Sadly the owner is super strict & doesn't want any pictures or filming done. Probs cause he has like over 4mil USD in super rare BMW's on his lot. I tried talking to him a year or so ago... :(
Just as a heads up, Flash should never corrupt in normal operation, if that is the case, you probably have a routine that is not monitoring the power rail before undergoing a write or erase procedure Under extreme conditions (space) or very rarely, may you see a bit flip occur as an affect of x-ray.
See that yellow thunder in the upper right corner? That's voltage brownout. Also, disable swapping if you want the SD card to last. they're not built to constantly move data.
@@FerdinandReisch 10 mil at best. Lower end cards will have something closer to 1mil. Wear leveling is very limited without sacrificing bandwidth (which in itself is very limited for SD cards) therefore we can't assume that cycles will be spread out evenly, meaning you will have much, much less capacity on individual transistors. The problem with swapping is that they often result in rewriting the same blocks over and over until they die. Dumping tons of logs can be troublesome too but much less so than swaps. This of course is a lesser issue with newer gen raspberries with 2GB or more in RAM, but during the time I used to play with them we had a gig or less shared with video data. The most common reason of corruption of course is sudden power outage. The display used in the video is one of the official pi touchscreens and costs less than 100 bucks.
@@TheChrisey Interesting, tbh I havent played around with Pis a lot, just basing it off embedded development. But now that you explain it, shared memory would be hard on the SD card. When you say bandwidth is limited when performing wear leveling, do you mean this in the sense of having delays in writing when completing a full sector? Agreed, loss of power during write/erase, but in the case where you have a battery constantly connected... this should really only be an issue when replacing the battery, and thus shouldnt occur often. They either lack a good power supply that can maintain supply during cranking etc, or they dont have a good power saving mode when the ACC is not switched.
Does it display fault codes and everything like OEM? Would like to update my 04 gallardo with digital dash. Just diving in and learning about it. Thanks for posting
Nice to know you geek out on linux and hardware. I do too (programmer by profession)! I was thinking about building something like this for my Honda. Think I should try?
Really surprising to hear that they were just cutting the power, not using a UPS with shutdown. Do you know if their board for the Pi will be available separately?
Are you able to do a tutorial on how to customise or import images and such for the powertechs. I just purchased one for my r33 and would like the info
Hey Sammit, I was wondering if you had any photos of the main circuit boards. I have an 8” touch display in my S13 and I wanted to see if I can use my screen with that setup or if I’d have to use their complete setup. Rather not spend $600 on it just to find out I can’t get it to work
Low or underpowered power warning .. top right lighting icon showing... Plug in another power source 5 volts with 2 amps or better and it will not slow down..
Just ordered the street dash one last week 😁 could we look at a constant power to the display and use keyed power steped down to 5v as the trigger for on and off ?
Haha that was sick! I would love a digital dash like that for my SR20 S13 vert. So excited to have a RHD car here in Florida! It runs rich though - what tuning SW/HW do u recommend me using to correct the AFRs? Cheers!
Hey, I wanna do the same.thing in my.a4 b6, is it possible to get your email or a way to.get a more indepeth explanation of the design of the cluster from a software aspect
Hey @sammit! I love geeking out too. Anyway, you could use a UPS hat to prevent abrupt power cut to the RPi when you turn off the ignition and let it shut down normally. Something like this: my.cytron.io/p-ups-power-hat-for-raspberry-pi Btw, wats the software used? And is that the official RPi display, is it readable under the sunlight? And do you use a physical cable to connect to your ECU/OBD port?
I guess the mrs gave you an ultimatum grow a stache like LZ or she leaves. personally I would let her leave the fact she can openly say the things she does about adam shows she doesn't have respect for your feelings whatever way you look at I wouldn't disrespect my mrs like that in any way joking or not 🤷♀️
Hi Sammit! What is a CAS? What is a trigger kit? You repeat these things over and over, but you don't explain. I have no idea what your talking about. This is a noob TH-cam mistake.
Shane Black Lord cas is a short for Cam Angle Sensor and a trigger kit measures the cam signal way more advanced and precise compared to the oem cas if I’m correct
Amir 020 Hi Amir! Thanks for the explanation, I really appreciate it. I hate when people use terms without explaining what it is. Other TH-cam channels for out of their way not to make this mistake. They even state the reasons for not doing this, repeatedly. I guess some people don't appreciate what it was like when they first started and didn't know what these terms meant. It also does help to say things like he explained it in an earlier video. Really? Which video, when? Why not just say cam angle sensor?
