Nissan Timing Chain (engine almost blows)
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2017
- We hope this video will help you get your truck back on the road asap.
Nissan Snapped Timing Chain Group: / 323858497946272
Our Facebook Page: / westyorkshireengine
Please contact us on 01274 640028 for more enquiries
![กินอาหาร ถูก vs แพง!! จานละ 500,000 vs จานละ 50!! [Ver. 2024]](http://i.ytimg.com/vi/FF_HppKg4vs/mqdefault.jpg)
You are a credit to your industry mate. The fact you take the time to make these videos is a testament to your professionalism, as you surely aren't making any money from these vids. If anything you are doing yourself out of work by teaching people minor, DIY fixes that you could be charging for. Just wanted to thank you. If I ever have an issue with my Navara you would be my go to mechanic - and I live in Merseyside...
We're a family run business, we know how frustrating it could be for people on a simple fix but can cost them due to people not knowing what it is and it gives us great pleasure to do these videos for people like you. Many thanks for your comment, that's what it makes worth while.
Thanks, Des.
West yorkshire engine services Can you help me please i have a nissan pathfinder 2005 diesel yd25 and is overheating over load, driving normaly is good, i change the water pump the thermostat and clean inside the radiator i remove the top cover of the radiator and clean the radiator lines inside but the las owner was using water and i change to coolant after change the parts, i have a new fan clutch
West yorkshire engine services you guys are awesome keep up the good work👍👍
Thanks so much for your post, We will always do all we can to help everyone around the world to help save time and money in repairs. Des
Thanks William
You are the only legitimate Nissan Mechanic I know and you're way over there in Great Britain! Cheers from Augusta, GA. - Usa
Hi DooDadd Didit hope are channel will help you one day Many Thanks Des
Dude I’m stunned my old man has a 2012 navara from new I never new anything about this timing chain issue and he’s got 140k km on that chain I’m guessing it’ll be upgraded in the next few days after seeing this and others you have on this problem
Cheers
You sir are an exceptional man doing a great service to the poor people that have the misfortune of owning a Nissan Navara D40.
For the rest of us, you have provided all the information we need to never buy a modern Nissan Diesel.... Toyota all the way!
Many Thanks Hugh
Toyota have there own problems
Hugh Jazz .
Gday there, great and informative videos. I have a 2011 d40 manual which so far hasnt missed a beat and has 200,000kms on it. Im from Australia. I havnt done any towing with it pretty much since ive owned it at 93,000kms but exhaust temp sensor has gone twice but ive driven it for ages with the fault and only had a couple of instances where it felt like it had no boost, this was 40,000kms ago roughly.
Ive been lucky so far but am looking to put it up for sale before any major issues (timing chain) occur. Also thanks for info about np300s chain, thats a bit off putting knowing its probably gonna be no good if ya plan on towing alot with it.. Thanks again for all your info
Gday COBBA CrouchOz here from Australia mate lol
I am buying a 2007 TI turbo diesel it’s been serviced well
And I have checked the noise for the chain seems good
And no pink SMOD in the waters either phew
Has 256000 on clock and I’m doing the bottom radiator move of the pipes
To cut out that problem
Anything else I should do to make sure it runs well
Thank you 🙏 for your unbelievable service to the mechanic industry
You are a LEGEND as I have watched heaps of your vids to see what needs to be done
And have subscribed also
Cheers 🍻 from Oz the land down under sport lol
CrouchOz
An issue around the world is right, nissan will not come to the party, im GLAD you are becomming well known around the world, you are hear in Australia.
Excellent videos very informative. Ive justed bought a used 2009 D40 (190K on the clock) from an auction, but dont have any history of repairs that may have been performed. Just wondering on how (easiest way) to check whether the timing chain has been replaced or upgraded.
thanks for all the info, ive just bought a d40, it sounds a little bit like some of the cars in your videos,
im just wondering if i unplug the cam sensor and try and start the car, will it throw a code and go into limp mode?
thanks
Thanks for this video it has made a lot off sense I’ve got a kit but it’s all I have and afford .
where are yers located in yorkshire as i'm heading to halifax on the 9th of sep with my pathy and just to thankyou on helping me keeping it on the road
I've got the Navara 2010, sometimes it sounds like that one. I've also resorted to heat starts on occasions :(
Hi mate ,I have a problem with my Nissan Navara d40 1999 model turbo diesel.At 2000 revs blows blue smoke and wont let the revs go up,any ideas
Do you know were i can get a fuel tank for my navara d22 mark2
thanks alot
how to tell when that timing chain needs replacing in terms of mileage???
