ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
1971 Johnson Evinrude 9.5 horsepower outboard lives again, repair, restore. Me and my Johnson
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2021
- Picked up a 1971 ( I was told 69) Johnson 9.5 horsepower outboard to use on the rowboat, possibly bring to Florida and find a row boat down there.
This outboard was not running, previous owner claimed it stopped runnning, would not start and he just stored it away many years ago. I Replace the impeller, check carb to clean, but its spotless. Checked spark and spark plugs, checked the thermostat. Wires to the stop switch were falling apart so I will replace that with a tether stitch. Put gas in it and it fired up!
Next video on this outboard will be a test on the water
A single bat can eat up to 1,200 mosquito-sized insects every hour, and each bat usually eats 6,000 to 8,000 insects each night
OMC filed for bankruptcy on 22 December 2000. It has been owned since 2001 by the Canadian firm Bombardier Recreational Products. Bombardier stopped selling outboards under the Johnson brand after 2007, and moved all sales entirely to Evinrude Outboard Motors until they were discontinued in June 2020
Links in this video:
Tether kill stop button: amzn.to/3BGRYD4
Spark plug cleaner: amzn.to/3eCg1tj
Older links:
28 Inch Vinyl Cutter Machine: amzn.to/3wutdGr
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the vehicle you're looking for (upper right).
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed.
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Custom music and Voiceovers by Harp C Chord, Ryan Harper.
Memes etc:
Music clips:
Movies: retro johnson commercial, waiting, the rock
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
That Johnson commercial is hilarious 🤣
Loved your battery powered electric starter. That pin you didn't want to drop looked like a shear pin.
My dad worked on saltwater outboard motors for a living. He was very good at it. Once a guy gave my dad a 25 HP outboard he found scuba diving. It was one big chunk of corrosion. Dad fixed that old motor up and I learned to water ski behind it.
Back to the shear pin. Before I was born, my dad and his uncle went fishing in a river. They hit a submerged log and sheared the pin. No problem says dad, I have a spare shear pin in my tackle box. They cock the motor up, remove the carter pin, the nut and the prop. Uncle accidentally knocks all the parts overboard. Now the situation is much worse. Uncle says "I'll get them" He takes his shoes off and goes over the side. The river is about 5 feed deep and very muddy. He walks around on the river bottom and says, I found something, dad thinks it MIGHT be the prop.
Uncle retrieves the carter pin, after walking around some more and "feeling" with his bare feet, he recovers the nut, the broken shear pin AND the prop. Dad reassembles the parts, cranks the motor and off they up upstream back to the boat launch. 💛
Damn. Good story
Adding the Rock to the commercial was perfect!
Great little motors. Two things I noticed was that it was really dumb to pull the shift rod pin to drain the oil, the oil drain is a big flat head screw on the other side near the bottom. Also the water pumps are not self priming, they must be under water.
The drain is the right screw I took out. As far as I know. The shift pun has a long pun at the end, this didn't. I do realize now the pump must be totally under water....
Love it when those oldies fire right up after a little TLC applied to 'em. Good score.
The run FOREVER!
That's quite the Johnson you got there, Cheesy. :^)
Why thank you!
just got one Thanks for posting this video!
It was great help
I love outboard vids, I'm a big big fan of 'thatboatguy ' in Florida how he gets allsorts at auction and fixes them up then takes them all out for a rip... Maan Florida looks beautiful 😍
I'll take one of these motors down to my place in FL
Thanks to you, I now have a new channel to obsess over.
👍👍👍🧀
My Dad always put Johnson motors on his boats because to him they were dependable and they always started first pull. In my experience, that wasn't always true but for him it was. 😅 He was really disappointed when he found out you could get Johnson's anymore.
