Thank you. I've installed it. Right now the current challenge is the "Failed to get the face support of the sketch" error message, despite following the steps to the letter. I've fixed the SVG file and all, but the error is persistent. I'm stuck at 4:29.
Huh, Try adding a square in the "Mapped_Sketch001" through the sketch workbench and see if it projects. if it does it's the SVG file that's the problem. so I suggest trying another SVG file. if the square doesn't project tell me and there are a couple things you can try.
@@TabletopRobotics You mean the square as a Construction line? I already did to make sure it selects the image. I even changed the sizes to see if it has something to do with it. It's just persistent. I will try to create a new surface to work on, I'm not really sure where exactly the error is. I'll also try your suggestion above and will try other (non-construction) normal shapes like circles and other polygons to see if extrudes or not.
OMG there was one critical thing I didn't know which had been making this impossible. I didn't know you could move the perimeter around of the construction geometry in the mapped sketch! I was pulling my hair out trying to figure out how to get the sketch exactly where I wanted it. Thank you!
Wow you are incredible 💞 Thankyou for the inkscape to freecad insight You have saved me a lot of effort and the more creativity I am loving 😍💗 it you genius
Hey I know this is 2 years old, but I am trying to add the design as a copy (4:10) but I can't click the other sketch with that tool, am I missing something?
If I try to add a simple shape using this method I can get it to "extrude" out but when I want to have go inward like a pocket it just does nothing. Am I doing something wrong? Like if I make thickness a negative number. It doesn't give me an error message it just simple doesn't do anything looks flat to the surface.
Why don't I have the Curves Workbench? It's the same 0.19 version I'm using and I have just installed it this June 2022.
you need to install it, watch part one. i show you how to install it there:)
th-cam.com/video/yV26cig0p4I/w-d-xo.html
Thank you. I've installed it. Right now the current challenge is the "Failed to get the face support of the sketch" error message, despite following the steps to the letter. I've fixed the SVG file and all, but the error is persistent. I'm stuck at 4:29.
Huh, Try adding a square in the "Mapped_Sketch001" through the sketch workbench and see if it projects. if it does it's the SVG file that's the problem. so I suggest trying another SVG file. if the square doesn't project tell me and there are a couple things you can try.
@@TabletopRobotics You mean the square as a Construction line? I already did to make sure it selects the image. I even changed the sizes to see if it has something to do with it. It's just persistent. I will try to create a new surface to work on, I'm not really sure where exactly the error is. I'll also try your suggestion above and will try other (non-construction) normal shapes like circles and other polygons to see if extrudes or not.
OMG there was one critical thing I didn't know which had been making this impossible. I didn't know you could move the perimeter around of the construction geometry in the mapped sketch! I was pulling my hair out trying to figure out how to get the sketch exactly where I wanted it. Thank you!
Wow you are incredible 💞
Thankyou for the inkscape to freecad insight
You have saved me a lot of effort and the more creativity
I am loving 😍💗 it you genius
Hey I know this is 2 years old, but I am trying to add the design as a copy (4:10) but I can't click the other sketch with that tool, am I missing something?
If I try to add a simple shape using this method I can get it to "extrude" out but when I want to have go inward like a pocket it just does nothing. Am I doing something wrong? Like if I make thickness a negative number. It doesn't give me an error message it just simple doesn't do anything looks flat to the surface.
Wow thank you verry good🥰🥰🥰🥰
Hi is there any way we can control arduino with laptop using Bluetooth?
💯