In this video I bring you guys along on the struggle I encounter in trying to rectify this 2008 BMW x5 where the trans would stay popping back into park
In a process of diagnosing similar problem, which also came from a body shop, where somebody attempted to do everything, beside the car being a piece of 'work'. Thank you for such a great work on research and diagnostics and making it available.
Wish i had your help. Used transmission install in a '10 x5 e70 and vehicle runs but no gear at all, no drive, no reverse, wont even go to neutral its just all park gear. Now, yes i can change valve bodies back to the original one, but isnt there some type of software to just reprogram this transmission to its new vin? Kind of like GMs SPS2/TDS system on acdelo? Or like fords IDS/FJD? Isnt there a software to program these like we would anything else?
Bro u dont know how much this video helped me. I was struggling trying to diagnose this same issue and I was stuck thinking it was a ews Isn issue because I also did the same thing you did with the spare valve body. I searched for hours on end watching TH-cam videos trying to find someone with the same problem and had an answer for cause/solution. Then I put it off for a few months and I decided to get back at it and then by the grace of God I found this video and I’m extremely grateful that I did. Thank you so much brother!!! 🙏🙏🙏👏👏👏
Super glad to hear this helped you out! Sounds like you had a hard time with yours, this one also was here for a long time before I even got to figure it out. Thank you for watching
Wha!!!! God made you for a purpose! Here is our client's problem: Client's 523i is disengaging into Park as in video when you release the brake pedal to drive off. Meanwhile, a scanner is showing actual gear is 1st Gear in any knob position.... In Neutral, car is trying to move forward, but laboring like you've stepped on the brakes....and the scanner can't access the Gear Selector Module..... We agree with you on the low ATF as someone changed the fluid after sump damage and we guess they nenver run engine when topping up! Will notify you accordingly 😊
Wow…..a really great job on this diag, Sadel. It reminded me when I pulled a Subaru H6 engine for a head gasket job. Subaru’s service info mentioned a special tool to hold the torque converter in place but I said “nah, I don’t need it.” Little did I know that the Subaru converter had three splines to seat (and of course the converter came off slightly when pulling the motor). It was a royal PAIN getting that final spline section to ‘sit’. I should have bought the special converter locking tool! I hope you and the family have a wonderful Christmas, brother.
hi i got BMW E 65 740 i 2007 160.000 km automatic transmission stuck car can not move any gear .Before that car hard shifting last transmission service do on 95.000 km .Bough valve body seal brand new filter ,oil replace also clean transmission valv with carby cleaner put back together .When start car not any lights on cluster ,but after 5 min car running come all light shift ,but no Parking and car not select any gear stuck can not move .What you things is problem .
Great find Sidel! I se that your experience and knowledge led you to find the problem. I've seen that kind of crappy work on cars before. I work with a guy that does it daily. Just cuz you think you can fix cars doesn't mean you should! Again, thanks for the video and teaching. Great job.
I m very impressed by the way you went about trouble shooting, first with error codes, then by process of elimination, then finally by looking at the history, and determining the cause by seeing the poor workmanship for the engine swap, and summizing that poor workmanship caused downstream damage. Fantastic job..
Thank you for sharing your knowledge with us. I appreciate your detailed explanations. Wishing you and your family a Happy, Healthy and Safe Holiday Season.
Excellent diag Sadel! Unfortunately, there are some techs that always cause problems every time they replaced something and most of the time are the so-called quick guys! Learning something different every time! Thank you for sharing brother!
I guess I’ll leave the bmws to the euro guys and stick to North American and Asian models. Too much struggle for nothing and the average owner of this very used European cars can’t even afford the upkeep just to say I drive a bmw or Mercedes and Audi.
That’s how you get directly to the root cause of a problem! Man this is still my daily struggle trying to diagnose everything in a shop ram by only me but with the help of your videos I’m learning a ton! Thank you!
Thanks Greg, and stick with it, keep learning and staying on top of information and put forth the effort and you will make yourself sought after when others won't be able to figure things out!
Great work! Question about the repair though, did you just swap out the front pump from the other transmission to replace the one that was damaged during engine install? Wouldn't you be worried about the metal shavings being in other parts of the transmission, causing future damage?? Thanks.
Any idea what's wrong with mine .. 2014 bmw 320i Says on dash not possible to shift out of park .. Lights on electric shifter don't even come on.. Transmission was going strong nothing with it i know that.. Was sitting for a year
it sounds like you might have a module not communicating, you will need to have it scanned completely and see if there is bus issues present, or at least get an idea of what codes there are.
