Looks good Moto,you can adjust everything else to fit your needs as to how many people are with you ,just a fishing trip, or your picnic trips leaves plenty of open space to accommodate your need for the day ! Have a good one …..
I would check the layout of some modern poon boats. Generally they are laid out like a living room, with benches facing each other in the front area for socializing, as well as a bench or extra Captain's chairs in the back. A table of some type is usually included as well for drinks and dining. So unless you are going for a "fishing poon boat" set up (which would be kind of cool) I would say you need more benches. If going for the fishing boat, mount some fishing chairs up front for sitting in.
That cleaned up nice cheesy! Yeah that OMC engine should work fine I would bet. I like the new layout I think it's better for you that way you got more room. I probably mount one of those Big mouth Billy Bass talking fish right in front of the captain's console. I guess I'm friends with the pontoon boat up in the mountains and they have one of those plastic garage things with the aluminum pipe? It fits right in there and it keeps it plenty nice and safe through the winter. Going to have to take it out on the lake and make a video for us! Thanks for the video it was great
@@MotoCheez The entire Northeast had been super comfortable for the last week or so, once we got past all those storms. I live in WNY and it was low 70's, low humidity and breezy today. Gorgeous!
I have a pontoon boat that my cousin built for his parents. When the pontoon boat got to be too much for them, I bought it. cleaning the carpet was always "trouble" Cousin said he quit building pontoons with indoor/outdoor carpet and switched to a 7 part epoxy paint with a splatter design. 10 years later it still looks great. Hit it with a hose and it's clean. I asked cousin make me a few mods. Stip off deck catpet, spray on new 7 part epoxy paint, installed a door in the back rail and a swim platform on one pontoon with a flip out ladder step for easy boat boarding from in the water. Shim UP the sides & back walls with a quarter inch spacer for quick and easy draining while washing off the deck. Trailer winch post and Tee included steps for easy boarding while on the trailer. I kept my pontoon under a harbor freight canopy. I always thought about making a frame on the trailer to hold the canopy, Looks like your trailer already has a frame for the canopy legs. Now my cousin builds the sides out of expanded aluminum mesh. Cuts down the weight and wind load. 💛
Great progress I like the ideas. I see the new pontoon boats use a vinyl flooring. The 2018 I bought in FL has thatslt floor w the spacers lifting the tails. So boat builders progressed too.
#11 Not First! My brothers Pontoon had the mold too. We used soft scrub with bleach. We then use a green nylon to scrub it in and let it set in the sun for a day. Then we used 303 protectant after it was clean.
Hello moto.... well it's about floating time that you for back to fixin' that pontoon boat... thought it was gonna be the next ss minnow... yes the new setup is better... more roomy.
This was the project that lead me to your channel. Also I had this old 3500hd that the bumper was welded steel that was an air tank maybe an addition to the mini truck have stored air pump kicks on to just refill
Maybe try a (strong) solution of bleach to take the stains off those seats? P.S. -- Lay out a space for a collapsing table to place a camp stove? (Since you might be camping with it.)
Or a two burner propane grill.. Lol .. Could control the flames good and fast during an emergency. Small fire extinguisher. My parents have a pop up bathroom on their pontoon boat. Can double as a changing room.
Get yourself some 20 mule team Borax, a big big box of baking soda and some tsp trisodium phosphate mix some basically in equal parts a few tablespoons and a couple gallons of water and have at her and it will eat that mold up and the mold won't come back like when you Clorox it that's what I have to do to my boat on the salt water in Texas
Oh and also which one is quicker and I’m going to do modifications to it but I figured the magician would be better for the on road use that I’d use it on
@@MotoCheez Yeah I just saw his comment..My buddy has one of those rail mounted BBQs, they're pretty slick .. Great space saver.. The seating is perfect btw.. Oh.. Don't forget a jamming Stereo.. Lol..
So my son looked over my shoulder while I was watching this and he said, “Isn’t that the pontoon boat (poontang boat) you bought to make a house boat out of dad??” He thought I was watching a video I shot….. I replied……”Nope….. some other idiot!!” 🤔😂😂😂😂😂😎
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
Im impressed that Mini was able to pull the boat out as easy as it did.
Pontoon boats are light. This with motor weighs about 1500lbs
Never underestimate Mini.. Meep Meep
Brings back memories of going out on the boat with my pa... love them party boats.
You had me in stitches with the mam meme keep up the memes & yes like the new layout on the pontoon - n0mad
Looks good Moto,you can adjust everything else to fit your needs as to how many people are with you ,just a fishing trip, or your picnic trips leaves plenty of open space to accommodate your need for the day ! Have a good one …..
