1996-2000 Accord automatic transmission replacement
ฝัง
- เผยแพร่เมื่อ 12 ก.ค. 2020
- How to remove, replace, install, fix your transmission on a Honda Accord. This was an f22 or 2.2 liter single cam engine. It was removed because it had a torque converter seal leak. If you need to do an engine rear main seal, this video might help a little too. 1997 1998 1999 96 97 98 99 00 2.2L.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained. - ยานยนต์และพาหนะ
I wish you did every repair on TH-cam. To the point and showed everything relevant, thank-you!
Thank you, Rust Belt! You are very helpful AND entertaining! Thanks for sharing...!
Good video. The one I'm working on is a 2000. There's a subframe to remove before the trans can come out.
Great video. It goes to the point. Real mechanic. Doesn't not waist any body time. Thanks
Straight to the point with the wrench action sped up accordingly. About to do a Prelude transmission swap in my Accord for the shorter gears - thanks for the how to.
Dang I didn’t know you could do that. Does it bolt right in to the f22b2?
@@RonaldRayguns Yes - H22/H23 transmissions can bolt onto Accord F22 engines no problem. You will gain acceleration, but the engine RPMs will be higher on the highway is the tradeoff.
Very explanatory and instructive video, thanks much 🙏 !
My 2002 Honda Accord needs a transmission luckily it’s not as bad and still drivable but watching this video I refuse to get a car note and I love my car it got me thru some hard times and I only paid $1200 for it even though it’s 20 yrs old it only got 118,000 miles on it and I drove it for 3 yrs with no problems so I owe that car that much to bring it back and man this video was therapeutic asf thanks bro 😎
bruh im right here with you i got a 97 Honda Accord “SE” (special edition with sunroof) sorry had to flex that lol but for $400 was the price for mines & so far i’ve gotten a new engine with 90k miles put in, new catback exhaust, new suspension kit ready to go when i get her back, got 0 cracks in my seats (leather) at the moment she’s getting a newer transmission put in as we speak found a tranny with 80k miles for $300 from a family friend whom we always gotten certain parts from him for the “hook up” & next couple months i plan on lowering her after i get my turbo & NOS setup lol don’t judge me trust me
anyway with that being said my bad i went off topic but do that shit fam it’s 100% worth it im only doing this with her cause i owed it to myself to get a second car & i went in for a 2013 chrysler 300 s with a 5.7L V8 but couldn’t get it with it being first dealer purchase & not trading my honda in so i was blessed enough to leave with a 2014 Charger SE all black on black but im getting raped with that APR 😂 only cause i’m about to be 20 in the next couple days
Hey man, thanks for the detailed walk through. Someone offered me a 97 with dead trans & I was needing to gauge how big of a job it is. Much appreciated! Cheers from Aotearoa!
I did one two months ago on a 2001 Accord. If your fluid is not burned, try to swap 6 solenoids to see if it is your problem. My car works fine now but I wonder if I spent my time for no reason as my fluids were good.
instablaster
Same, except that they gave it to me without a transmission lol.
This video was very helpful bro👊🏽
Grasias amigo you saved me a lot of money very good video long life to you mi friend.
Thanks! Right now, I'm not seeing the upside to the long life thing though. Sometimes I wish I could get it over with a little faster.
I found this video very therapeutic for some odd reason and I’m not even mechanically inclined 😇
Can't say I've ever heard that before. Thanks for watching!
Well DONE!! Thanks Dude!!!!!!!!
Thanks I got answer to my question
best ive seen
Goated video thank you
"The bar thing" is called a "radius rod" and that passenger one is usually bent on these things. causes weeble wobble bad alignment
I'm surprised to see you can get away by removing a half frame linkage bar. I did not now that and I removed the whole half frame.
Awesome job! I have a 1999 I was thinking of putting a transmission in, but I don't have a lift......how many hours did the actual job take?
I don't know.
Thanks for post video
Like the video
Figured someone would watch it :)
Can’t wait till I set up my lift , too bad my ceiling is an average 8 foot ceiling !👍
Older buildings sometimes had reinforced rafters, and raised ceiling joists, or rafter ties.
On, I believe, 97 or 98 models honda went to that 4-point crossmember, which has to come down to get the trans out. Total pain.
Is it 97 or 98 I’m looking into replacing my transmission in my 97 accord and would like too know
Is this the same model almost as a 1998 Honda prelude ? The transmission blew and I’m thinking about buying one and installing it myself
H & F series engine blocks are pretty much the same.
If someone replaced my trans and didn’t put in the dust shield how hard will it be for me to just retrofit one on there, cause rn I can just see the torque converter spin from the bottom of the engine and it makes me uneasy.
Does said someone know where it is? Can you get one from a junk yard?
Are you listening to Austrian Death Machine in the background? Maybe Pantera?
