Simon says ...... fresh out of the box ! Great video & tutorial Simon ! Can you diversify further to Assetto Corsa Competizione or is that blasphemy ??? 🙂 Another topic : if all hardware settings done, maybe provide some good insights in different car / track setups for iRacing and ACC ? can't understand there aren't any more followers yet, in any case I already subscribed ! keep on the good work ! 👍🤘😎
Thanks! It’s definitely not blasphemy but after a few years of running all of those titles I now just focus on iRacing and don’t have the others installed. Maybe I’ll come back to them at some point…! Agree on the car setups front, that’d be a nice area to get into but as I don’t consider myself an expert, I will need to tap some of my higher iR pals. Watch this space on that front, some things in the works… Appreciate your suggestions and thanks for subscribing!
Thanks for making this. I'm running the same screen resolution and followed your settings but when i start a test race and after driving for about 10 seconds iRacing crashes. If I restore the base INI file (single monitor mode) it runs fine. [Display] windowedYPos=0 ; Window top left corner in windowed mode windowedXPos=-2560 ; Window top left corner in windowed mode windowedWidth=7680 ; windowed mode width windowedMaximized=0 ; Window is maximized in windowed mode windowedHeight=1440 ; windowed mode height windowedAlignment=0 ; windowed mode alignment: 0 - none, 1 - center, 2 - top left pixelRatioWindowed=1.000 ; Windowed mode - Adjust for displays with non-square pixels pixelRatio=1.000 ; Full screen mode - Adjust for displays with non-square pixels RefreshRate=180.000 ; Refresh Rate ModeScaling=0 ; 0=unspecified 1=centered 2=stretched HDRFormat=0 ; 0=8 bit color (SDR) 1=HDR10 or HDR16F (depends on fullScreenDepth 32/64 bit) fullScreenWidth=2560 ; full screen Window's width fullScreenHeight=1440 ; full screen Window's height fullScreenDepth=64 ; Color depth fullScreen=0 ; fullscreen? displayRotateMode=1 ; 0-auto, 1-landscale, 2-landscape inv, 3-portrait, 4-portrait inv deviceIdx=0 ; which adapter border=0 ; window border? [MonitorSetup] BezelProtectionPct=7 ; 0-10: % of screen width to keep UI elements away from bezels Min3ViewZoomDistortion=1 ; 0=off 1=when cameras zoom in alot, relax screen angles MonitorType=0 ; 0=flat or 1=curved NumMonitors=3 ; 1 or 3 EnableSMPSurround=1 ; 0=off 1=Enable Simultaneous Multi-Projection via GPU RenderViewPerMonitor=1 ; 0=off 1=separate view on each monitor (less distortion) RadiusOfCurvature=1000 ; (mm) Radius of screen's curvature (ignored if type is flat) ViewingDist=660 ; (mm) Distance from eyes to center of monitor MonitorWidth=609 ; (mm) total width of each monitor (screen + bezels) ScreenWidth=591 ; (mm) usable width of each screen (no bezels) ScreenAngles=45
Hi Simon, I recently upgraded to triple Samsung 1440p 32” screens with a 1000R curve and used your video to set them up. I was wondering what angle you set your monitors to?
Thanks for the video! Have you encountered any issues with Racelabs? I am having massive stuttering with Racelabs running with iracing and could not find a solution after lots of testing
Does anyone know how to help me with Iracing? I do everything correctly, it opens the three screens normally, but when it finishes loading it returns to a single screen, and the file returns to the original as if I were using a monitor
I have 3 1440p monitors. Id like to run them at 5870x1080. Like if I had 3 1080p monitors. But i can't get iracing to span all 3 screens without it beinging windowed.
Can you set the resolution of each monitor to 1080p in windows? You should be able to do that first and then follow the iRacing settings in the video to get the resolution you’re looking for
Hi Simon. For me, in the app.ini (DX11 Graphics) only the last 2 lines appear. HableHidenLoadMode=1 and uiSafeMode=0. Do you know why only those 2 lines appear? Greetings from Argentina
Hi there, since I recorded the guide, iRacing has moved the rest of the DX11 settings to the RendererDX11.ini file. The video is due an update to capture those changes but your app.ini file is good, I recently did a clean install and mine looks the same.
@@S1Races thank you for making this video but as its now changed is there anything I need change from the video or are all the settings in one folder now?
Simon says ......
fresh out of the box ! Great video & tutorial Simon !
Can you diversify further to Assetto Corsa Competizione or is that blasphemy ??? 🙂
Another topic : if all hardware settings done, maybe provide some good insights in different car / track setups for iRacing and ACC ?
can't understand there aren't any more followers yet, in any case I already subscribed !
keep on the good work ! 👍🤘😎
Thanks! It’s definitely not blasphemy but after a few years of running all of those titles I now just focus on iRacing and don’t have the others installed. Maybe I’ll come back to them at some point…!