Yes! And I can put my Z50 on there.
Good layout,cover that boat! Love it! 🥸
Magic sponge man! It will get those seats white again.
Glad to see the pontoon out again! Until you get your screened in canopy you could use your Jeeps roof top tent.
True!
I watched too many water jet video games on here, but it's so relaxing :D Add a disco dance floor or a glass bottom to see the fish?
New layout is "more gooder". Room to move around is good. Weight can be more easily distributed like this.
Looks good the way you put it. Cheezerific!
love your new sponge bob intro! & good to see mini putting in some work. pontoon boats are so cool, but i already have too many toys...
I would check the layout of some modern poon boats. Generally they are laid out like a living room, with benches facing each other in the front area for socializing, as well as a bench or extra Captain's chairs in the back. A table of some type is usually included as well for drinks and dining. So unless you are going for a "fishing poon boat" set up (which would be kind of cool) I would say you need more benches. If going for the fishing boat, mount some fishing chairs up front for sitting in.
I checked out a few designs. I was thinking coolers as chairs that can be moved and a small folding table possibly..
It's Pontoon time!
That cleaned up nice cheesy! Yeah that OMC engine should work fine I would bet. I like the new layout I think it's better for you that way you got more room. I probably mount one of those Big mouth Billy Bass talking fish right in front of the captain's console. I guess I'm friends with the pontoon boat up in the mountains and they have one of those plastic garage things with the aluminum pipe? It fits right in there and it keeps it plenty nice and safe through the winter. Going to have to take it out on the lake and make a video for us! Thanks for the video it was great
Hopefully it's cooler up there than it is here in Kentucky maybe you can get some fishing done it's too hot to do anything here but watch videos.
It's been cooler. Like high 70s
@@MotoCheez The entire Northeast had been super comfortable for the last week or so, once we got past all those storms. I live in WNY and it was low 70's, low humidity and breezy today. Gorgeous!
I have a pontoon boat that my cousin built for his parents. When the pontoon boat got to be too much for them, I bought it. cleaning the carpet was always "trouble" Cousin said he quit building pontoons with indoor/outdoor carpet and switched to a 7 part epoxy paint with a splatter design. 10 years later it still looks great. Hit it with a hose and it's clean. I asked cousin make me a few mods. Stip off deck catpet, spray on new 7 part epoxy paint, installed a door in the back rail and a swim platform on one pontoon with a flip out ladder step for easy boat boarding from in the water. Shim UP the sides & back walls with a quarter inch spacer for quick and easy draining while washing off the deck. Trailer winch post and Tee included steps for easy boarding while on the trailer. I kept my pontoon under a harbor freight canopy. I always thought about making a frame on the trailer to hold the canopy, Looks like your trailer already has a frame for the canopy legs. Now my cousin builds the sides out of expanded aluminum mesh. Cuts down the weight and wind load. 💛
Great progress I like the ideas. I see the new pontoon boats use a vinyl flooring. The 2018 I bought in FL has thatslt floor w the spacers lifting the tails. So boat builders progressed too.
#11 Not First! My brothers Pontoon had the mold too. We used soft scrub with bleach. We then use a green nylon to scrub it in and let it set in the sun for a day. Then we used 303 protectant after it was clean.
Looks good this way . Too crowded the original way .
I have a question, maybe you can help with......Should you cover your boats?
I'm not sure... 😆
ZEP from home Depot works very well on the mold and mildew on the seats.
Like the screen house ldea
I use a harbor freight black net as a cover with about 8 clamps from harbor freight too. Works great !
Oh yeah? It's big enough?
In a coma at the tablet now!😁😁
Oxy clean spray in the shade and seats should look like new. May need to cover with paper towels to keep wet for at least half hour.
I have a few ideas I want to test, this sounds good too
dam close
3rd
Hello moto.... well it's about floating time that you for back to fixin' that pontoon boat... thought it was gonna be the next ss minnow... yes the new setup is better... more roomy.
lookin' good
Like I told you last episode you should've let Uncle Roman drop some money on a kick ass ski boat...
Daddy likey! More room for the driver man!!
cool project ,I like the walk around area .I have 13foot whalers .
Agreed. I like the room
Do you neighbors to the south have spray9 it should work on those seats. works on the white patio furniture makes it nice and pretty!
This was the project that lead me to your channel.
Also I had this old 3500hd that the bumper was welded steel that was an air tank maybe an addition to the mini truck have stored air pump kicks on to just refill
The crossbeam for the dump I thought about using for air storage
@@MotoCheez it's so simple and nice to have
I like the revised lay out better.
