Good video, you understand everything you tried to explain, unlike some other people who just say do this do that and they have no clue what those things do
@@aldo_0000 just got a set of 27” and got them up and running today. seems like a really great size and looks good. i got 1080p looks good to me and i crush the 100 frames i set for them.
I only looked at small parts of the video - but I think 1 more detail is worth mentioning: "Technically", you cannot freely "pick" the angle between your screens. They depend on the distance that you sit away from the screen. For 32'' screens at 59-60cm, the optimal angle actually is 60°, which Dan has set up quite nicely for himself - it will also give you almost a full 180° FOV. That's why 32'' are the "sweet spot" for triple setups: You can place them over your wheel hub, at an acceptable distance and get a full 180° FOV just by obeying "the math" :)
@Paderborner5212 the issue for some with that is the bezel free kit requires 50 degree angle and not everyone can get their screens the correct distance for that angle.
Don’t forget to include the ‘digital’ bezel. That’s where I came unstuck. It’s the black line at the edge of the screen. We were lied to about the thin bezels!
@Dan Suzuki Your a legend. I literally asked for this a week or two ago because your old video is out of date as the ini file looks different now. Really appreciate it Dan thank you
Good video, especially because you do not, like many others, stick to the mathematical FOV, but also set it larger, and according to personal feeling :-) Since I have Triples I fluctuate between a FOV of 190 to 200 degrees. If it gets too "weird", I push the virtual seat forward with "X". What I miss are a few words about the "warping" that automatically appears with Triples if the eye level does not correspond exactly to a "Shift Horizon" of 0%. There are so many wrong formulas and information on the web about this....
Excellent video but I miss a POV from your eyes to view how the FOV change and view how you see the monitors, mayber recording with a phone could be enough, thanks. Great job, you have my like!
You can do it in seconds yourself. Just open a session. drive 200ft. stop the car and go back to the pits. Go into the replay and select cockpit view and pasue. Then open your graphics tab, select monitors and type in whatever ## you want in fov. Exit out of the graphics tab and back to the replay and it changes it instantly, you can fool around with it until you get it how you like it.
The one huge downside to surround for me - it (nvidia drivers?) would randomly reset the configuration and I would have to go in and set up surround again. This would happen at least once a week... "Oh, my displays are back to 3 independent screens.. I'll just go and configure surround again". Eventually I cracked it, and disabled surround, set up 3 displays, and iracing in bordleress window mode, and have never had an issue again (I really preferred surround though)
There's a program made by someone in the sim community called display magician Just started using it and surround never loses settings and I swap between on and off with the click of a button
Thanks for the video. I have never been sure about iRsidekick. Do you just have to have the program open for iRacing to use it? Does it use the settings automatically if it is open?
Nice vid, but for me nvidia surround and g-sync/freesync on enabled, middle monitor turns off for 1 second, cables are good 2k 240hz, and when i put bot via surround but via monitor dx file runs perfect. Issue i play rally games and i need to put nvidia surround for iR tripple setup via dxmonitor 11 file ( thats means not in surround mode) Dan have you enabled g-sync in surrond and also to check button below gsunc setting? You have to check it as only innthis ways freesync/gsync works.
Hi Dan, do you have any idea how to correctly setup triples (in iRacing and other sims) but with different aspect ratio screens ? I have a 49" G9 as center screen (5120x1440) and 2 G5's on the sides (both 2560x1440). Totalling 10240x1440. so far so good, i can get it up and running in a window spanned across the 3 screens. But what i'm struggling with is that the "bend" where it thinks i goes from the middle screen to the side screen is offset to the wrong position. It is like the 10240x1440 is divided in 3 equal parts instead of Different parts.
would you run I-racing settings as a single curved screen with a 103" total width? or run it as triples (they only have options for 3 curved or 3 flat- not 1 curved with 2 flat etc? I am currently running at 10240 x1440 with a -2560 offset in the Iracing monitorDLL- it looks good- but I feel like the side panels are a little off- curious on your input @@DanSuzuki
@@kitmilo as Dan mentioned, running it at a resolution of 15360x1440 works for iracing. in Triple screen mode in iracing. Basically rendering too much, but this way you have a proper view, rather than having distortions in the wrong place. Works perfectly here.