Agree on the car setups front, that’d be a nice area to get into but as I don’t consider myself an expert, I will need to tap some of my higher iR pals. Watch this space on that front, some things in the works…
Appreciate your suggestions and thanks for subscribing!
Thanks for making this. I'm running the same screen resolution and followed your settings but when i start a test race and after driving for about 10 seconds iRacing crashes. If I restore the base INI file (single monitor mode) it runs fine.
[Display]
windowedYPos=0 ; Window top left corner in windowed mode
windowedXPos=-2560 ; Window top left corner in windowed mode
windowedWidth=7680 ; windowed mode width
windowedMaximized=0 ; Window is maximized in windowed mode
windowedHeight=1440 ; windowed mode height
windowedAlignment=0 ; windowed mode alignment: 0 - none, 1 - center, 2 - top left
pixelRatioWindowed=1.000 ; Windowed mode - Adjust for displays with non-square pixels
pixelRatio=1.000 ; Full screen mode - Adjust for displays with non-square pixels
RefreshRate=180.000 ; Refresh Rate
ModeScaling=0 ; 0=unspecified 1=centered 2=stretched
HDRFormat=0 ; 0=8 bit color (SDR) 1=HDR10 or HDR16F (depends on fullScreenDepth 32/64 bit)
fullScreenWidth=2560 ; full screen Window's width
fullScreenHeight=1440 ; full screen Window's height
fullScreenDepth=64 ; Color depth
fullScreen=0 ; fullscreen?
displayRotateMode=1 ; 0-auto, 1-landscale, 2-landscape inv, 3-portrait, 4-portrait inv
deviceIdx=0 ; which adapter
border=0 ; window border?
[MonitorSetup]
BezelProtectionPct=7 ; 0-10: % of screen width to keep UI elements away from bezels
Min3ViewZoomDistortion=1 ; 0=off 1=when cameras zoom in alot, relax screen angles
MonitorType=0 ; 0=flat or 1=curved
NumMonitors=3 ; 1 or 3
EnableSMPSurround=1 ; 0=off 1=Enable Simultaneous Multi-Projection via GPU
RenderViewPerMonitor=1 ; 0=off 1=separate view on each monitor (less distortion)
RadiusOfCurvature=1000 ; (mm) Radius of screen's curvature (ignored if type is flat)
ViewingDist=660 ; (mm) Distance from eyes to center of monitor
MonitorWidth=609 ; (mm) total width of each monitor (screen + bezels)
ScreenWidth=591 ; (mm) usable width of each screen (no bezels)
ScreenAngles=45
What specific settings in the ini file are you changing? Is it just the x and y position values or are there other adjustments you’re making?
Hi Simon, I recently upgraded to triple Samsung 1440p 32” screens with a 1000R curve and used your video to set them up. I was wondering what angle you set your monitors to?
I have mine set to 45 I think. A lot of it comes down to personal preference but I like having them wrap around my seating position
Thanks for the video! Have you encountered any issues with Racelabs? I am having massive stuttering with Racelabs running with iracing and could not find a solution after lots of testing
Sorry for the slow reply, what system are you running? And I assume if racelabs isn’t running the stutters go away?
Does anyone know how to help me with Iracing? I do everything correctly, it opens the three screens normally, but when it finishes loading it returns to a single screen, and the file returns to the original as if I were using a monitor
Can you talk through the edits you're making following in the ini file before opening the sim? And which ini file are you making the edits in?
I have 3 1440p monitors. Id like to run them at 5870x1080. Like if I had 3 1080p monitors. But i can't get iracing to span all 3 screens without it beinging windowed.
Can you set the resolution of each monitor to 1080p in windows? You should be able to do that first and then follow the iRacing settings in the video to get the resolution you’re looking for
@@S1Races I did some more research and figured it out.
What was the solution?
@S1 Racing I didn't have windowXPos at -1920. It was still and -2560
Have you checked to see I there is an fps increase not using Nvidia surround?
No it’s not something I’ve looked into or read about online. Have come across something in particular?
Hi Simon. For me, in the app.ini (DX11 Graphics) only the last 2 lines appear. HableHidenLoadMode=1 and uiSafeMode=0. Do you know why only those 2 lines appear?
Greetings from Argentina
Hi there, since I recorded the guide, iRacing has moved the rest of the DX11 settings to the RendererDX11.ini file. The video is due an update to capture those changes but your app.ini file is good, I recently did a clean install and mine looks the same.
Same here did you find a fix?
@@S1Races thank you for making this video but as its now changed is there anything I need change from the video or are all the settings in one folder now?