Yes hello can pls help me bc my car seat for 2 yr with nothing wrong before I parked it and it will not go in gear it jumps back to park can u pls explain
I myself have only seen this once (which obviously is the video here in question) and it was caused by human error from incorrectly installing the engine they damaged the transmission oil pump. Otherwise I have never seen this. You could have similar issue though if for some reason the oil pump failed somehow, or the feed to the pump is bad or just simply not enough fluid in the system, because all this on mine had to do with a loss of fluid pressure and so the vehicle wouldn't get out of park
not in any of the data in the scanner I was using, not sure on actual oem , but hard to say since there is no actual pressure sensor inside the transmission
What if the engine or the transmission is still the same the car came with? Transmission oil not getting sucked up and exactly same deal as you have. Great video helps me find answers for my E70. Thank you
ACCOMPLISHED DTech Engineering My teacher DTech Engineering Thanks for sharing what you know with us .take care and have a great Evening with all your family around you 👍 SUBSTANTIAL DTECH Engineering From Nick Ayivor from London England UK 🇬🇧
Thank you so much for this wonderful video. I am 70 years old and I spend hours trying to find some good video tutorials because I have the same problem in my BMW 750 li . The engine and transmission are original . My question is : Did you think my car has the same issue? Thank you , and have a great time.
In a process of diagnosing similar problem, which also came from a body shop, where somebody attempted to do everything, beside the car being a piece of 'work'. Thank you for such a great work on research and diagnostics and making it available.
Wow like your technicality
Thank you brother. Great tutorial
Thank you Alexander, thank you for watching
Exelente
Wish i had your help. Used transmission install in a '10 x5 e70 and vehicle runs but no gear at all, no drive, no reverse, wont even go to neutral its just all park gear. Now, yes i can change valve bodies back to the original one, but isnt there some type of software to just reprogram this transmission to its new vin? Kind of like GMs SPS2/TDS system on acdelo? Or like fords IDS/FJD? Isnt there a software to program these like we would anything else?
The Autel IM608 can do it and some others out there, I have the Autel.
Bridge seal bmw put a piece of plastic in the transmission.
Bro u dont know how much this video helped me. I was struggling trying to diagnose this same issue and I was stuck thinking it was a ews Isn issue because I also did the same thing you did with the spare valve body. I searched for hours on end watching TH-cam videos trying to find someone with the same problem and had an answer for cause/solution. Then I put it off for a few months and I decided to get back at it and then by the grace of God I found this video and I’m extremely grateful that I did. Thank you so much brother!!! 🙏🙏🙏👏👏👏
Super glad to hear this helped you out! Sounds like you had a hard time with yours, this one also was here for a long time before I even got to figure it out. Thank you for watching
Reseat converter, fill with fluid and send it
Wha!!!! God made you for a purpose! Here is our client's problem: Client's 523i is disengaging into Park as in video when you release the brake pedal to drive off. Meanwhile, a scanner is showing actual gear is 1st Gear in any knob position.... In Neutral, car is trying to move forward, but laboring like you've stepped on the brakes....and the scanner can't access the Gear Selector Module.....
We agree with you on the low ATF as someone changed the fluid after sump damage and we guess they nenver run engine when topping up!
Will notify you accordingly 😊
Any updates?
Bonsoir,
Merci pour tes vidéos et, je te souhaite une bonne année 2023 à toi et ta famille 🎉😁👍
Wow…..a really great job on this diag, Sadel. It reminded me when I pulled a Subaru H6 engine for a head gasket job. Subaru’s service info mentioned a special tool to hold the torque converter in place but I said “nah, I don’t need it.” Little did I know that the Subaru converter had three splines to seat (and of course the converter came off slightly when pulling the motor). It was a royal PAIN getting that final spline section to ‘sit’. I should have bought the special converter locking tool!
I hope you and the family have a wonderful Christmas, brother.
Yes, situations like that can cause some serious damage as we saw here
Bad driver's door sensor can cause this too.
hi i got BMW E 65 740 i 2007 160.000 km automatic transmission stuck car can not move any gear .Before that car hard shifting last transmission service do on 95.000 km .Bough valve body seal brand new filter ,oil replace also clean transmission valv with carby cleaner put back together .When start car not any lights on cluster ,but after 5 min car running come all light shift ,but no Parking and car not select any gear stuck can not move .What you things is problem .
make sure the valvebody is correctly installed with the manual valve lever
@@DTEAuto thanks
Great find Sidel! I se that your experience and knowledge led you to find the problem. I've seen that kind of crappy work on cars before. I work with a guy that does it daily.
Just cuz you think you can fix cars doesn't mean you should!
Again, thanks for the video and teaching. Great job.
Yeah, I couldn't believe the amount of terrible work done on this one from the previous place.
I m very impressed by the way you went about trouble shooting, first with error codes, then by process of elimination, then finally by looking at the history, and determining the cause by seeing the poor workmanship for the engine swap, and summizing that poor workmanship caused downstream damage. Fantastic job..