I have had some of those over the years. A 1970 9.9 that looked the same! Sold it a few years ago to a guy who was building a wooden boat. I had the old stickers still but the paint on the cowl and leg looked fine. I always polished it when I put it away for the season. I think I had eleven 9.5 and 9.9 motors all lined up on a board in a barn I converted to vehicle storage. Each horse stall had a vehicle in it and since they were old trucks it looked much better than a person would think. I put a brand new set of reprinted stickers on the motor, several actually and gave him a choice. In the end he took the 1970 Johnson, a 1977 Mercury and a 2010 Tohatsu! The Tohatsu was a 4 stroke. The rest went for auction when I sold out of most of everything. They garnered a ton of attention! Those old outboards have memories to them I guess. I thought Johnson were better than Mercury back then, now it’s either Mercury or Yamaha. I had a 7.5 Honda that was a royal PIA and later a 2012 Honda 9.9 that started out pretty awesome, then it just lost compression. Just out of warranty,,,,, of course. Won’t buy their outboards anymore.
Just bought a nice Marlin 10 foot Jon boat for fly fishing and am putting a 55 lb thrust Minn Kota Endurance Max trolling motor on it only. I was going to get a gas motor, but bought two 12v 100ah LiFePo4 batteries and should be able to fish hard for about 10 days on those motors, I also have solar on top of my canopy on my truck so can charge one while I use the other. I have a 30 amp charge controller and have not had any issues with that on my other Lithium batteries. Try and be green,,,,,, until I take the pontoon out!! Hahaha.
I am getting a new project truck,,,,,, it’s a 1949 F1 Ford 1/2 ton stepside with a Chevy 350 in it, ugghhhh, but I want to do a supercharged flathead V8. I have not even had a flathead yet!! Not a ton of power but should be cool as h*ll!! It’s almost purple pink so it will be stripped down and repainted. I will try a 60s style semi custom interior, the suspension is fairly new and has a perfect stance for my tastes. Yeahhhh I get so excited getting these projects. Should come off of the transport on Wednesday next week. Maybe I will get a GM product to put the 350 in,,,,,,,,. My shop/garages will be full if I do two more projects,,,,,,,,,. The old trucks are really so easy if you are not going with a full on custom. “Painless” brand wiring harness, rip everything out, replace the wiring and the rest is like a big model! Especially when the bodywork is done. Doing it in Ford’s Iconic Silver instead of the other paint which was probably expensive, but is soooo uglyyyy!! Haha.
I am really liking these mechanical videos. You have so much knowledge and the skills to go with the knowledge. No matter how much work a person has don’t that is similar, you can always learn from someone else. Hoping to see a video with the small aluminum and that Johnson now vs the Force!! Both should get the boat up on plane with one person in them!
Stay safe MotoCheez and Mrs MotoCheez!!!
That's awesome. I had a ton of outboards too. My fav was always evenrude Johnson omc. The Yamahas are too now! Hell yeah do that truck
Outboard Engines are like Chainsaws, simple, but what a pain!
Truth
Me and my Johnson are having a party later 🤪, I love it when a plan comes together.
😁
Whenever I see a Motocheez outboard vid I will now just shout "It's the impeller" :)
My dad's old Zodiac had a 25hp Johnson on it. A lot of fun times in that little boat. My first experience of the ocean in fact.
Haha. Sweet! Small boats are always the most fun. I've had many big boats and the small ones with small outboards end up the cheapest and most reliable.
When you busted out the shop-vac, I was waiting for the Spaceballs clip “suck. Suck. Suck. Suck…”
Great videos. I can’t wait for test run of the Rock Johnson.
That would have been good!
My dad has one of these marked "Evinrude Sportwin" light blue in his basement for well over 30 years. We call it grandpa because it's so old. Can remember it running only once in that time. Gonna order a new water pump and spark plugs for it because I need a boat and a motor, because needlefish season at the Baltic Sea is going on now and the big fishing boat has broken down and replacement parts are coming from the US. Wish me luck :)
Good luck!
Yeah, cork is common in the engines they made back then. Bending it ever so slightly upwards helps as the needle valve can be stuck when it has stood around for a while.