Hi Dan, I had the triples set with your old video and it worked just fine. Now I am trying to set using this new video and I just cat get it right. I saw your video many times, step by step but it wont show the 3 monitors, just the center one. Am I missing something? Anyone that can help its appreciated. I have a 4060TI 3 1920x1080 27" monitors. Tks (It works fine with your directions for ACC)
in regards to using the modern FOV calculator thing at the start to set the dimensions - would this change if you were running curved? ideally the length end to end should be the same, but the angle between the monitors would be different no?
In theory ... yes, but the difference will be very negligible, I think the impact of your head moving while driving is probably bigger than the "errors" you get from curved screens :D
@@DanSuzuki it is a shame iRacing still has not included the 'angle' for 3-curved screens. It is negligible, but when I set curved for my middle screen, it does look better. Wish we could have it for all three.
Hi Dan, I have a 34 inch Samsung g5 ultra wide 3440x1440. I am thinking of buying two 27 inch Samsung G5 2k monitors. Will these work as a triple with iracing? Do I just set my resolution to 3440+2560+2560?
Dont look what he isnrocking just get KTC H32S17 !!! I got them ! 250 eur/pcs. VA panel no ghosting dark black amazing for the price, i like it even more than my asus PG279Q ips panel! And 1500R is perfect! I almost bought cheap LG 32" also was afraid of curvature 1500 as my friend SAMSUNG g7 240hz 1000R curvature was too much for me. It is perfect for simracing 1500R incant imagine better option! I did a big homework and glad i did! It was a lot videos reviews watched feom my side while accidently saw about this monitor, fantastic gem formsimracers -btw 165hz freesync gsyns compatible, no ghosting any shit, i'm very picky! Returned my pg279q two times till got model without bleeding;) enjoy sims guys ;)
Hello Dan, I have 1 27 inch monitor and one 24 inch monitor. I have seen users using 27 24 24 inches for 3 screens. Is this possible? Will it cause any problems? I can solve this without spending a lot of money by buying one 24 inch monitor.
Anyway to move the in game menus to a different screen either to the left or the right? I have a dashboard and it covers the menu options on the bottom.
Thanks for this. Anyone have issues enabling SMP? I have a 1080ti and if I enable SMP, my side screens go berserk if I set FOV higher than 147 and the max FOV it allows is 160
Hi, als neuling auf der Suche nach einer lösung bin ich gerade auf dein video gestoßen. Würde gerne auf tripple aufstocken, doch bevor ich 2 falsche Monitore kaufe wollte ich schauen ob es überhaupt möglich ist, bisher sieht es nicht so aus das ich 1x 49 und 2x 34 zoll für iracing zum laufen bekomme. Dein video ist nur für 3 identische monitore oder und mit der methode würde ich es für mich nicht hinbekommen oder für 1x 49 und 2x 34. Ach schade schon zu beginn des sim Hobbys gehts ja schonmal gut los, aber danke für dein video
Hi Dan/everyone. Dont you ever have troubles with Surround f*cking up the setup? Sometimes my surround forces my triples to be the same resolution as my Grid Porsche DDU, which is quite annoying. It would be nice with at alternative that does the same, but is more stable. Do you guys know of any? :-)
What I don’t have clear is if I go with irSidekickProfiles, do I steel need to do all steps before? Do I still go surround in Nvidia? Appreciate if someone can help. I updated my rig from 49” ultrawide curved, to triples and I’m really frustrated. Considering switching back to the ultrawide although I like the triples, the setup its just too complex and there is many conflicting information out there.