Glad you enjoyed and thank you for watching
Thank you for sharing your knowledge with us. I appreciate your detailed explanations. Wishing you and your family a Happy, Healthy and Safe Holiday Season.
Thank you and happy holidays to you and your family as well, thank you for watching
Excellent diag Sadel! Unfortunately, there are some techs that always cause problems every time they replaced something and most of the time are the so-called quick guys! Learning something different every time! Thank you for sharing brother!
yeah this one was a hard one to figure out for sure, thank you for watching as always and glad you learned something
I guess I’ll leave the bmws to the euro guys and stick to North American and Asian models. Too much struggle for nothing and the average owner of this very used European cars can’t even afford the upkeep just to say I drive a bmw or Mercedes and Audi.
Wow what a great case study you had right there. Merry Christmas 🎄 and excellent as always.
Thank you, glad you enjoyed it and thank you for watching merry christmas
got the same problem, morning start got to warm it up for about 10 min,goes in park,work ok doing the day
That’s how you get directly to the root cause of a problem! Man this is still my daily struggle trying to diagnose everything in a shop ram by only me but with the help of your videos I’m learning a ton! Thank you!
Thanks Greg, and stick with it, keep learning and staying on top of information and put forth the effort and you will make yourself sought after when others won't be able to figure things out!
@@DTEAuto Will do brother! Looking forward to more content from you! Stay safe!
Well after I see you working I should send my car to the junk yard thanks for it
Great work! Question about the repair though, did you just swap out the front pump from the other transmission to replace the one that was damaged during engine install? Wouldn't you be worried about the metal shavings being in other parts of the transmission, causing future damage?? Thanks.
yes it can be a worry, but it was worth a try for me
Thanks this was really helpful
Glad to hear!
Saludos desde paraguay bendiciones hermano feliz navidad
thanks man for sharing thumps up
Thanks for the visit
Nice diag! No codes, no obvious data for direction. Euro. Tough one there brother, but you nailed it with some perseverance! Nice!!
Thanks Jeremy, this definitely was a tough one to figure out, but with some luck and persistence I got it, thank you for watching
hey Baldo. thanks for the video👍
Any idea what's wrong with mine ..
2014 bmw 320i
Says on dash not possible to shift out of park ..
Lights on electric shifter don't even come on..
Transmission was going strong nothing with it i know that..
Was sitting for a year
it sounds like you might have a module not communicating, you will need to have it scanned completely and see if there is bus issues present, or at least get an idea of what codes there are.
Yes hello can pls help me bc my car seat for 2 yr with nothing wrong before I parked it and it will not go in gear it jumps back to park can u pls explain
So what did you actually do to finally fix it same problem with my 2010 550 I love the car don’t want to get rid of it
Removed transmission and replaced the oil pump in the transmission
@@DTEAuto what’s the chances of it being the same thing with mine ? Slim or I won’t know til I try everything
I myself have only seen this once (which obviously is the video here in question) and it was caused by human error from incorrectly installing the engine they damaged the transmission oil pump. Otherwise I have never seen this. You could have similar issue though if for some reason the oil pump failed somehow, or the feed to the pump is bad or just simply not enough fluid in the system, because all this on mine had to do with a loss of fluid pressure and so the vehicle wouldn't get out of park
Thank you Sidel. Good job again. Merry Christmas to you and your family.
Merry Christmas to you too Billy and thank you for watching
Very good information sir ji
Isn't there a pid for tranny oil pressure..thanks..?
not in any of the data in the scanner I was using, not sure on actual oem , but hard to say since there is no actual pressure sensor inside the transmission
this is awesome
Great, thank you 👍👍
Awesome
زbravoooo
Is the transmission 6hp21 or 26 !?
Think it was a 26, but either one would be set up and work the same
Thank you. This will help a lot of shops.
Yes hopefully does, thank you for watching
What if the engine or the transmission is still the same the car came with? Transmission oil not getting sucked up and exactly same deal as you have.
Great video helps me find answers for my E70. Thank you
I would drop the transmission pan and inspect for metal debri, the only way for the fluid to not be sucked up is if the pump not working or blocked
ACCOMPLISHED DTech Engineering
My teacher DTech Engineering
Thanks for sharing what you know with us .take care and have a great Evening with all your family around you 👍
SUBSTANTIAL DTECH Engineering
From Nick Ayivor from London England UK 🇬🇧
Hi sadel. Nice video. Learnt a whole lot. Could you be nice to shoot me your personal email.
thank you for watching, and you can reach out to me at dteauto@gmail.com
Thank you so much for this wonderful video. I am 70 years old and I spend hours trying to find some good video tutorials because I have the same problem in my BMW 750 li . The engine and transmission are original . My question is : Did you think my car has the same issue? Thank you , and have a great time.