Luv me a MacGyver wrench... I bet you watched that show back in the day. Old Angus loved his Wrangler if I recall...
I think I still have some of that Form-a-gasket junk too.... It smells pretty bad but man, it seals forever, you're right!
Dude man guy, I think I know him...
OKAY BYE!
The second one.
@@RustBeltAuto You need to check out ADM. It's pretty good. First and second album. 3rd isn't so great. Do you have Amazon Prime? I think it's on there music streaming service, free for members.
@@BarnStangz I heard Pearl Jam and temple of the dog in a couple videos, I also heard Cake "the distance". Can't make out the rest.
@@mediaguy4037 Good ear man!
Same air box screw broke and froze on mine too.
I'm having trouble getting the two bolts on the back left on the bracket out, any tips?
C ccccc Cec . . cc ececc ccccCe c cc cccccc c c. C c. C cc. Cc. C. Cec. Ec. E.oCc. E. Ceceve e. E. ccec e eCccccce. C
C ccccc Cec . . cc ececc ccccCe c cc cccccc c c. C c. C cc. Cc. C. Cec. Ec. E.oCc. E. Ceceve e. E. ccec e eCccccce. C
What kind of Jack is that ? And great video man
I have a harbor freight transmission jack, motorcycle lift, and a maxJax.
Good enough for the squirrels I roll with.
Pantera, nice.
Question: Does the flex plate not bolt up the Torque Converter?
All flex plates do.
That's definitely a rust belt car. And holy sht that's a lot of rust
hey rust i have the same cat it makes a noise when it sits at park and neutral it jumps when i move it from park to driver / reverse some guy said it was the torque converter do you think so??
Did he mean he thinks the bolts are loose?
@@RustBeltAuto he said my trans is done but i think i just need to fix the mounts and change the trans oil trans was replaced i think they messed up a bit
You don't seem to use an air ratchet for anything on any video? Also, I recently heard that it helps youtubers if you painfully watch the entire ads. Is that true?
sorry, I didn't mean to post twice.
I use them, and also don't care what you do with ads. It's all micro cents. An average view makes about .007 cents.
@@RustBeltAuto So do you get any money from doing this or is it just for community service? Either way, thanks. I have a huge tube of brown #1 that I think my father bought in 1959. Its still half full. Nasty shit! I didn't even know it was available anymore.
@@nealmont That stuff will never not be available.
@@nealmont I don't get money. Instead I chose to live under a bridge to benefit mankind, and I'm diverse enough to live under a different bridge every day. Thanks for watching!
Does it matter what way I’m turning the harmonic balancer ? And does the serpentine belt need to be on ? I have my belt off and I read in a forum when taking out the trans turn the harmonic balancer counter clock wise some advice would be greatly appreciated im new to this and don’t want to mess anything up .
That engine runs counter clockwise. That is why they say that. The serp belt does not need to be on.
Do you need to take off the torque converter bolts while the transmission is still on the vehicle? or can you do that while the transmission is removed??
@@DeadlySniffles you need to remove them before you take it out.
Well actually, i should have specified more clearly.. My question would be, Do i need to do that process with the dust cover & torque converter, if i want to take out and swap the entire transmission with another complete transmission
@@DeadlySniffles the converter needs to be all the way in the trasmission taking it out, and putting it in.
You don't seem to use an air ratchet for anything on any video?
I do.
Solution pls :- My Honda bulldog 1999 D4 light always start to blink when the gear change to 3 or 4, but if i off the engine and start again it will stop but when it change to 3or 4 gear is start to blink again but my speedometer is not work, i need your advice on how to solve the issue
There will be transmission codes that will lead you in the right direction.
@@RustBeltAuto thanks on the info, i discussed with my mechanic to help checked through code, but he replied saying there is no way to scan the car cox the code plug as be disconnected from the car
@@ifeoluwaomidiranganiyu5552 you have no OBD2 connector under the dash?
My trasmision stared to leak can it be the seal?
It depends.
How do u know it was torque converter fault
I assume u a lot of pb blaster because
It so rust. Like my car. Thanks for saying the size of nut
I took off the cover for the shift cable, and could see it leaking when it was running. I use deep creep. Pb blaster stinks real bad.
How long did it take you to complete?
I didn't keep track.
@@RustBeltAuto on 2001 it took me around 10 hours to swap.
Does anyone know about how to figure out/what to look for when finding a compatible trans for 96 Accord LX with a 2.2 l motor?
Car-part.com?
How much fluid did this end up requiring if you remember
I cannot remember. If it was drained out, I would start with 2.5qts, and check it.
We didn't see it is running.
Like the wind.
@@RustBeltAuto Okidoki
PSA: only use a 6 point box end wrench, and only a box end wrench on the torque converter bolts
Can't even get the air box off....
I luggage so hard literally my exp with my accord
I bet you like working on hondas compare to Subaru
I love Honda's.