Mdr mold awy spray is amazing and will clean the seats up perfect
MDR mold away
Ill try it, gathering up items people say to use and test in a video
Maybe try a (strong) solution of bleach to take the stains off those seats?
P.S. -- Lay out a space for a collapsing table to place a camp stove? (Since you might be camping with it.)
I'm going to try. Had some good seigestions. Commented here. I'll have to test a few.
Hello MOTO, go look up Custom built fishing pontoon Lucille...just some ideas you might like...I liked it
Will do
You might try a little vinegar and water on that mold
I'll try it. I want to pool the comments and try them all in a. Video 😎
Best part of waking up is watching motocheez I mean botocheez I mean good morning Mr cheez lol
GOOD MORNING
@@MotoCheez all caps I must be very special
That's alright, might want some weight up front, just nothing to block your view
Looks good but can you put your gas tanks on the pontoons by your motor?
Yes, the tank can be strapped on the rear of a pontoon.
Motocheez party boat!
Methyl ethyl ketone might take those stains off the seats
Have a few good recommendations. I'll try it, thanks.
Need a bbq place. 😁 Maybe a stand for a bbq to sit on and removable but fixed and locked in while in use
They make grills that hang over the side
@@MotoCheez yeah.. Would be nice.
Nice I just left the same comment.. Great minds think alike.. Fistbump
Or a two burner propane grill.. Lol .. Could control the flames good and fast during an emergency. Small fire extinguisher. My parents have a pop up bathroom on their pontoon boat. Can double as a changing room.
I've seen those!
Sitting sideways against the direction of travel always makes me sick. I hate it.
Get yourself some 20 mule team Borax, a big big box of baking soda and some tsp trisodium phosphate mix some basically in equal parts a few tablespoons and a couple gallons of water and have at her and it will eat that mold up and the mold won't come back like when you Clorox it that's what I have to do to my boat on the salt water in Texas
I'll give that a try!
For the seats and rug?
@@MotoCheez anything moldy seats rug fiberglass
I'll try it
Hey I do like 90% street riding and I’m looking at a hawk or magician 250. Which one do you think is better?
Oh and also which one is quicker and I’m going to do modifications to it but I figured the magician would be better for the on road use that I’d use it on
Magician for on road use
@@MotoCheez thank you for the reply motocheez
Don’t forget the bbq
Yes! Many mentioned that. A must have
Woohoo
1st!
Sweet mother of Jesus! Finally made it.
Send name and address motocheezmail@gmail.com congrats
@@markrjones its ma'am!
@@markrjones 🏆🥇🏆
Definitely need to keep it covered or you're going to have to keep cleaning the fungus off your poontang boat.
Oh yeah
Better start thinking about BBQ placement as well.. No fun on the water unless you're burning some meat.. 🌭🥩🔥
That's right! You're the 2nd one to mention That!!
@@MotoCheez Yeah I just saw his comment..My buddy has one of those rail mounted BBQs, they're pretty slick .. Great space saver.. The seating is perfect btw.. Oh.. Don't forget a jamming Stereo.. Lol..
Haha. Yeah. I did the speakers
I think the video was too short and I like the new seating arrangement. Mam Sir? OH, What the H*LL! Let's just say Freak Show.
👍🤣
How do you find time for all your projects and having the place in FL to care for? Asking for a friend
It's not easy!
50/50 muriatic acid and water will clean those seats right up. rinse it quick off any metal
Never heard that one, I'll try it.. have a few suggestions I want to test
@@MotoCheez it gets the brown scum line off of my boat from sitting in the Byram River. Let me know how it works for you.
@@MotoCheez and by the way be careful of putting all of the weight in the back of the boat when you are trailering it.
I have 15% tongue weight. I know better on towing 😎👍
I'm going to try everyone's suggestions. Have to go back thru the comments
Its Ma'am😳
👌
So my son looked over my shoulder while I was watching this and he said, “Isn’t that the pontoon boat (poontang boat) you bought to make a house boat out of dad??”
He thought I was watching a video I shot…..
I replied……”Nope….. some other idiot!!”
🤔😂😂😂😂😂😎
😆😆🤣😁😂
We need more CHEEZ .
Should be one tomorrow
@@MotoCheez AWESOME !!!!!!!!
I built a camper pontoon boat and put a kitchen counter along the back fence over the motor. Ck my channel to see the build.
I'll check it out.
Looking good. Just checked some of your videos out.
🔥🔥🔥👍👍👍🔥🔥🔥🔥🔥🔥🔥
Beep
Meep