3d Printing Two Color Signs Text in FreeCAD
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2024
- Learn how to add 3d text to your models with FreeCAD. In this video, you will learn how to use ShapeStrings in FreeCAD and how to use Bounding Boxes to position components of your model. This technique is perfect for designing models with 3d text you will print on any 3d printer, including printers from Prusa, Creality, Monoprice, Anet, Flashforge, and JG Maker that I have reviewed on this channel. In the video, I demonstrate how to use IdeaMaker to split apart models and print them in 2 colors.
The following playlist includes additional videos about multiple color 3d printing:
• Multiple Color 3d Prints
The following playlist is a good place to learn FreeCAD:
• FreeCAD for Beginners
Content in this Video
00:00 Introduction
03:10 Using Text in FreeCAD
4:20 FreeCAD Part Design Workbench
8:56 FreeCAD Draft Workbench
11:13 Locating Font Files
13:37 Using ShapeStrings
16:03 Understanding FreeCAD Bounding Boxes
17:43 Using Bounding Boxes in Formulas
19:06 Extruding / Padding a ShapeString
20:10 3d Printing a FreeCAD 2 Color Model
21:25 Splitting Colors in IdeaMaker
Let's continue to learn together. Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and website.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printe...
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-...
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printe...
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printi...
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
➡︎ kit.co/makewithtech/software-...
Some of the Woodworking products I use:
➡︎ kit.co/makewithtech/drvax-woo...
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third-party images. Images and videos used in product reviews and tutorials are from the original product (software or hardware) manufacturer's site.
** We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
---
The MakeWithTech channel teaches people how to use desktop technology to create, innovate and make things. If you are a "maker" and want to learn more about 3d Printing, 3d Printers, 3d Printing Slicers, Computer-Aided Design (CAD), or 3d Modeling, this is a place you should visit often. The channel includes additional content about using a wood lathe, woodworking, programming single-board computers such as the Raspberry Pi and Python. Available reviews are about Prusa, Creality, Monoprice, ANET, JG Maker, and Flashforge 3d Printers. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker. - แนวปฏิบัติและการใช้ชีวิต
Sir, yours are some of the best videos I (an old engineer) have found. Thank you!
This is exactly the video I've been looking for. Thanks!
It is well worth the effort to learn FreeCAD. There is so much you can do with parametric modeling.
Thanks Irv!! I've been using shapestrings for quite a while but never used the bounding box. I always learn something watching your videos. Thanks again!
Happy to help!
Great video as always 👍
I love that you found this center feacture
Thanks for sharing your experience with all of us 👍😀
Glad it worked for you.
Thank you for a great video, I was wondering if you have a video on multi color that are all flat almost like inlays?
Great tip on measuring the text. In PrusaSlicer, you can slide the pointer to the right layer and click on the button there to add a color change. It even shows in the preview so you know you got it right. (The color change happens before the selected layer, not after.)
Thank you for taking your valuable time to share your knowledge! You're truly a good man.
Thanks for taking the time to share your knowledge.
Thanks for this video. A really neat trick with the parameters that’s saved me a lot of work 😀
Thanks for sharing!
Such a great teacher!
Nice video though if I try to export an stl like you do, Cura always flags it as not watertight. So, I usually bring up the mesh workbench and create a mesh from body or something like that. Once the mesh is created I am able to export the mesh stl which is now watertight.
Success! I did not do it quite like you did, but I was finally able to add text to my model and this video helped me figure it out. What I did was create the string I wanted though I used the fonts in C:/Windows/fonts. Then I added it to the body, used transform to move it into position and then used either pad or pocket in the part design workbench. Worked great.
Exactly what I needed today. thanks.
Thanks for the video Awesome as Usual!!
THANK YOU, THANK YOU, THANK YOU
Fantstic. You are amazing
DrVax Thanks for the very visible pointer and icons. It also help by you clearly and at the right speed explaining what you are doing. This is great!!! Now the Constrains and Measurements.
If you look at your videos on TH-cam due to the blue screen the Constrains and Measurements are hard to see due to red on blue. We found the best screen is white'ish or grey'ish with the Constrains and Measurements in black. Is it possible for you to test this and see the results.
Very very nice and clear pointer
Thank you
I absolutely love your videos and your ability to teach. I jumped right into this video and understand it completely. Do you have another video on how to make a border around it extruded to the same height of the text?
Great profesor!!!
Dear Irv, thank you again for your videos. They are very informativ. But this time there are two things I do not understand.