Thank you for the video 👍
😮 Cresent Hammer!!
I'm giving you a "Like" for cresent hammer usage!
😅😅👍
awesome video!
The only person I know with a straight anti seize brush.
It's 20 years old too. I cut the bristles half way to make more rigid
you are the motorboat engine whisperer. great job on getting it running!
🤣 thanks
I had that same outboard when I was 15. Me and my Johnson 😀
Great little motor. Been running perfect.
Motor was pretty clean inside for an old girl…should go for a long time , nice job Moto. !
Good goin MotoCheez boater😉
Love the bonus bat video.
Just checking in!:) Semper Fidelis
Bam!
1st
Mr Cheez the food teaser at the end just makes me hungry and I'm fat enough, but keep up the good work always enjoy the repair video's need to feed my brain more then my stomach.
Haha me too!
You crack me up. Keep going
Glad you got your old johnson working again... I'll have to try a new impeller in mine to see if it'll squirt harder
😂😆😁
Just vacuumed about 2# of that queefus inducing material out my Frontier PU's AC/heat unit.
Hate mice
I had a '76 Johnson 9.9 electric start on 14 ft. jon boat. You know how to fix everything.
Thanks! 😁 I try
I had one of them when I was a kid. I got it used from a rental fleet near my house, used it a long time on a 12' tin boat from Sears. It had like a shift point in it something I haven't seen before or since in an outboard.
What do you mean shift point I have 71 evinrude 9.5 just super curious what you mean. Just to shift from f n r. Or kinda like an extra gear
@@dickjames5007 it may have just had a problem. But yeah, it seemed like it had an extra gear. It would kind of wind up a little right about at planing speed then lock up and scoot.
maybe the hub was slipping? or prop cavitating?
@@MotoCheez it might have been something slipping, it didn't feel like any kind of cavitation or ventilation I've ever come across. My 12ish year old brain just thought that's how it was supposed to be. I just thought I had a 2 speed outboard!! 🤣
i bet the hub was slipping on the prop i had a proontgat did that
they don't do the amazon vans where i'm at. i see them all the time but they use ups for where i live
Its alive !
That's how the pull start is made for that motor.....good find....sell the Force now....quick !! 🤣 9.9 is a dependable motor..
The Force runs great tho! 😁 We will see how the Johnson works on the lake when rest or parts get here
She’s pissin now!
She's a pisser!
@@MotoCheez Well isn't a good Johnson always a Pisser? As long as it ain't leaky. Nobody likes a leaky Johnson.
Dude, we recently fixed one up just like this. No idea the year but it's exactly the same.
How's it run?
@@MotoCheez Like a dream from what my folks say. I haven't been out on the boat yet with it on there.
The wife said thats one handsome johnson LOL Shes never said that to me haha! Great video man!
🤣😂😁👍
the intake is BELOW that metal plate. the plate is for reverse flow
To add more detail--the water intake is the 2 screened ribs below the exhaust outlet. The prop pushes water towards the screens.
The little plate above the cavitation plate is for cooling water flow when in reverse gear. Nobody has ever explained why the 4 tiny intake ports are facing forward, tho...lol
@@guy48065 right. I believe the screen acts like a scoop to push water up into the pump from below. the intake ports face towards the bow to scoop water at high speed, or do you mean something else?
We talking about the water inlet for the impellor? It's designed to scoop the water as it's driving forward, reverse there isn't enough speed or force to stop the suction.
🔥🔥🔥🔥🔥🔥👍👍👍
A bat alone outside during the day is a bad sign...do not touch. Awesome 😎 👍 job on this . Did u change the plugs?
Yes, yes 😁
The 1 dislike is "The Rock" saying O c'om people lol
😁
Cheez too bad you didn't have that outboard about 10 years ago I could have had ya nice score of parts
Damn!