Does the timing chain issue the same for the. V6 thank you
Hi I am planning to purchase the Nissan terra 2019 here in the Philippines engine is YD25Ddti is this reliable and will it last a longer period of time?
Am really having a challenge listening to several of your videos. The sound is either poor due to echo or the volume is low.
How about vibration if the engine is idle ,what some problem causes vibration
i have a simler nose on a zd30 3.0 after replaceing the head cam ect
It’s a boost control solenoid
The new np 300 is mercadies based engine and running gear so I've been told by a Nissan sales man last week. So I think they are going to fail massively
Nissan Australia has taught all their Dealerships how to handle this problem.
As all of them use the exact same fix.
When you walk in and explain what is wrong or what your D40 is doing, they will all say "This is the first time we have ever seen this problem"
Really well said people who sell this motor will never admit to common failures. That is why we share what we see every day to all
You are amazing🎉
Our chain was replaced 6 months ago due to snapping…..
But now it broke again!!!!
Is it normal or some kind of bad mechanic skills?
We live in Denmark, and no one knows anything about this care😢
bad kit
@@westyorkshireengineservice9160 should they not have more then 6 months of warranty, the shop say that it is out of there hands when it has ben over 6 months..... damn i wish we never got that piece of shit! in December it also brok in half🤦🏼
in 1,5-2 years the chain broke twice and the car also broke in half😭
we don't even know if it is fixable this time!
i seriously dont understand why a car brand like Nissan can't see they fucked it up, and just admit that these cars are worth nothing!
thanks for all your help (in all your other videos also)
Hi.. Iv watched a lot of your videos and just wanted to say thanks... My question to you is im thinking of buying a Nissan Navara 2.5 diesel but after watching ur videos its putting me off the car a bit... Are theses Nissans reliable..? Because they seem quite problematic according to your videos...?
Hi
My Navara d40 2011 keeps cutting out going into limp mode when it does I lose all revs I stop turn ignition off restart and off I go now this can last all day or a week if lucky then there’s days it just. Cuts out all day long Iv changed the suction control valve from Nissan it was ok for around 3 weeks then it all started again any ideas please
Cheers
Alan
Suction control valve
Hi my turbo sounds like a siren at low and middle rpm its only doing 60,000km any advice no power lost and runs great...D40 navara
renaldoracing renaldo that is by the air filter when is dirt Long time the spinning of the turbo stay trying to be not in the center so you have to replace the turbo
thank u for taking the time to reply and for the advice
Good evening, I'm from Romania and I have a Nissan Navara D40. It covered 260,000 km and I don't know if the distribution chain needs to be changed. If so, recommend me a link where to buy everything you need to change the distribution. If you were closer I would come to you. Thank you in advance!!!
Call me on 01274640028
I have a 07 frontier that sounds the same but only after it gets to operating temp. Is It the timing chain guides ?
ruel ruel on this video it was the chains
Mines only happens when hot. What do you think?
ruel ruel yours could be injectors if you could email at westyorkshireengines@gmail.com and then we can look into it more
I have an Almera 2004 and recently had an Engine Management code appear. When I read it on my reader it was a Camshaft Sensor. When starting in the morning, it starts up no problem but the rev meter kinda bounces a few seconds before it settles down and it drives fine. Is this the early signs of a stretched chain?
If it’s not the sensor it may indicate your timing is at fault
@@westyorkshireengineservice9160 thanks for the reply mate! Yeah I have my doubts it's the sensor so I will most likely get the chain done next week to at least prolong the life of the car!
عزيز ارجوا المساعده، امتلك نيسان اكستيرا موديل 2007، اشكوا من ضعف الانطلاقه ليست مثل السابق وكذلك يوجد اهتزاز بسيط في المحرك، احس في الاهتزاز بشكل كبير عند القياده لمسافات طويله اثناء الوقف التام ، تم استبدال الفيول بامب، وكذلك تم تركيب بلج جديد ، وكذلك تم تركيب كويلات جديده، وتم تنظيف الثروتل،واخذت علبه تنظيف الانجكترات التى تخلط مع البترول، الى الان لم اجد الحل لهذي المشكله
I had the same problem with my 2014 Juke SL manufactured on November 29,2013. yet Nissan Canada looks at it as a 2014 model. Not covered under the Voluntary Recall Campaign P-4213 that covers all Juke models 2011 to 2013, Service Bulletin SB-10055923-4231, Valid from Sept. 22,2014 to Oct. 30,2015. Yet the problem of timing chain stretching wasn't discovered until May 5,2014. So I had to pay $2,440. out of my own pocket for the repairs. So why was my Juke not covered? Nissan has a problem with Model and Manufacturing dating!!!!