What is the reason or advantage for editing the text file to set the border, screen size and resolution? Is there any technical difference when I edit these values directly in the iracing menu? Because I do it in the menu, and get sometimes problems with the resolution or window mode (I am using Nvidia surround)
If you do the triple screens without the nVidia surround is it less stress on the video card itself...and if not, why not just use the nVidia surround?
if you can, always use surround. it's not more resource intensive, but some scenarios dont work with surround (streaming with capture card cloning for example)
Does anyone know how to help me with Iracing? I do everything correctly, it opens the three screens normally, but when it finishes loading it returns to a single screen, and the file returns to the original as if I were using a monitor
so all the procedure you show is to configure the triple screen without surround? for surround just go to the nvidia control panel and select from there then it does everything automatically without having to follow any of the steps you show in the video, right?
The reason is because some don't want too use Nvidia surround as it can be a nightmare also some like too play games on their middle screen and use the others for something else but that would mean you have to keep disabling and rre enabling surround this way Dan shows you means only iracing will start in triples
"Hallo Dan, ich habe alle deine Parameter für iRacing eingestellt, aber nur der linke und der zentrale Monitor funktionieren. Der rechte bleibt neutral und die Cockpitansicht ist komplett nach links verschoben. Ich habe einen G9 als zentralen Monitor und G7-Monitore an den Seiten, alle sind gebogen. Kannst du mir bitte helfen?"
Unterschiedliche auflösungen mischen geht nicht wirklich. was du machen kannst ist triple G9 auflösung rendern aber das schafft quasi kein PC ... ich würde einfach noch einen G7 für die Mitte kaufen, der G9 in der Mitte ergibt eh wenig Sinn weil dann die seitlichen Monitore einfach zu weit weg wandern und man künstlich das FOV verkleinert.
@@DanSuzuki Thank you Dan, but before this last season of iracing, I saw all 3 monitors, albeit different, perfectly. Not being an expert I got help from a guy (I don't know what happened to him anymore) and we ran your tutorial by entering your parameters correctly. Now I don't remember, but don't I have to and/or we increase some parameters to increase the 7680x1440? If that were the case, I wouldn't know how to do it. Anyway, thank you very much
Can I do these iracing settings without having to disable nvidia surround? I go back and forth between iracing and f1 23/24 and I hate the non nvidia surround look on the f1 games, gives me 4 tires in the front lol
Super Video, wie sieht es denn aus in der Mitte ein 49 Ultrawide und rechts und links je einen 27 Wqhd. Also 10240x1440.. Evtl kannst du mir da weiterhelfen.. Grüße
very sad that i have to be the guy who tells u that this is by far not everything i need to know about tripples, i need to know allot more, like what gpu one needs, and if tripples use 3times the gpu power or if it only renders ones and shows it on all 3monitors''???
i still don't get that ini file when i went into iracing, and I am using a 27inch for the front display and 2 24inch for each side. is there any other suggestions you might have?
@GusTavo-gx8nf yes and no. I found out that having 1 different size monitor isn't idea, but there is away to adjust the numbers to make it work. However you lose a bit of the main screen because you have to set it up using the 2 other screens settings. It is working for me but I am finding that having the other two doesn't actually help me much and I am considering going back to just 1 monitor. There is some information out there about setting up 2 different size monitors I just can't remember. It was on TH-cam though. Hope this helps a bit.
All depends on your budget and what you like + the space you have available for your rig. I'm on triple 32's with a 1000R Curve and that is just fantastic!
@@ethanbarford it still gives you 180° FOV without having to go super super close to the screens while still being very immersive. With the 55" I was using before the immersion was not as nice.
This is not all I need to know, not a single video out there explaining what monitors to buy, considering 99.9% of us start on a single monitor.... Most people have questions like do they have to be the same monitor, do they all have to be the same size, does VA vs IPS matter.... This is literally just information on how to setup. Here I'll go buy two 24" monitors to match up to my 34" Is that cool to do? My center is curved do my other monitors have to be curved? My center is 3440x1440 does ultra wide center matter? Does resolution of the 3 matter?
