I wish the media guys would take the time to put episodes in order in the playlist folder! It would help keeping track through the episodes so much better
this is my favorite build of all time, the 300zx is my child hood dream car, I anxiously wait for every espisode running the fuel tubes parallel looks way better, if there was a nice billet tube clamp/holder than ran them parallel, would like sick lastly when this build is complete I would love to buy everyone lunch and see the car in person. ❤
Agreed, but perhaps remove 1” from the length of the line so it lays a bit more in unison to shape of the fuel hose? I agree with camera man, it’s a tad too long
trick of the trade for hoses that are tight... use a heat gun and warm up the hose and use isopropyl alcohol and goes right on and the iso evaps, boom done! Works really good with push lock/ instagrip hose.
WHats good Throtl, huge fan since I stumbled upon your content. I have a car for you guys to restore next. 2006 Subaru Legacy GT SpecB. Sleeper car. Your grown up STi. Give it a look. You will blow the car community away with that build.
Throtl VIP squad good morning Quinn Rickie Mickey, Evan, Rick , Victor Shawn Will Nate Tim Big Jeff and the rest of the team awesome custom mounting a radium fuel cell into 300 Z ❤😊👍🏼🤙🏽 🌧️☔️🙂
Just a suggestion for next time. Put the end of the fuel pipe into boiling water until it softens up then after it’s on run it under cold water 👌. Ps watching from New Zealand love the work
@@throtl 4 inches of flat sheet with 80 lbs of fuel and 20 lb fuel cell, high rpm drone from flex us a real possibility. Harmonics are a bitch, I deal with electronics, harmonics are a bit of a speciality.
The next time you need to put something into a piece of pipe , heat up the pipe with a lighter or torch and the other piece goes in in nice and easy and then mold to the piece you put in.
would it be worthwhile to put a bead around the filler neck and then heat up the hose to make it pliable and easier to slip on... then clamp down, accordingly?
You guys should have done a VG30 TT Engine. They aren't that complex anymore and can be simplified and reliable. The SR will run out of steam quick and doesn't match the weight of the car IMO. RB or 2J would be sick. VR6 would be epic. Like the SR but better.
This build series is more addictive than any Netflix series. Great work. God bless
So true. I do like Gotham Garage, but I wish they spent more time on builds. A lot of shows are meant for larger audiences and it makes them lame.
Throtl and chill!!!!
hold the hose in hot water next time you need to insert the filler, it makes the clear tube more malleable and then it cools and tightens up
Yep and no lube required 😂
I wish the media guys would take the time to put episodes in order in the playlist folder! It would help keeping track through the episodes so much better
That Radium fuel cell install is clean. Those 10.5 gallons are going to go by quick, especially on E85
Quinn and Ricky together on projects are a dream team
For the fuel tank "isolator" I found out cheap door/trunk seals work exceptional as well.
I didnt know Rickey was an architect too?! Out here fixing floor plans LOL
He also “primered” something 😅
Underrated comment! 😂
They way Quinn says baby.
18:02 onlymechanics going craaaazy 😭😭😭😭
this is my favorite build of all time, the 300zx is my child hood dream car, I anxiously wait for every espisode
running the fuel tubes parallel looks way better, if there was a nice billet tube clamp/holder than ran them parallel, would like sick
lastly when this build is complete I would love to buy everyone lunch and see the car in person. ❤
Run the fuel hose’s together like Quinn and Ricky said. It looks cleaner.
Agreed, but perhaps remove 1” from the length of the line so it lays a bit more in unison to shape of the fuel hose? I agree with camera man, it’s a tad too long
Absolutely hooked on this 300zx build
Love how this car coming along. Can’t wait for mine to be done.
Can’t wait to see how the build turns out and see how it performs.
trick of the trade for hoses that are tight... use a heat gun and warm up the hose and use isopropyl alcohol and goes right on and the iso evaps, boom done! Works really good with push lock/ instagrip hose.
Soft sided velcro. 👌
Love the throtl Channel been an OG for the longest wish the best for all of you!❤️
I love how much these guys enjoy their job. Keep up the good work, guys!
@ClickOnMyProfile894 L fake. Get out of here
Vids never disappoint, home from work straight to these bangers
Loving the series, can't wait till the engine gets put in and see how it drives. Maybe I can get some ideals for my project.
Fell in love with the 300zx 🥰
WHats good Throtl, huge fan since I stumbled upon your content. I have a car for you guys to restore next. 2006 Subaru Legacy GT SpecB. Sleeper car. Your grown up STi. Give it a look. You will blow the car community away with that build.
Fuel tank rocks and i love that car color
Car is looking Amazing. Always a TOP LINE work. Throtl #1. Always entertaining.
Great video! Love the idea with the fuel cell ! Keep up the great videos
@3:22 ... what's needed is a bit more noise, I think
Solidarity in this digital age is very interesting; we(you) are still able too hermit and shine from your comfort zone: Keep going!
The workmanship is Top Notch!
love you guys are doing a Z32!
good job all!! clean setup!
300 Z looks amzing guys love ur videos
That tank looks Fresh in the 300zx
Los 300 son de mis favoritos !! Saludos desde Yucatán México !
The way that tank just slid In 😮💨
omg i want more, the 300 deliverin like SPARTAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.
