Those old time farmers knew a thing or two about a thing or two and Ford/Ferguson knew how to deliver what they needed. Reliability, nothing fancy...just gets the job done. That's the beauty of those old Fords and Fergusons.
If you're using any kind of digging implement, like that spud plow, make sure you have your draft control lever on, your top link in the highest notch where it connects to the tractor, and let your top link out a little bit to drop it deeper. You'll be surprised how consistent you can get the depth of those rows when you really get good with these things.
I am thinking about purchasing a 9 myself. Told it’s an excellent mechanical condition and comes with four or five attachments. All the basic ones and a cement mixer. My problem is I just don’t know what the older ones are worth because I’m used to looking up the 8n. For one of these in very good condition with a handful of attachments, what what would you guys pay. Going to be on a very small 5 acre piece of land and only used on occasions for bush hogging and maybe odds and ends.
The way to know if it's 9n or 2n is by serial number. 9N were older, from 1939-1942 (9 is from '39), then in 42 went to 2N ('42-47), then in '48 (8 for '48) went to 8N. All 9N and 2N serial numbers start with "9N". Look up "ford 8n serial lookup" and you'll find a list of serial numbers by year - Serial number is on the driver side, on a raised boss to the right of the oil filter barrel. You're right though, all the 2Ns had the oval radius rod, only early 9ns had an ibeam style.
ALMOST all correct info here...but nope, not ALL 2N's had the the oval radius rods...they had the I beam type up until mid-1944...look it up..This tractor is most likely a late 1944-1947 model...
2n i think my 9n has i beams almost the same tractor. 2n was designated in 1942 so ford could raise price cause wartime price freeze 9n could nota go up in price and it was too low of price.
None other than our Vice President, 1988-1992, under George H.W. Bush..he corrected some school kid on spelling "potato" and told them it was spelled"potatoe"..of course, he was incorrect, and as it was caught on camera, the press was all over it, and it was a running joke for years...maybe you are a lot younger than me, I was around 25 at the time, and still remember it well.. :)@@larrysblueberryfarmandgard1177
Wow, do you really have a '39 9N? what's the serial number, 39's are rare. If it's a '39, it should have aluminum hood, snap-in battery cover(not hinged), aluminum grill with horizontal bars, 32" rear tires, fenders with 2 ribs pressed into them instead of 1, left and right brake pedals that are identical, without the curve in the left one like later ones, rear axle hubs with smooth surfaces, not riveted like later ones, and some other unique features. Of course, some of this stuff could have been changed over the years, but it should still retain some of these features. If it has NONE of these features, it most likely is not a '39...
Looking by the features, it's a 2N for sure, not a 9N..don't be confused by the serial number(on the engine block) starting off "9NXXXX", because that's the way BOTH 9N's and 2N's were serialed. That auxillary transmission is nice, it's a Sherman transmission, named for the Sherman Brothers who made and sold them. I do like the patina on your tractor(not the black grill though)..many of these 9N and 2N tractors have been incorrectly painted red and light gray, like an 8N...None of them ever came from the factory that color, they were all originally painted overall medium machinery gray....
![ค้างคืนโรงเก็บกระสวยอวกาศร้างกลางทะเลทราย [Around The World Ep. 3]](http://i.ytimg.com/vi/E5bWZQhABJE/mqdefault.jpg)
Those old time farmers knew a thing or two about a thing or two and Ford/Ferguson knew how to deliver what they needed. Reliability, nothing fancy...just gets the job done. That's the beauty of those old Fords and Fergusons.
@@jasonerb2577 definitely
Thanks for sharing , nice Tractor!
Having any N series is a great have!
Would really love to see you hill those spuds as they grow
If you're using any kind of digging implement, like that spud plow, make sure you have your draft control lever on, your top link in the highest notch where it connects to the tractor, and let your top link out a little bit to drop it deeper. You'll be surprised how consistent you can get the depth of those rows when you really get good with these things.
Nice. Sounds like a good runner.
So fsr, so good and a lit of fun too
I am thinking about purchasing a 9 myself. Told it’s an excellent mechanical condition and comes with four or five attachments. All the basic ones and a cement mixer. My problem is I just don’t know what the older ones are worth because I’m used to looking up the 8n. For one of these in very good condition with a handful of attachments, what what would you guys pay. Going to be on a very small 5 acre piece of land and only used on occasions for bush hogging and maybe odds and ends.
She's running great! Got a few more weeks before we start putting anything in the ground in Ohio. This is making me anxious now lol.
The way to know if it's 9n or 2n is by serial number. 9N were older, from 1939-1942 (9 is from '39), then in 42 went to 2N ('42-47), then in '48 (8 for '48) went to 8N. All 9N and 2N serial numbers start with "9N". Look up "ford 8n serial lookup" and you'll find a list of serial numbers by year - Serial number is on the driver side, on a raised boss to the right of the oil filter barrel. You're right though, all the 2Ns had the oval radius rod, only early 9ns had an ibeam style.
Thank you. Good to know. I'll definitely try looking it up. On the motor it says 9N , very confusing
ALMOST all correct info here...but nope, not ALL 2N's had the the oval radius rods...they had the I beam type up until mid-1944...look it up..This tractor is most likely a late 1944-1947 model...
my 47 2N is stamped 2N abouve the serial number on the left trans axel bell by the pto lever.
Looks like a 2N
2n i think my 9n has i beams almost the same tractor. 2n was designated in 1942 so ford could raise price cause wartime price freeze 9n could nota go up in price and it was too low of price.
Potatoe? Remember Dan Quayle?...
Not sure who that is
None other than our Vice President, 1988-1992, under George H.W. Bush..he corrected some school kid on spelling "potato" and told them it was spelled"potatoe"..of course, he was incorrect, and as it was caught on camera, the press was all over it, and it was a running joke for years...maybe you are a lot younger than me, I was around 25 at the time, and still remember it well.. :)@@larrysblueberryfarmandgard1177
@@dyer2cycle word check gets me all the time, lol
You were fortunate to get one with a Sherman transmission! I've got a '39 9n. Runs like a top. Just bought a '58 601.
I definitely like it. It gives it a high or liw gearing
@@larrysblueberryfarmandgard1177 sherman low range is priceless
I use low range a lot when plowing. Nice to have a high , low range choice
Wow, do you really have a '39 9N? what's the serial number, 39's are rare. If it's a '39, it should have aluminum hood, snap-in battery cover(not hinged), aluminum grill with horizontal bars, 32" rear tires, fenders with 2 ribs pressed into them instead of 1, left and right brake pedals that are identical, without the curve in the left one like later ones, rear axle hubs with smooth surfaces, not riveted like later ones, and some other unique features. Of course, some of this stuff could have been changed over the years, but it should still retain some of these features. If it has NONE of these features, it most likely is not a '39...
Looking by the features, it's a 2N for sure, not a 9N..don't be confused by the serial number(on the engine block) starting off "9NXXXX", because that's the way BOTH 9N's and 2N's were serialed. That auxillary transmission is nice, it's a Sherman transmission, named for the Sherman Brothers who made and sold them. I do like the patina on your tractor(not the black grill though)..many of these 9N and 2N tractors have been incorrectly painted red and light gray, like an 8N...None of them ever came from the factory that color, they were all originally painted overall medium machinery gray....
Thank you. 9N or 2N it's a great very useful tractor. I don't think I'll repaint the tractor. Love the original design and look of an old tractor
Rear wheels say 9n