@@DanSuzuki so if people want to run triple monitors the only route is to buy 3 new monitors all the same size and resolution. That's pretty sad. Guess I won't be doing triples as I have a 500$ 34" 3440x1440. Pretty dumb to spend 1500$ on monitors LMFAO, I was hoping to buy two smaller monitors. That's dumb. Yea know for a paid subscription based game it sure likes to reside in the early 2000's for options
Yeah, unfortunately most simracing titles just are not up to modern standards :( you can trick 2 smaller monitors to work with your 34“ - but for that you need to actually render a triple 34“ image which can be very taxing since the sim can’t utilize modern hardware (another problem)
@@DanSuzuki so if I did that, the game would just over shoot the image and cut off the edges instead of scaling? I wouldn't have a huge issue with that. I do have a fully Watercooled 11900k and 3080 ti.
@@DanSuzuki really appreciate the help. Worst part is... I have a gigabyte curved 34" ultra wide I use for iracing and a gigabyte curved 32" I use for gaming. I could buy another 32" to match. But that seems so ridiculously overkill lol, and taxing like you said. I have a 24" MSI optix I could get another one of those but is that too small?
Wenn du das mal auf deutsch mach könntest, mein Englisch ist nicht so gut …. Genau sowas sucht man und findet nichts …. Außer auf englisch 🙈🙈🙈 Trotzdem sympathischer Typ 👍🏽
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Good video, you understand everything you tried to explain, unlike some other people who just say do this do that and they have no clue what those things do
Perfect timing! I've literally just this week upgraded my PC and also bought triple 27's.Fantastic video mate!
My friend how are you finding the triple 27's?
Coming from a single screen - game changing!@@aldo_0000
@@aldo_0000 just got a set of 27” and got them up and running today. seems like a really great size and looks good. i got 1080p looks good to me and i crush the 100 frames i set for them.
I only looked at small parts of the video - but I think 1 more detail is worth mentioning:
"Technically", you cannot freely "pick" the angle between your screens. They depend on the distance that you sit away from the screen.
For 32'' screens at 59-60cm, the optimal angle actually is 60°, which Dan has set up quite nicely for himself - it will also give you almost a full 180° FOV.
That's why 32'' are the "sweet spot" for triple setups: You can place them over your wheel hub, at an acceptable distance and get a full 180° FOV just by obeying "the math" :)
@Paderborner5212 the issue for some with that is the bezel free kit requires 50 degree angle and not everyone can get their screens the correct distance for that angle.
Don’t forget to include the ‘digital’ bezel. That’s where I came unstuck. It’s the black line at the edge of the screen. We were lied to about the thin bezels!
I need to sum up the all bezels or specify the bezels of each separately?
@@janiskornis6789 just each bezel include that digital black line as part of it
sorry for my incompetence but where do I find the "digital" bezel to include?
@@Dobermannvas Just the amount of ‘black’ bar that appears on the sides of the screen as part of the image. It’s digital, not physical.
Danke Dan, du bist genial!!✌
This was perfect! Thanks!!
Great stuff, thanks Dan!
This update is brilliant.
@Dan Suzuki Your a legend. I literally asked for this a week or two ago because your old video is out of date as the ini file looks different now.
Really appreciate it Dan thank you
Good video, especially because you do not, like many others, stick to the mathematical FOV, but also set it larger, and according to personal feeling :-)
Since I have Triples I fluctuate between a FOV of 190 to 200 degrees. If it gets too "weird", I push the virtual seat forward with "X".
What I miss are a few words about the "warping" that automatically appears with Triples if the eye level does not correspond exactly to a "Shift Horizon" of 0%. There are so many wrong formulas and information on the web about this....
Excellent video but I miss a POV from your eyes to view how the FOV change and view how you see the monitors, mayber recording with a phone could be enough, thanks. Great job, you have my like!
You can do it in seconds yourself. Just open a session. drive 200ft. stop the car and go back to the pits. Go into the replay and select cockpit view and pasue. Then open your graphics tab, select monitors and type in whatever ## you want in fov. Exit out of the graphics tab and back to the replay and it changes it instantly, you can fool around with it until you get it how you like it.
