I have just watched this about 10 times trying to get my rig back up and running. This was after an issue with OneDrive. This video was a literal Godsend. I will be buying some merch from your store to thank you for saving what's left of my sanity. Thank you sir!
took a bit of playing around with but i got it! im so glad because i use 3 different monitors and nvidia surround wouldnt let me run at 144hz, bu this did the trick! you're the man
This was a great tutorial i racing is one of the most confusing games for people that aren’t into computers and this video made it so I could flawlessly set up my triple screens thanks man
Thank you so much for explaining this. I can get to the point where you can tell it’s setup for 3 screens but can’t actually get it to use all 3. I used to only use Nvidia Surround but ever since I did a “graphics config” in the iRacing settings it’s been messed up for me. Anybody got ideas?
Sir, I’m trying so hard to get my 3 monitors working like yours and having no luck. To begin it loads in the right screen instead middle. Any suggestions on fixing it?
Technically, yes. That is also correct because it then measures the bezel width which is horizontal. I had someone teach me this way years ago and I haven't noticed any actual issues with just putting in the monitor size.
@@AnthonyAlfredothe prompt clearly states horizontal measurement so it would miscalculate the proper fov. Not that it wouldn’t be usable still. Just might want to put an annotation or something in. Otherwise nice job
I'm having an issue with getting triple screens connected I have all 3 screens on but when I go to iracing it zooms out really far and you can see where the three different screens would be, but it will not put the picture on the other 2 screens. Can someone help?
Does anyone know how to help me with Iracing? I do everything correctly, it opens the three screens normally, but when it finishes loading it returns to a single screen, and the file returns to the original as if I were using a monitor
Mine is only showing on the right two monitor. What should be my center screen is showing on my right monitor, left screen is showing on my center monitor. Please help!
Make sure windowedAlighnment is 0, and make sure windowedXPos is -1920 (1920 is my resolution). Make sure you have the negative (-) in front though. Sorry for the last replys
@@jasonpowelliracing5481 I have my x position set to -2560 (my resolution) and my windowed alignment is 0. Still only shows up on center and right monitor
Just add the width of all three together. The outer two likely has a lower resolution than the middle one. It depends on the resolution of each monitor.
@@rubbingisracing6951 Are you still using this configuration? Mind sharing your settings? I'm trying to do the same configuration. 32in center monitor and 27in for left and right monitor.
I have just watched this about 10 times trying to get my rig back up and running. This was after an issue with OneDrive. This video was a literal Godsend. I will be buying some merch from your store to thank you for saving what's left of my sanity. Thank you sir!
Glad it helped!
never thought id se a cs driver making iracing tutorials espescially including ini files. good stuff
took a bit of playing around with but i got it! im so glad because i use 3 different monitors and nvidia surround wouldnt let me run at 144hz, bu this did the trick! you're the man
This was a great tutorial i racing is one of the most confusing games for people that aren’t into computers and this video made it so I could flawlessly set up my triple screens thanks man
Thanks! Only current video I could find that didn't reference the app.ini file for all the changes.
2:40 good tip about running border=0
but i think that is not the difference between border 1 and border 0 but the difference with fullscreen?
Good stuff.. Question does the 3 monitor setup hurt the performance of the PC? Fps ? Slowing the processer down?
Thank you so much for explaining this. I can get to the point where you can tell it’s setup for 3 screens but can’t actually get it to use all 3. I used to only use Nvidia Surround but ever since I did a “graphics config” in the iRacing settings it’s been messed up for me. Anybody got ideas?
Hello. will the performance be better with your settings? or is there no difference with nvidia surround?
Did you mean to not enable SMP/MVP
after selecting Render scene using 3 projections?
Brilliant video.
32" monitors are not 32" wide, they are about 28" wide. Should also enable the SMP
+1 for running borderless
Sir, I’m trying so hard to get my 3 monitors working like yours and having no luck. To begin it loads in the right screen instead middle. Any suggestions on fixing it?
Does nivida surround work in iracing?
Yes, but then the triple monitors work as one span instead of three individual screens. It's personal preference.
Hey there. Thanks for the video. I tried to implement your suggestion and my rendererDX11.ini file is empty/blank. Any suggestions?
You may need to launch iRacing and auto configure the graphic settings first, then leave the session and go back to the file to make changes.
You appear to have put the diagonal measurement of your monitor in as the width. Shouldn't you measure the width of the monitor instead?
Technically, yes. That is also correct because it then measures the bezel width which is horizontal. I had someone teach me this way years ago and I haven't noticed any actual issues with just putting in the monitor size.
@@AnthonyAlfredothe prompt clearly states horizontal measurement so it would miscalculate the proper fov. Not that it wouldn’t be usable still. Just might want to put an annotation or something in. Otherwise nice job
did the same thing about 5 times can't get it to work 5760x1080 npt giving me and opition on resolution
My .ini file does not have all those options.?.?.?
I'm having an issue with getting triple screens connected I have all 3 screens on but when I go to iracing it zooms out really far and you can see where the three different screens would be, but it will not put the picture on the other 2 screens. Can someone help?
Found the solution? I have the exact same problem
The borderless width.
You need to change it to your total resolution of the 3 screens
Does anyone know how to help me with Iracing? I do everything correctly, it opens the three screens normally, but when it finishes loading it returns to a single screen, and the file returns to the original as if I were using a monitor
Mine is only showing on the right two monitor. What should be my center screen is showing on my right monitor, left screen is showing on my center monitor. Please help!
So apparently you cant use windowedAlighnment, you have to keep it at 0.
I have the window alignment at 0 and I’m still having the same issue as you. Any other suggestions?
@@matthewscala2224mines doing same thing anything fix it?
Make sure windowedAlighnment is 0, and make sure windowedXPos is -1920 (1920 is my resolution). Make sure you have the negative (-) in front though. Sorry for the last replys
@@jasonpowelliracing5481 I have my x position set to -2560 (my resolution) and my windowed alignment is 0. Still only shows up on center and right monitor
mine just randomly stopped show 3 monitors today, and this didnt even fix it
Did you ever find a fix?
bruuuuuuuh why don’t the allow just two monitors 😂 this some bs now i gotta go buy a whole ass monitor lol
Why would you want only two? Then there would be a bezel right in the middle of your view in the way haha
Unless you mean one in the middle and another on the left or right.
@@AnthonyAlfredo i only have two 😂 but i’m getting 2 new ones and replacing an older one of mine
@@AnthonyAlfredo and yes that’s how i’d have them setup for dual
i use a 32" monitor in the middle and 25" on each side what do i put for width?
Just add the width of all three together. The outer two likely has a lower resolution than the middle one. It depends on the resolution of each monitor.
@@AnthonyAlfredo yeah I set them all at 1080
@@rubbingisracing6951 Are you still using this configuration? Mind sharing your settings? I'm trying to do the same configuration. 32in center monitor and 27in for left and right monitor.