I really admire your videos, they help with my anxiety and make life just that little bit easier man. Thank you ❤️
What the hell sam you didnt show us that sick bmw at 4:22
i dont think he knows thats a rare E30 M3 lmao
sammit if you read this, please show us that garage at 4:20 😍
Yeah I was about to comment that. I want to see that E30
Sadly the owner is super strict & doesn't want any pictures or filming done. Probs cause he has like over 4mil USD in super rare BMW's on his lot. I tried talking to him a year or so ago... :(
oh thats kinda sad, thank you for replying tho
Just as a heads up, Flash should never corrupt in normal operation, if that is the case, you probably have a routine that is not monitoring the power rail before undergoing a write or erase procedure
Under extreme conditions (space) or very rarely, may you see a bit flip occur as an affect of x-ray.
Can you do a tutorial on how to upload a custom image or video to the dash and how to set an image as the background?
I bet Mrs. Sammit loves the LZ look now lol
Only teasing bro. loved the last bit of the vid 🤙😇🤙
I really appreciate this kind of stuff cause I see a bit of how it works
Can’t wait for my stickers to arrive. Arigato my friend!
See that yellow thunder in the upper right corner? That's voltage brownout. Also, disable swapping if you want the SD card to last. they're not built to constantly move data.
10 million erase or write operations surely. But yeah, if we're talking updating everyone 10ms... Your lifespan is limited.
@@FerdinandReisch 10 mil at best. Lower end cards will have something closer to 1mil. Wear leveling is very limited without sacrificing bandwidth (which in itself is very limited for SD cards) therefore we can't assume that cycles will be spread out evenly, meaning you will have much, much less capacity on individual transistors. The problem with swapping is that they often result in rewriting the same blocks over and over until they die. Dumping tons of logs can be troublesome too but much less so than swaps. This of course is a lesser issue with newer gen raspberries with 2GB or more in RAM, but during the time I used to play with them we had a gig or less shared with video data. The most common reason of corruption of course is sudden power outage. The display used in the video is one of the official pi touchscreens and costs less than 100 bucks.
@@TheChrisey Interesting, tbh I havent played around with Pis a lot, just basing it off embedded development. But now that you explain it, shared memory would be hard on the SD card.
When you say bandwidth is limited when performing wear leveling, do you mean this in the sense of having delays in writing when completing a full sector?
Agreed, loss of power during write/erase, but in the case where you have a battery constantly connected... this should really only be an issue when replacing the battery, and thus shouldnt occur often. They either lack a good power supply that can maintain supply during cranking etc, or they dont have a good power saving mode when the ACC is not switched.
Found this by mistake in 2023, never would’ve imagined of seeing you with mustaches 🤣
That was very cool I’d like more geeking out videos
Capacitor for power, use ignition power to a input to command shutdown. One power source and never need to replace battery.
Saw the discord notification and clicked in to your TH-cam.🙃
I love this kind of content. Interesting looking at the VE table compared to my cars own
I love those Yashio Factory and Okachan logos.
Yessss Sam awesome video dude!!!
I like learning about this stuff Sam thanks.
Shipstation is great for all shipping needs, especially international packages that require a declaration. Rates are great as well! Cheers!
The customization on that dash is crazy
What a cool ass dash after you made it your own.
Could you post a link for the digital dashes?
If i had all the hardware, can i get the software to run the dash?
BEST VIDEO TITLE EVER IN EXISTANCE!
😍 omg dash look so cool !
I’d buy that dash only if it came preloaded with those Sammit, yf logos lol
love it mate keep it up
Deffo go to a trigger kit, much better than a CAS. any 2nd hand unit you get will just be worn out as your stock one. Lots of options for trigger kits
verry nice i will be needing your help wen im installing mine on skyline r33 gtst
Does it display fault codes and everything like OEM? Would like to update my 04 gallardo with digital dash. Just diving in and learning about it. Thanks for posting
Nice to know you geek out on linux and hardware. I do too (programmer by profession)! I was thinking about building something like this for my Honda. Think I should try?
Awesome video mate I’ve just picked up a dash and wondering how to put the pictures on like u did ?
Really surprising to hear that they were just cutting the power, not using a UPS with shutdown. Do you know if their board for the Pi will be available separately?
How did you get it to work on your desk? Does it come with some adapters or something? I'm about to order one.
Are you able to do a tutorial on how to customise or import images and such for the powertechs. I just purchased one for my r33 and would like the info
Dope videos always!
Hey Sammit, I was wondering if you had any photos of the main circuit boards. I have an 8” touch display in my S13 and I wanted to see if I can use my screen with that setup or if I’d have to use their complete setup. Rather not spend $600 on it just to find out I can’t get it to work
Don't go another stock cas, Check out the nz wiring trigger kit. Is compatible with link g4+
Sammit when are you put one of those digital dashes in your s15?
Low or underpowered power warning .. top right lighting icon showing... Plug in another power source 5 volts with 2 amps or better and it will not slow down..
Just ordered the street dash one last week 😁 could we look at a constant power to the display and use keyed power steped down to 5v as the trigger for on and off ?