The one huge downside to surround for me - it (nvidia drivers?) would randomly reset the configuration and I would have to go in and set up surround again. This would happen at least once a week... "Oh, my displays are back to 3 independent screens.. I'll just go and configure surround again". Eventually I cracked it, and disabled surround, set up 3 displays, and iracing in bordleress window mode, and have never had an issue again (I really preferred surround though)
There's a program made by someone in the sim community called display magician
Just started using it and surround never loses settings and I swap between on and off with the click of a button
Thanks Dan, great video
Thanks Dan.
Thanks for the video Dan, really useful. Wondering about one thing, your 3|4 monitor are the same, are you ghosting or duplicating the center monitor?
What monitors are you using? Thanks for the guide!
my task bar are displayed on both left and right monitors but not in the middle. How can I hide them?
Thanks for the video. I have never been sure about iRsidekick. Do you just have to have the program open for iRacing to use it? Does it use the settings automatically if it is open?
Thanks for another awesome video. Quick question you think a 4080 gpu would be a worth upgrade over my 3090gpu?
thank you 😄
Nice vid, but for me nvidia surround and g-sync/freesync on enabled, middle monitor turns off for 1 second, cables are good 2k 240hz, and when i put bot via surround but via monitor dx file runs perfect. Issue i play rally games and i need to put nvidia surround for iR tripple setup via dxmonitor 11 file ( thats means not in surround mode) Dan have you enabled g-sync in surrond and also to check button below gsunc setting? You have to check it as only innthis ways freesync/gsync works.
Hey mate - have you got a full GSI Hyper P1 review/walkthrough?
Hi Dan, do you have any idea how to correctly setup triples (in iRacing and other sims) but with different aspect ratio screens ?
I have a 49" G9 as center screen (5120x1440) and 2 G5's on the sides (both 2560x1440). Totalling 10240x1440.
so far so good, i can get it up and running in a window spanned across the 3 screens.
But what i'm struggling with is that the "bend" where it thinks i goes from the middle screen to the side screen is offset to the wrong position. It is like the 10240x1440 is divided in 3 equal parts instead of Different parts.
You still have to run 15360x1440 to make this work
would you run I-racing settings as a single curved screen with a 103" total width? or run it as triples (they only have options for 3 curved or 3 flat- not 1 curved with 2 flat etc? I am currently running at 10240 x1440 with a -2560 offset in the Iracing monitorDLL- it looks good- but I feel like the side panels are a little off- curious on your input
@@DanSuzuki
Did it work? I have a 34'' with 2 27'' monitors
@@DanSuzuki
I run run the same. I would be interested to know what you ended up doing
@@kitmilo as Dan mentioned, running it at a resolution of 15360x1440 works for iracing. in Triple screen mode in iracing. Basically rendering too much, but this way you have a proper view, rather than having distortions in the wrong place. Works perfectly here.
Hi Dan, I had the triples set with your old video and it worked just fine. Now I am trying to set using this new video and I just cat get it right. I saw your video many times, step by step but it wont show the 3 monitors, just the center one. Am I missing something? Anyone that can help its appreciated. I have a 4060TI 3 1920x1080 27" monitors. Tks (It works fine with your directions for ACC)
in regards to using the modern FOV calculator thing at the start to set the dimensions - would this change if you were running curved? ideally the length end to end should be the same, but the angle between the monitors would be different no?
In theory ... yes, but the difference will be very negligible, I think the impact of your head moving while driving is probably bigger than the "errors" you get from curved screens :D
@@DanSuzuki it is a shame iRacing still has not included the 'angle' for 3-curved screens. It is negligible, but when I set curved for my middle screen, it does look better. Wish we could have it for all three.
3:00
Really great tip , by black boxes i think you mean overlays cause the in game blackboxes cant be moved right?
