Mostly cosmetics.
ооо иньересно
c est la merde sa quant il faut enlever le berceau !!!
Not looking forward to doing this on my tourer 🥲
Did you get round to getting it done? The clutch on my tourer has just gone and looking for any advice on where to get it done how much to expect etc? Cos this looks a ball ache of a job 😂