Haha that was sick! I would love a digital dash like that for my SR20 S13 vert. So excited to have a RHD car here in Florida! It runs rich though - what tuning SW/HW do u recommend me using to correct the AFRs? Cheers!
kanyedian depends on the car, like if you have a honda, hondata, but hp is solid too
ooof im gonna buy this dash.
Hey Sam. You think I’ll be able to run this on my gc8?
What’s the link for the Dash shop?
4:25....again. No E30 M3 love. Where or what was that place?
gorillahunter I am interesting in that BMW E30
SORRY DUKE DENNIS JUST WON THAT TITLE, he got this naurto one😰 when the car starts up its mad cool
...must have diggy dash cluster
#goals
Get a trigger kit Sam. Be worth it in the end
Hey grab a nz wiring cam trigger kit from bew zealand there great bolt on plug in and solid timing work great with link ecu
Sadly they don't ship to Japan :(
I can sort it ..im good mates with geoff at nz wiring .. there good 400nzd
DRFTON00 chat to them for me! Would be sick to work with them :)
Hey .. geoff is sending 5 trigger kit to AUTO SELECT in japan is that close to you or i can post 1 direct to you :)
If I can get one direct that would be epic
nice Lz stache
What dash is that I’m looking to get one for my car
Not my kind of jazz AT ALL. but watching you I wish I new more about all that stuff.
I wonder what Oka-chan thinks of that dash now :D. I also find Linux related stuff interesting.
Where do you find this
Hey,
I wanna do the same.thing in my.a4 b6, is it possible to get your email or a way to.get a more indepeth explanation of the design of the cluster from a software aspect
Is your car tuned with VE or traditional?
The skyline is so healthy I assume you are gonna build the motor and go for big power.
Rb30det next year in the r33 from otaku for sure
What are the purple gauges ?
Can my toyota vitz rs use this digital dash?
where do I get that dash from I like wish I had one
What app is the one for the gauge?
9:43 Biggest fucking tease ever
Good content can u do another digital dash giveaway soon with that same features u did to ur digital dash
I think the last one was one the sponsor gave him.
Man I’m so keen to put a ZacBaldy Logo on your dash when I’m over 😉😂
Add it to the row of stickers in the back window
Andrew Cox day no more 😉
@@ZacBaldy how about both? Give him a bunch to cover up drift damage aswell
will it work with spit tronics ecu
Hey @sammit!
I love geeking out too. Anyway, you could use a UPS hat to prevent abrupt power cut to the RPi when you turn off the ignition and let it shut down normally. Something like this: my.cytron.io/p-ups-power-hat-for-raspberry-pi
Btw, wats the software used? And is that the official RPi display, is it readable under the sunlight? And do you use a physical cable to connect to your ECU/OBD port?
Bruh, your stash... it looks like you have a couple of pubs glued to your upper lip.
Where download that dash?
how's about red rx7 fc
I dunno, mines simple cheap and easy, $30, but, maybe less on the cosmetic side 🤔
GEEK xd
When tf did Professor Lupin get into cars?
Oh I know whats goin on next year.
Why 10degrees and not 15degrees?
Did anyone see that e30 by the post office
Spoiler alert. New engine next year in skyline is a electric motor😉😂
Sammit, your 1980's porno mustache adds character!
Wtf sammit with the stache looks weird lol
Skyline is red
S15 is not blue
however, it goes
brrrap stututu
You look weird with that beard you look like will ferrell on the movie anchorman 1
i kinda cringe when you try do an american accent
I guess the mrs gave you an ultimatum grow a stache like LZ or she leaves.
personally I would let her leave the fact she can openly say the things she does about adam shows she doesn't have respect for your feelings whatever way you look at I wouldn't disrespect my mrs like that in any way joking or not 🤷♀️
Lz came in her mouth
No best digital dash 😄
Nice 1st
666 views lol
Fishing for likes
Hi Sammit! What is a CAS? What is a trigger kit? You repeat these things over and over, but you don't explain. I have no idea what your talking about. This is a noob TH-cam mistake.
Shane Black Lord cas is a short for Cam Angle Sensor and a trigger kit measures the cam signal way more advanced and precise compared to the oem cas if I’m correct
He has explained it in previous videos
Glad you asked because i also had no clue. And i been working on cars forever now. But once they said what it is i am familliar with it
@@tjramsey7274 what kind of cars do you work on?
Amir 020 Hi Amir! Thanks for the explanation, I really appreciate it. I hate when people use terms without explaining what it is. Other TH-cam channels for out of their way not to make this mistake. They even state the reasons for not doing this, repeatedly. I guess some people don't appreciate what it was like when they first started and didn't know what these terms meant. It also does help to say things like he explained it in an earlier video. Really? Which video, when? Why not just say cam angle sensor?
WTF?
OK. that thing is cool. I would need it to have that "Built In" install for my taste but simply Bad-Ass. =oD