1. I don’t have an idea why your formular to center the text works. How does freeCAD know what shape is meant?
2. I successfully placed text on a surface. But the body with that surface is now placed in front of a weird plane which has an angle of prox. 20 degrees to the XY plane. I don’t know, how to get rid of it. It’s hard to describe.
Keep on going and stay healthy!
Great Video Doc, How do i just print Text alone, either a word or just a letter?
thanks doc for great video, i fallowed your video until the timer i was going to pad the letters but every time i hit the pad it will disappear completely
Can you do a tutorial using Shapr3D on iPad?
Thanks ever so much, Irv!
I use freecad a lot and I have a good idea that it will have taken you hours to find out how to make text work parametrically like this.
The whole point of FreeCad is that it's parametric, and I always felt very awkward kludging things manually to get text to fit properly onto my solids.
The part about adding components to bodies by dropping them onto the list was also very useful.
You're awesome!
A request: could you help us work out how to project things onto surfaces using FreeCad? I've seen the tool but I'm too frightened to use it!
Happy to help.
How could i aplply this to create informationial text on and next to peices for cutting on a laser cutter, anyone know?
I have Version 0.21 of FreeCad. the Shape.Boundingbox parameter in not there?
I'm more interested in how to create a multi-colors model in FreeCAD to send to a print shop. I have no printer. I suspect STL is not the answer for my use cases.
Thanks, that's useful new information I didn't know about. Unfortunately I wasn't able to get it to work in my Freecad setup (Version 0.19 Fedora Linux). I followed along carefully, but the formula editor returns "Result: No attribute named 'BoundingBox'".
Interesting. Makes you have the case of the parameters exactly the same as my example. Case matters in Freecad parameters.
@@MakeWithTech Thanks for replying and prompting me check again (even though I was checking case etc very careful umpteen times....) It turned out that I was typing BoundingBox instead of BoundBox. Works now! Many thanks.
@@warped_spacetime My pleasure.
Dr. Val, I follow all what you said in your video but I clic on protusion, it's take time, then my part disapear and if I put an heigh then clic OK, I get an error message telling me Pads: Result has multiple solids. This is not supported at this time!
Can you tell me what I do wrong ?
I did it one time and all was OK, but non, nothing work!
I got the exact same problem.
@@pandaxz93 also
Good video, although I was hoping it was to show how to inlay the text into the surface of a part (so it could be printed as separate text and part on single extruder printer)
Just use a pocket instead of a pad.
@@MakeWithTech Yes, but the padded text would need to be slightly enlarged (in outline) to account for 3d printer inaccuracies. Changing the padded font size wouldn't do this.
I did not understand what you were looking to do. You are correct scaling up a complex shape does not work. Maybe combining a bold font with a regular font would work. It would take some experiments to work it out.
@@MakeWithTech I would print the text in one color, then print the part in another color (for us mortals with simple 3d printers). The part would have the pocket of the text (for alignment and ease of gluing). I've found my Ender3 there needs to be about .2mm boundary around tightly fitting parts.
I'm all cocked up here. I'm using release 0.19 (Git 24291), but when I try to pad the ShapeString, in PartDesign, I always get "Pad: Result has multiple solids . This is not supported at this time." What am I doing wrong, as I am following your video to the letter ?
I get the same thing
I can not use bounding in the formula, error no attribute named Bounding. Any help would be great.
Bound not Bounding
Dear Dr. Wax.
PLEASE don't start to speak in the first 3-5 sec of the video, since it have to do some cache before we can here it, and I always have to restart ANY movies on TH-cam doing to this.
Else? You always do so great content for us, thank you :-)
You might look into like Voron or RatRig CoreXY printers .... I think you will be greatly surpriced how good they are.
Good advice thanks
How do I get any reply ??? Do I need to join some other "paid subscription channel" ???
What on earth is the "Doctor VAX Channel " mentioned at the start of this video ??? I thought I had subscribed to MakeWithTech ?????
Is Erb / Erv / Erne / Erg Shapiro actually Dr Vac/ Vax ???
Will he bother to respond to any of the comments posted here ????
Oh no. I hit the subscribe button too hard...
This is akin to buying a Lamborghini, only to discover that "the steering wheel" is not yet supported.
A complete waste of my time. I cannot pad onto a multiple solid ????? That means it is useless to attach it to ANY previously designed solid ???? W.T.F. ???
Bla bla bla
Skipped through this vid...normally find your stuff very informative but , good god this was painful, needlessly involved and slow. I rejoice that I discovered Design Spark Mechanical especially for my text needs ...Type in text box ...Project onto surface...extrude or emboss. Done!