Only 8 Days Left Until C10 Nationals - Do We Stand A Chance?
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2024
- We are getting close to wrapping up the 1968 GMC for @c10nationals 2024 in Texas. We have less than a week to finish things up and give it a test and tune. I sure hope we make it!
#c10trucknerd #c10nationals #itsthechad
Precision Weather Strip Seal - amzn.to/3UJfkDQ
Deluxe Side Markers - amzn.to/4a9Au2p
Standard Side Markers - amzn.to/3WrSSjI
Wiper Blades - amzn.to/4bnECwS
Wiper Arm Removal Tool - amzn.to/3xxDNjV
VHT Paint - amzn.to/4cX9xkZ
Phosphoric Acid - amzn.to/3PLnJ6D
67-72 Factory Assembly Manual - amzn.to/3nKvLih
How to Restore your Chevy Truck - amzn.to/3nKOdHI
Check out all my 67-72 videos here:
• 1967-72 C10 Trucks
To Follow and See What I'm Up To:
/ itsthechad71
/ itsthechad71
Keyword research tool for TH-cam (TubeBuddy) - www.tubebuddy.com/ItsTheChad
//My Gear Used:
My Camera -amzn.to/3FMHcML
My Tripod - amzn.to/3gLfeKO
My Microphone - amzn.to/485QAtY
My Lighting - amzn.to/34Y4aDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting ItsTheChad! - แนวปฏิบัติและการใช้ชีวิต
![[TH]FFWS SEA Spring 2024 Point Rush - Day 1](http://i.ytimg.com/vi/_LI5pXZFYhw/mqdefault.jpg)
I`m glad you left your truck three on the tree!
I makes it stand out and much harder to steal!!
I’ll be dipped!!! I love that guy!
So good!
Good honest work guys the way things usually go.
We sure have had fun with this one! A couple guys who figure it out as you go! Thanks for tagging along with the channel!
It's almost something! I've always wanted to go to the C10 Nationals. Maybe next year!
Something is right! I would add Nationals to your bucket list! I think you have your hands full with a few projects this year!
Thanks that would be very helpful if you have one to do sometime. You and your cuz have a good trip! Look forward to seeing a post of your trip on here!
Will do! We'll have some fun footage for sure!
Man, I still am amazed how much I like the green engine block! Seriously cool! Truck is looking great, but seeing you struggle with rebuilding the window tracks makes me shiver a bit as I have that little job in my near future! I'm still iffy on C-10 Natl's....Will let you know....Fun vid, esp bloopers! All A+++++
If I can do it, anyone can! But faster! That green turned out really slick! I hope to see you down there!
The maximum overdrive soundtrack is awesome, mostly acdc. My son and I are attempting a full cab roof swap do to leaky gutters on our 69 C10. I just bought a donor 6.0/4L80 for a LS swap but want the rust fixed first
It was one of my favorite soundtracks! That roof repair seems challenging! I have never tackled one. Good luck to you guys! Before you know it, you'll be dropping the LS right in. Thanks for watching!
Great video!
I appreciate it!
You guys are a trip! The truck is looking 👀 great!
Maximum Overdrive soundtrack is awesome.
My wife and I was talking about that movie the other day with this automatic robot stuff just like the movie 🎥. Yeah, us generation X people have watched way too many Stephen King movies to deal with that crap💩. Lol. I even hate the self checkout things at Walmart!! 😡 Late 80’s they said computers were going to take peoples jobs, Everyone laughed, well here ya go! A robot is a computer that a person programmed. 🤷🏼♂️
Isn't that the truth. We had to figure out how to use the kiosks at McDonalds the other day because they didn't have enough employees to work the counter. 45 days later we got happy meals with onions, because I didn't scroll down far enough to uncheck the box.
I don't remember another movie that had an entire band soundtrack in a movie. I've been listening to it the last week. So good!
She lookin good boss
Thanks! Garrett has been getting after it!
I wish I could make it this year. I won't be done this summer.
Hopefully next year. Building a 70 CST with an LT4/10L90E with a speartech harness and putting a RS Chassis under it.
Holy smokes and yes please! I can’t wait to see that one!
Diodes are the check valves of electricity, and not just Light Emitting Diodes (LEDs). They only flow current in one direction and prevent it in another. They are used to protect circuits from feedback. That’s also why LEDs only work with polarity in a certain way.
Where were you when we were screwing it up? lol. Thanks for sharing that info. I like the check valve reference! Makes sense to me.
You are in. Yego Chad
I'm wondering if you guys have the factory assembly manual for these trucks, they are a great resource
We each have one. Garrett's is still in the plastic on his desk and mine is at the house. We are welled prepared!
Chad looks great , my question for the truck neard is can i swap a 68/72 P/S box in my 67 I would like to eliminate the hydraulic power cylinder that my truck came with,(it leaks and I can’t seem to find any replacement parts ) and just go with the conventional power steering???? I realize I would use the Center, Link and Pitman arm from the 68 to complete the job. It’s where the box mounts to the frame that I was concerned with maybe for no reason.????
Thank you! No problem switching over to a 68-72 steering box. You will need to either indent the frame or use spacers since the 67 did have the frame indent provision. Shimming it is probably the better way to go, so you don't mess up the frame.
Hi Chad looking good. I’ve got a 67 is there a template for the side mirrors, put one piece windows in and want to place the side mirrors ahead a tad ?
We used the side mirror gaskets for screw alignment. As for exact factory location on the door, check out 67-72chevytrucks.com. There is a bunch of great info on there.
@@ItsTheChad71 thanks
Now just add some 18’s on the front and 20’s (wheels) in the back. $20k. 👍
That would be pretty slick!
Chad you have a how-to on replacing the vent wdo seals by chance?
I don't yet, but it's on my list.
Chad how's the new Garage going do you have any idea on the vent windows are all black what color black should they be gloss, semi gloss or what thanks for any help
I need a new shirt! 👕 what’s coming soon? 😜
You just have to wait and see! Lol
Stay away from the 1-piece windows.
They only like all the way up or all the way down.
No support anywhere in the middle.
That’s good to know! I wouldn’t have thought of that.
I’ve heard the same on these one piece windows too! Rattling a lot. I’ve got enough that rattles. Lol.
Ess -cutch- unn.
Ess -cutch- eon.
Escutcheon.
Who named it?
They aint from here.
But if your name was Louis Chevrolet, where were your people from ?
Karl Benz invented his engine, Daimler did a bunch with the car design.
They had to name the car after a guys daughter, because he provided the building they built them in.
I wont mention Henry except he built his first engine in his kitchen and lived on Fairlane drive.
Sorry.
Its a chevy channel, i know.
It's funny how i get tripped up pronouncing auto part words! I never knew about living on Fairlane drive! I'm always willing to learn new info, even if it's a Ford!
You guys married?
Worse! Related by blood!