Top 5 Problems Ford F-250 6.4 Diesel Truck 2008-2010 2nd Generation

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/196/c/steering-dampers
These are the top 5 problems with the 2008-2010 Ford F-250, specifically the diesel model! In this video, Cristian fills you in on the most common problems facing owners and prospective buyers of the 2nd generation Ford F-250 6.4 diesel, like low fuel pressure, low power, and dangerous unsteady steering! He offers tips on how you can either avoid or solve those problems in your truck!
0:00 Top 5 Problems Ford F-250 6.4 Diesel Truck 2008-2010 2nd Generation
0:20 High Pressure Fuel Pump Wiring
1:00 Intercooler Couplers
2:57 Thermostat Bypass
4:07 EGR Cooler
5:42 Death Wobble - Worn Steering Components
8:12 SUBSCRIBE! | Shop 1AAuto.com Link Below!
This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty
🔧 List of tools used:
• No Tools Needed
Subscribe: / @1aauto
Check out our playlist:
Ford F-250 Super Duty 2nd Generation 2008-2010: • Ford F-250 Super Duty ...
For More Info visit us at 1aau.to/h/eod/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@VendettaFXR]

The EGR cooler on the 6.4 does fail, but not because of a seal.
And we need to understand WHY it fails. Replacing just the oil cooler on the 6.4 is only putting a bandaid on the issue.
You see, the EGR uses coolant to cool off the exhaust gases, but before it reaches the EGR it passes through the OIL COOLER. and if the oil cooler gets clogged with the casting sand from the manufacturing process, it restricts the EGR coolant flow until the welds weaken and ultimately ruptures. So the fix? Replace the oil cooler, do a coolant flush, intsall a coolant filter, THEN replace the EGR.
And the radiatior is not without its faults. The plastic endtanks eventually break and leak. Solution? Get an aftermarket radiator with metal ends.
Theres also the issue with the Piezo electric injectors. Highly sensitive to contaminated fuel.
Head bolts? 4 per cylinder and shared.
DPF and regen process.
Need I say more? Mind you I'm a Ford fan, and I got a 6.0, but I'll stay away from the 6.4, but it sure does look good.
Bear in mind this is engine is a Navistar sourced engine, same as the 7.3, 6.0 and 6.4.
Ford's 6.7 the Scorpion was designed by Ford in house.

[@John-wb2jd]

I have the 6.8 V10. Zero problems with 180k miles.

[@TheMikecanon]

6.4 has a #4 and #7 heat issue that will cause ring burn or fracture, wrist pin keeper loss, injector failure, and injector seal issues. Ask me how I know....

[@focusinc4266]

thanks for this video. my fear level went down a bit on my first Diesel engine [09 F350] purchase.
welllllll I had a 77 MBZ... but different animal 😊

[@finn1355]

Very good thank you. I have been looking for a F250.

[@hughphillips67Mustang]

Why was my oil filter empty when I changed my oil? Can this happening the car sets for a period of time? Or is it a more serious issue?

[@Gofast8954]

6:42 what are those track bars called going UP on the front end ?

[@thebeardedskateboarder]

Why does this channel not make how to videos anymore? That's what made this channel great, not this stuff.

[@drewbush6535]

Too many ads I liked and commented hope it helped.

[@puremayhemFTW]

Where are the how to videos?

[@AngelCruz-or4wd]

Why coolant going to the oil when truck hardly gets driven it’s a 2009 ford F 250 diesel 6.4

[@scottreynolds5455]

My 2008 6.4l Turbo completely died. The key will not even turn on too shift gears. I was just driving after a small radius turn and giving it the gas and then everything dead. Like I said the Key causes no reaction.

[@patriciareynolds2729]

had to put tierod ends & steering box on my 2008 for the wobble. POS.

[@janamaro5894]

And there's another common problem on 08-10 Ford Super Duty with 6.4 Powerstroke, DPF clogged. The amount of emission systems clogging the EGR and DPF it cooks the engine to death. The repair cost too expensive. It wasn't Ford, it was Navistar did this.

[@1AAuto]

+Jan Amaro Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@ricklamanen7555]

Don't forget you'll get the Famous Ford Engine Tick after 20,000 miles 😆😂

[@irishuwould5185]

The best way to not have issues with these are to buy a Chevy

[@jessejames2849]

If it’s too much of a problem don’t buy them.

[@tjpowerponch5740]

"TESLA" TRUCKS..WE NEED THAT BADLY...NO SENSORS..NO DIESEL NO GASOLINE...NO MORE WASTE MONEY TO THE TOILETH