DriveUIFullScreen=1
Yeah talking about this box where you adjust brake bias, fuel, see the relative and other stuff
Which graphics card do I need to run a triple 24” 144hz on Iracing? Do you know if a 3060ti works fine on it ?
Hi Dan, I have a 34 inch Samsung g5 ultra wide 3440x1440. I am thinking of buying two 27 inch Samsung G5 2k monitors. Will these work as a triple with iracing? Do I just set my resolution to 3440+2560+2560?
Wath monitors are you rocking?
Dont look what he isnrocking just get KTC H32S17 !!! I got them ! 250 eur/pcs. VA panel no ghosting dark black amazing for the price, i like it even more than my asus PG279Q ips panel! And 1500R is perfect! I almost bought cheap LG 32" also was afraid of curvature 1500 as my friend SAMSUNG g7 240hz 1000R curvature was too much for me. It is perfect for simracing 1500R incant imagine better option! I did a big homework and glad i did! It was a lot videos reviews watched feom my side while accidently saw about this monitor, fantastic gem formsimracers -btw 165hz freesync gsyns compatible, no ghosting any shit, i'm very picky! Returned my pg279q two times till got model without bleeding;) enjoy sims guys ;)
MSI Optix 32“ - they are 1440p IPS flat panel 165hz
Can you link your Screens please? 😊
Hello Dan, I have 1 27 inch monitor and one 24 inch monitor. I have seen users using 27 24 24 inches for 3 screens. Is this possible? Will it cause any problems? I can solve this without spending a lot of money by buying one 24 inch monitor.
Anyway to move the in game menus to a different screen either to the left or the right? I have a dashboard and it covers the menu options on the bottom.
Thanks for this. Anyone have issues enabling SMP? I have a 1080ti and if I enable SMP, my side screens go berserk if I set FOV higher than 147 and the max FOV it allows is 160
Hi, als neuling auf der Suche nach einer lösung bin ich gerade auf dein video gestoßen.
Würde gerne auf tripple aufstocken, doch bevor ich 2 falsche Monitore kaufe wollte ich schauen ob es überhaupt möglich ist, bisher sieht es nicht so aus das ich 1x 49 und 2x 34 zoll für iracing zum laufen bekomme.
Dein video ist nur für 3 identische monitore oder und mit der methode würde ich es für mich nicht hinbekommen oder für 1x 49 und 2x 34.
Ach schade schon zu beginn des sim Hobbys gehts ja schonmal gut los, aber danke für dein video
Thank You , make another one for VR please :)
Hi Dan/everyone. Dont you ever have troubles with Surround f*cking up the setup? Sometimes my surround forces my triples to be the same resolution as my Grid Porsche DDU, which is quite annoying. It would be nice with at alternative that does the same, but is more stable. Do you guys know of any? :-)
Hey DAn. ive got this little bar where i can see windows at the bottum. where can i change taht in rendererDX11Monitor
What I don’t have clear is if I go with irSidekickProfiles, do I steel need to do all steps before? Do I still go surround in Nvidia? Appreciate if someone can help. I updated my rig from 49” ultrawide curved, to triples and I’m really frustrated. Considering switching back to the ultrawide although I like the triples, the setup its just too complex and there is many conflicting information out there.
What is the reason or advantage for editing the text file to set the border, screen size and resolution? Is there any technical difference when I edit these values directly in the iracing menu? Because I do it in the menu, and get sometimes problems with the resolution or window mode (I am using Nvidia surround)
mine randomly stoped working today.......ive tried all these settings and still nothings worked...its compressing all three of my monitors into 1
Monitor width , includes bezzels? So like 716 not 698?
Would like to see a triple setup guide for rennsport and dirt rally2. 😂
So is resize raccoon something that works WITH all this or replaces ? I’m so exhausted it’s been 3 days dealing with all this
If you do the triple screens without the nVidia surround is it less stress on the video card itself...and if not, why not just use the nVidia surround?
if you can, always use surround. it's not more resource intensive, but some scenarios dont work with surround (streaming with capture card cloning for example)
Does anyone know how to help me with Iracing? I do everything correctly, it opens the three screens normally, but when it finishes loading it returns to a single screen, and the file returns to the original as if I were using a monitor
Do you use nvidia surround?
so all the procedure you show is to configure the triple screen without surround? for surround just go to the nvidia control panel and select from there then it does everything automatically without having to follow any of the steps you show in the video, right?