Throtl VIP squad good morning Quinn Rickie Mickey, Evan, Rick , Victor Shawn Will Nate Tim Big Jeff and the rest of the team awesome custom mounting a radium fuel cell into 300 Z ❤😊👍🏼🤙🏽 🌧️☔️🙂
On those fuel hoses I would put a butterfly zip tie clamp to ensure the vent doesn’t drop
easy way to install that clear hose is to dip the end of the hose in hot water for awhile and it will soften it
You guys were the inspiration for me to get into cars and I appreciate what you guys do❤️
Awesome build. I want to see the finished car.
80th like......got here within 3minutes.... love yall so much.. love from throtl army
Let’s go!!! Thanks for the support
Just a suggestion for next time. Put the end of the fuel pipe into boiling water until it softens up then after it’s on run it under cold water 👌. Ps watching from New Zealand love the work
Keep up the good work making awesome TH-cam content
looks amazing good job quin
Ricky's homemade tool aka prison shank lol... Love the videos keep it up
Heat gun or even hairdryer would help make the rubber house easier to stretch over the filler neck.
17:44 haha that’s ideal electrical lube. It’s for pulling wire through conduit 😂
Next time dealing with a hose dont use lube just dip the end in boiling hot water it makes it very pliable and will be a lot easier 😉
300zx 🔥 🔥 🔥
Always use weld through primer before welding in a piece of sheet metal like that. Those overlaps will rust from the inside out.
We did.
@@mickeyandrade3435 🤦🏼♂️I shouldn’t have doubted you guys 😊
That a Festool cordless drill I spied earlier on in the video? Dang! Moving on up! 💎
My favorite series so far 💯 that silicon needed some tape to make them lines crispy though😂👍🏽
I love this 300zx its my favorite build so far
So clean, great series so far! That sheet metal looks thin though, is it not gonna flex under weight when tank is full?
Dude this tank looks so small. What capacity is it? 10-12 gal? Geez, you're going to be refueling every 3 days!😂
i think it is 10.5 gallon
Yo plasma cutter!!! Cut out for that tank like butter!!!
Love the build. Was a dream car of mine in H.S. Class of 03. Evap looks better up top, sorry Nate xD
great job familiaaa huge love from me and my son anthony
How big is that fuel tank? It seems really small in comparison to the stock size.
That's radium's 10.5 Gal.
Looks awesome so far 👌👌
Mini truck please, love yall
I would of zip tie the last two hoses and call it a win 😅 but I'm nobody you guys rock bro
They will get fastened.
Another W throtl vid ❤
Definitely route the evap on top of the fill… add some bougie zip ties (evenly spaced, of course) and call it a day 🤌🏻
Moving the gas tank from in front of the rear subframe to behind it. Wonder if that will affect the handling negatively.
This is the best Nissan car ever 🇯🇵 👑👑👑👑
Ricky, make them get u a bead roller brother, give some stability to that sheet.
We have one. A bead roll on this piece wasn't necessary.
@@throtl 4 inches of flat sheet with 80 lbs of fuel and 20 lb fuel cell, high rpm drone from flex us a real possibility. Harmonics are a bitch, I deal with electronics, harmonics are a bit of a speciality.
20:14 Poor Quinn
The next time you need to put something into a piece of pipe , heat up the pipe with a lighter or torch and the other piece goes in in nice and easy and then mold to the piece you put in.
Looks sweet!
If you let the vent tube hang it'll vent better because the fumes will be able to go straight up instead of going up and then flat. IMO
I'd loosely zip tie em together so vent hose isn't flopping around.
Nate is the goat
Next time just heat up the ends of the vinyl , rubber or silicone hoses to be more flexible to fit easily without suffering 😂
loved it. I always use a cigarette lighter messing around with hoses like that
more awesome progress guys
Why didn't you use the 14 gallon rectangle tank? Looks like it would have fit well.
15:03 what’s with the bleep
Tube/hose up for sure lol, it's looking Gucci!
Is the black car next to the 300zx a convertible mr2 sure looks like it
how many gallons does it take
Looks like you guys have never made bong before 😂 put the hose in hot water next time round and it will slide right on ✌️
Nate the hose is to long mate, it needed to have some taken off for sure, but you can't have it dropped down either.
Hope yall are staying safe out there in SD i know its underwater right now
Do they make that tank for a S13? Looks so flush and clean.
Nice! size and Brand of the wheels
All that... on a freshly painted car... lol! Looks good, guys!
Nice job
Sooo you’re putting a TT VG after the SR??? 😅😅
@Throtl. Where would you suggest, for someone that wants to build their vehicle but has limited funds, go to improve the overall look and performance.
thats literally my dream car
sometimes i wonder if these companies future proof their names.
what if we actually got Radium, as in radioactive metal fuel tanks someday.
🤣
Next time u have to jamb a rubber hose onto pipe use hair spray, slippery as fk, then it evaporates.
Old bicycle hand grip trick, lovin the Z 😆
would it be worthwhile to put a bead around the filler neck and then heat up the hose to make it pliable and easier to slip on... then clamp down, accordingly?
so the surge tank gets filled off of a big gulp straw?
You guys should have done a VG30 TT Engine. They aren't that complex anymore and can be simplified and reliable. The SR will run out of steam quick and doesn't match the weight of the car IMO. RB or 2J would be sick. VR6 would be epic. Like the SR but better.
Vk50 tuned and N/A woulda been killer.
How about you use image stabilization on that fancy camera you have. It's sickening to watch these new videos with all the hand held shaking.
How many litres is that thank? It seems so small
trim that final hose an inch or two!
Cable managment: that
Love the Chanel