Cant they just clone you and distribute you around the world accordingly...I'm telling you, the Nissan mechanics in Brooklyn are clueless!
Many thanks for that
Rough cost of changing chain on d40 please?
475 pound ,I just checked for my D40
Hi I have a 2007 Nissan navara when driving it goes into limp mode and the engine light comes on when under load. Changed fuel filter still happens ...any ideas??? Thanks
It needs to be plugged in then back to me with the fault code, Cheers Des.
SJ04 ZHW - Carry out fault diagnosis for limp mode issue. Fuel Pressure fault code stored - FRP Relief P1272 stored. Replaced fuel filter but fault still present. Further diagnosis needs carrying out
You need to use Live Data to be sure. cheers Des
Is it worth changing valve on pump
Don't regular oil changes extend the life of the chain?
No
Hello Master! I'm Gaben from Hungary, unfortunately I would be far away from you anyway. I'd like to ask you what I thought could have ruined you. I am after replacing the Nissan Navara D40 timing chain. I replaced the air filter, engine oil, water pump, air mass gauge, camshaft and crankshaft encoder, dual weight flywheel, clutch and as I wrote a complete timing chain kit. After the start, however, he has a very clicking rattle. The chain seems to click on some plastic part. The performance is good, at least as far as I dared to try, because it is disturbed by the loud noise at idle. Thank you in advance for your honor. Gaben from Hungary.
If you have had replaced the cylinder head I would have said you have put too much RTV on the back timing plate and covered the oil hole And why did you change the cam sensor and crank sensor that would suggest timing out or maybe something has not been tightened properly All the very best Des 😊
@@westyorkshireengineservice9160
The crankshaft encoder was faulty there was no turn and it was thrown as a fault. The top is because I bought two and what I took out remains in reserve. In principle, I did everything according to the description and the video. Works start going just confusingly rattle. I'll try to break it down again and review it again. Thank you for your honorable reply. All the best Gaben.
Gaben Gaben you can send me a video of the noise if that helps westyorkshireengines@gmail.com
Never seen a Nissan diesel truck like that in the United States.
sir i have navara d40 2006 sudenly it made a sound like tırrr and i stop the engine still runs but the same noıse and hard to start cun you help
Could be your timing chain.
yes its true the timing chain tenshener is broken and there is 6 of valves bend now what do you prefer to do
You can do the job in the motor but if you are thinking of changing the clutch take the engine out.
Bet you aint seen a 2015-2020 2.3dci chain snap. It's Renault built, not known to snap. Can become noisy, streched with mileage and poor servicing that's all 😉. Built in Barcelona, shame they're closing the next ones will probably come from Asia or America.
gunnermike76 sadly yes we have they are also in the 2014 pathfinder
@@westyorkshireengineservice9160 the 2.3 dci (M9T code for Renault) was introduced only on the latest Navara. So Pathfinder still the old noisy YD engine 😱
I didn't know they had timing chain issues
Thanks for watching they have many problems check out my other videos before buying one all the best Des
@westyorkshireengineservice9160 was thinking about buying 2010 5.6 now I'm scared to think I keep my toyota camry
@@rayhofmeister6693 well said haha
I hate to point it out but that "boost sensor " is actually an n75 valve or vgt vacuum control solenoid..
Boost sensor is a vague description and shouldnt be used by professionals.
Jedi
i meant d22,too stressed!!!!
Nissan is selling junk engines in the third world.
maximize the profits at the exp of customers.
North America Nissan trucks should be sold around the world enough with those crude diesel 4 cyl engines. they may save some fuel but at the cost of reliability,
The so called boost sensor that you pick up 53 seconds in IS NOT a boost sensor, IT IS a three port solenoid valve, NOT a sensor at all and thie is NOT what a boost sensor looks like!!!