It’s the same for surround or no surround on iRacing
The reason is because some don't want too use Nvidia surround as it can be a nightmare also some like too play games on their middle screen and use the others for something else but that would mean you have to keep disabling and rre enabling surround this way Dan shows you means only iracing will start in triples
"Hallo Dan, ich habe alle deine Parameter für iRacing eingestellt, aber nur der linke und der zentrale Monitor funktionieren. Der rechte bleibt neutral und die Cockpitansicht ist komplett nach links verschoben. Ich habe einen G9 als zentralen Monitor und G7-Monitore an den Seiten, alle sind gebogen. Kannst du mir bitte helfen?"
Unterschiedliche auflösungen mischen geht nicht wirklich. was du machen kannst ist triple G9 auflösung rendern aber das schafft quasi kein PC ... ich würde einfach noch einen G7 für die Mitte kaufen, der G9 in der Mitte ergibt eh wenig Sinn weil dann die seitlichen Monitore einfach zu weit weg wandern und man künstlich das FOV verkleinert.
@@DanSuzuki Thank you Dan, but before this last season of iracing, I saw all 3 monitors, albeit different, perfectly. Not being an expert I got help from a guy (I don't know what happened to him anymore) and we ran your tutorial by entering your parameters correctly.
Now I don't remember, but don't I have to and/or we increase some parameters to increase the 7680x1440? If that were the case, I wouldn't know how to do it. Anyway, thank you very much
@@Dobermannvas you need to render 15360x1440 and then offset it by -5120 if your center monitor is the main one.
@@DanSuzuki Hi Dan, Everything is ok now you can see them very well. Thank you very much for your availability.
Can I do these iracing settings without having to disable nvidia surround? I go back and forth between iracing and f1 23/24 and I hate the non nvidia surround look on the f1 games, gives me 4 tires in the front lol
Yes you can, exactly the same procedure as described here, only the offset most likely will be 0
Super Video, wie sieht es denn aus in der Mitte ein 49 Ultrawide und rechts und links je einen 27 Wqhd. Also 10240x1440..
Evtl kannst du mir da weiterhelfen..
Grüße
If i do it exactly like this and start a test session in iracing then it will still be on 1 monitor
very sad that i have to be the guy who tells u that this is by far not everything i need to know about tripples, i need to know allot more, like what gpu one needs, and if tripples use 3times the gpu power or if it only renders ones and shows it on all 3monitors''???
so would you say this new program is better to setup triples than just using srwe now?
no need for SRWE ... that's for ACC :)
@@DanSuzuki awesome thank you
i still don't get that ini file when i went into iracing, and I am using a 27inch for the front display and 2 24inch for each side. is there any other suggestions you might have?
Did you find a fix? I’m having the same issue
@GusTavo-gx8nf yes and no. I found out that having 1 different size monitor isn't idea, but there is away to adjust the numbers to make it work. However you lose a bit of the main screen because you have to set it up using the 2 other screens settings. It is working for me but I am finding that having the other two doesn't actually help me much and I am considering going back to just 1 monitor. There is some information out there about setting up 2 different size monitors I just can't remember. It was on TH-cam though. Hope this helps a bit.
It would be good an comparison between sorround and not soround. Because without sourround you have more fps
Not everyone have an 4090 😅
Is 27 inch triples too small? Many people recommend 32s
no I would say 27 inch triples are the sweet spot. 32 is really large
Looks like your running at 60hz; I don't know your monitors but I feel like you need to set your refresh rate higher.
