VERY GOOD VIDEO!! I had a little issue getting the box to work but it did. Might want to ad that if the truck is running and you want to turn it off, hit the lock button three more times.
Update. It worked. It has worked very well. I did it a little different than this video and it worked. At first, it worked and then the locks wouldn’t work. Then it didn’t work at all. I found another video on this where the guy says there are updates and different procedures to program the unit. So, I don’t know what the heck I did but it was a little different than what’s in this video and it’s working very well now. Good luck you guys. Looks like it’s great.
Guys if you have trouble receiving the confirmation email check your spam folder that’s where mine was also I just installed this on a 22 ram 1500 and I did have to install the ignition tap wire for the system to work. Hope this helps.
You did not have to tap into the ignition wire on block E of the BCM? I have the exact same looking harness but it is an MPC starter. Install is exactly the same except I am supposed to unplug Block E from BCM and tap into the white/pink wire. FRICKEN IMPOSSIBLE without breaking something.
Installed, remote started once. Won’t do it again. I’m not calling them to be on hold or wait for emails. I repeated everything a few times. Going to return this kit.
Hopefully you can help with my question I’ve looked everywhere and can’t any answers! How does this do for cold season does it let you set a timer for the grid heater to heat up or does the truck not let it start until the preheat cycle turns off? I’d like to buy this kit but that one question is stopping me until I know the full answer TIA!
I reached out to Start-X and this is what I got back from. Thank you for your interest in our products. Our kits are programmed to accommodate diesel engine requirements. I have personally never installed one on a diesel hopefully this helps.
I still have problems with mine. Don’t even use it. I called the company and they tried to sale me something to “ maybe “ fix the problem!!! I was like are you kidding me
Great Video thank you for your help! Side note...I know you make money by ads.... but you should really removed ads in the middle of the video. Its frustrating having to watch ads when rewinding and fast forwarding on these videos.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.15 (3/4)](http://i.ytimg.com/vi/IVwR87OH0_A/mqdefault.jpg)
Great video! I bought one off of eBay and had to go into the web link software and reconfigure it for my model. Works great!
VERY GOOD VIDEO!! I had a little issue getting the box to work but it did. Might want to ad that if the truck is running and you want to turn it off, hit the lock button three more times.
Great Video! Had a slight issue with the firmware but i think that may have been operator error...thanks for this video, you rock!
Awesome video. I have the exact same truck. My starter just got here today I'm install this weekend. Appreciate the video.
Update. It worked. It has worked very well. I did it a little different than this video and it worked. At first, it worked and then the locks wouldn’t work. Then it didn’t work at all. I found another video on this where the guy says there are updates and different procedures to program the unit. So, I don’t know what the heck I did but it was a little different than what’s in this video and it’s working very well now. Good luck you guys. Looks like it’s great.
Hey where’s this other video you are talking about …..
Ya I’d love to see this new video!
I've been waiting for the confirmation email for my account setup for 20 minutes now.
How do you program second factory key fob so 2 key fobs to be able to remote start the truck?
I am trying to install a Mobokey remote starter in Dodge RAM 2013. I have done the remote unlock part. Do you think you can help?
Guys if you have trouble receiving the confirmation email check your spam folder that’s where mine was also I just installed this on a 22 ram 1500 and I did have to install the ignition tap wire for the system to work. Hope this helps.
What's the range of the remote start?
You did not have to tap into the ignition wire on block E of the BCM? I have the exact same looking harness but it is an MPC starter. Install is exactly the same except I am supposed to unplug Block E from BCM and tap into the white/pink wire. FRICKEN IMPOSSIBLE without breaking something.
No I didn’t have too with this one.
Installed, remote started once. Won’t do it again. I’m not calling them to be on hold or wait for emails. I repeated everything a few times. Going to return this kit.
Hopefully you can help with my question I’ve looked everywhere and can’t any answers! How does this do for cold season does it let you set a timer for the grid heater to heat up or does the truck not let it start until the preheat cycle turns off? I’d like to buy this kit but that one question is stopping me until I know the full answer TIA!
I reached out to Start-X and this is what I got back from.
Thank you for your interest in our products.
Our kits are programmed to accommodate diesel engine requirements.
I have personally never installed one on a diesel hopefully this helps.
Thank you very much!
Thanks for the vid bro!
Question why you didn’t just go in on the other side?
Nice video! so what if i get this and buy an OEM ram remote start key fob? Would that work you think?
I don’t believe so
I'll be curious to know how it responds to the fast idle on the cummins platform. Just got one for my 23 cummins.
Definitely keep me posted I personally haven’t heard how well they work on a diesel.
Im still trying to figure out which cable it was that he pull at the beginning
Remote start works but truck won’t unlock the doors?? Any idea why? Thx
No idea I would definitely be calling start-x
Same here. Locks won’t work. Now it won’t even start
I still have problems with mine. Don’t even use it. I called the company and they tried to sale me something to “ maybe “ fix the problem!!! I was like are you kidding me
Mine wouldn't read my device. HELP.
Does it work on a MAC?
Very good video
Would the process be the same for the 1500 ?? I would assume so
I believe so for these years but haven’t done a 1500
Would this work on a Promaster 3500 ? Is it basically the same ?
I would think so, but you would definitely need to check with the manufacturer. I have only put these in Ram 2500s
Do you know if it will work on a 23 ram 2500 6.4 hemi. I have the push button start already.
I believe so. But definitely check there website!
Do you have the link to order one for my 2021 ram 2500 diesel
Start-X Remote Starter Kit for 2019-2022 RAM 2500/3500 || NOT 1500 || Plug N Play || 3X Lock to Remote Start a.co/d/6PiU31z
@@BASgarage Thank you
My truck cuts off when depressing the breaks :/
Great Video thank you for your help!
Side note...I know you make money by ads.... but you should really removed ads in the middle of the video. Its frustrating having to watch ads when rewinding and fast forwarding on these videos.
Hi how you connect it to the computer to programm?
Comes with a small USB cable