Change carb and port get 15hp easy
Putting the rubber on the shaft and lubricant on the tip of your jonson
🤣
Another nice video cheesy! You did the right way of troubleshooting it from top to bottom. Did you check the sacrificial anode? If it fell off which they do it would explain all that corrosion. Without it the engine itself just falls apart. The old omc's are pretty good running engines. I had a 25 hp 82 that's still running today.
I put the OMC on your boat and use the force as an anchor.🤣 There are two different sized transoms for every OMC motor.. cavitation plare should be underwater and should have the anode on it.
It's still good. Must have been fresh water
@@MotoCheez make sure there's good contact between the anode and the body of the motor. I used to take mine off every spring and sand it down toa bare metal
Good idea.
Dam right lucked out not much skill
That was selecter cradle screw not oil fill
The impeller is in the shaft
Yes, on lower unit input shaft
I have one...😎
How's it work for you?
@@MotoCheez it's stopped..😞
Aww. That stinks! That's 3
There's something deeply wrong about the phrase "You, your kids and your Johnson."
As others have said, I believe this is where the phrase "Johnson" referring to a body part became a thing. 😂
Ya gotta wonder if that commercial accidentally kicked off using the word "Johnson" for that particular part of the body.
I wonder that too
What kind of oil did you use for the lower unit? (Also, fixed the problem I had with it I commented about previously. Just had to get a new prop since it’s a pin drive. Thanks tons)
I bought the lower unit oil from walmart
Like any old guy...prostate trouble ...hear the old yamaha's are the thing in Florida...check out that Boatguy on TH-cam...he tries to kill a YammerHaul and it just keeps running...Laterz MOTO
Yes I've heard the Yamahas are the best
when you use the drill to turn the engine over is it set to hammer drill or just normal? Thanks
Normal drill
Here's johnny 😁
Good one!
Everyone deserves a Johnson...
Those spindle starters are fun to repair, not
You can still get the plastic bendix from eBay new old stock
Sorta surprised you didn't order the stainless bolts on Amazon as well (Or are they just taking longer to get there from Amazon?). I got a few assortments of common sizes around.. Just used some of the metric ones on the Grill yesterday. and for anything else I order the specific sizes.
I did order them off Amazon.
@@MotoCheez Must just be taking longer than the water impeller. Just seemed weird. Saw you with the impeller and then no new bolts.
I ordered impeller when I started on the motor. Couldn't find the right size on Amazon either.
😆😁🥶🕶
Hey I need some help! I can’t figure out how to find/replace the prop hub in this same motor. The engine runs fine but it’ll rev high and get no torque at certain RPMs
Ebay was the only place I saw parts. You think the hub is slipping?
@@MotoCheez pretty positive, saw online that a bad hub equates to random high rpm’s and no torque. Had to run it super slow all the way back to the ramp or else it would lose all thrust
That's all part of the prop I thought. The hub protects the gearcase from breaking. Trying to remember what prop this gad.
I just looked on mine and it looks like that unit does not have a slip hub on the propeller, it's a pin
@@MotoCheez ah that helps a ton, how do I go about replacing it?
Maybe
4th!
Do outboards have something in the carb to create cyphon to tank?
They have a fuel pump, vacuum operated
@@MotoCheezhmm I changed that and the filter. Hoping it's a collapsed line
Make sure your tank is vented and your connections are sealed tight
@@MotoCheez will do captain
A money maker since forever. A video on how to improve your Johnson 😂
Cheese quit yankin on your Johnson! There's a you tube music video you gotta see about sitting in the middle of the lake yankin on a Johnson!
I can't help myself 😂🤣😆
Sportwin has no electric starter available
Sportwin?
🤣
You ever heard of OIL
🤣😆
Finally a face reveal… even if it was in a bucket of oil …lol
😁😂🤣👍
@@MotoCheez you need not worry about me hunting you down I’m in Ireland !!
Haha. 👋👋👋👋
1st!
2nd!
Went from motocheez to botocheez
😂🤣😆
10:54
Face reveal.
😁
🧀
Beep
Meep