No, in windowed borderless mode it ignores the ingame setting and uses the setting from windows - 165hz in my case 😊
Can someone tell me what graphiccard/cpu i Need to run tripples on iracing i have a pc with an 2060 and an 5600
No mention of resolution lol
And yes but very low graphics and other games won't run well
Why is your middle monitor shown as 3 & 4?
Cloned to the capture card 😅
i use a 32 triple and i am 55 cm away ... which fov would you choose? the calculator said 196 and the calculator from iracing said 165
Can i have central monitor as 1440p and side monitors as 1080p?
It’s depends on your graphic card
@@chemitaxis mine is 3060TI
@@evandrosantos8017 no you can’t do it with nvidia cards :(
@@chemitaxis Got it, thank you!
@@chemitaxis other question, do you know if 3060TI can handle triples 27" 1440p on iRacing?
what is the best triple screen size? some people say 27 and some say 32. im stuck lol
All depends on your budget and what you like + the space you have available for your rig. I'm on triple 32's with a 1000R Curve and that is just fantastic!
I prefer 32"
@@DanSuzuki thank you! Can i ask why please?
@@ethanbarford it still gives you 180° FOV without having to go super super close to the screens while still being very immersive. With the 55" I was using before the immersion was not as nice.
@@DanSuzuki ah okay thank you. So 32s are also better than 27s because 32s dont have to be directly behind the wheel?
Nice video! Does anything works for ACE COMBAT 7?
Gone to VR never gone back
Facts lol
stil does not work for me
Verstehe ich nicht ganz. Der FOV Calculater sagt 55 grad, der Triangle Calculater sagt 70 Grad. Und Du stellst 60 Grad in IRacing ein. Was jetzt? 😂
Einfach einstellen was dir am besten passt 😅
Kannst Du das mal auf Deutsch machen?😊😊
This is not all I need to know, not a single video out there explaining what monitors to buy, considering 99.9% of us start on a single monitor.... Most people have questions like do they have to be the same monitor, do they all have to be the same size, does VA vs IPS matter.... This is literally just information on how to setup.
Here I'll go buy two 24" monitors to match up to my 34"
Is that cool to do?
My center is curved do my other monitors have to be curved?
My center is 3440x1440 does ultra wide center matter?
Does resolution of the 3 matter?
They need to be the same size and resolution, otherwise you need to do some trickery that I wouldn’t recommend
@@DanSuzuki so if people want to run triple monitors the only route is to buy 3 new monitors all the same size and resolution. That's pretty sad.
Guess I won't be doing triples as I have a 500$ 34" 3440x1440.
Pretty dumb to spend 1500$ on monitors LMFAO, I was hoping to buy two smaller monitors.
That's dumb.
Yea know for a paid subscription based game it sure likes to reside in the early 2000's for options
Yeah, unfortunately most simracing titles just are not up to modern standards :( you can trick 2 smaller monitors to work with your 34“ - but for that you need to actually render a triple 34“ image which can be very taxing since the sim can’t utilize modern hardware (another problem)
@@DanSuzuki so if I did that, the game would just over shoot the image and cut off the edges instead of scaling? I wouldn't have a huge issue with that.
I do have a fully Watercooled 11900k and 3080 ti.
@@DanSuzuki really appreciate the help.
Worst part is... I have a gigabyte curved 34" ultra wide I use for iracing and a gigabyte curved 32" I use for gaming. I could buy another 32" to match. But that seems so ridiculously overkill lol, and taxing like you said.
I have a 24" MSI optix I could get another one of those but is that too small?
this dosent work.
It does, try again and follow the instructions closely 😄
Wenn du das mal auf deutsch mach könntest, mein Englisch ist nicht so gut ….
Genau sowas sucht man und findet nichts …. Außer auf englisch 🙈🙈🙈
Trotzdem sympathischer Typ 👍🏽
That's way too complicated! Ideally, the game should be smart enough to detect the resolution for each monitor and configure itself appropriately.
If you think this was a lot do not buy triples. It’s far worse than you think.
i cannot get this to work. I have tried the irsidekicks as well as the editing the ini files. nothing is working. why?