2015 - 2020 Ford F150 EASY Amp and Sub Install!

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ก.ย. 2024
  • Parts linked in the description below!
    Watch a full tutorial as a 2019 Ford F150 Truck will have a brand new Rockford Fosgate powered subwoofer installed to a pre-exsiting aftermarket radio. This powered sub will provide much needed low-end power lacking in the factory speakers.
    Note - this F150 was not equipped with the factory Sony or B&O amplified sound system. If you have Sony or B&O audio system and running the factory radio, we will link those specific parts down below.
    This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This video also includes dash trim and stereo removal, radio wiring, and installation.
    For an unboxing of a similar Rockford Fosgate powered sub, click here:
    • Best Powered Sub On Am...
    For a similar amp and sub install to a factory B&O system, click here:
    • 2021 - 2024+ Ford F150...
    For the radio Install video on this generation F150, click here:
    • 2015 - 2020 Ford F150 ...
    For another F150 5 channel amp and sub install to an aftermarket radio, click here:
    • 2015 - 2020 Ford F150 ...
    For another F150 5 channel amp and sub install to an factory radio, click here:
    • 2015 - 2020 Ford F150 ...
    For the front speaker install video on this F150, click here:
    • 2015 - 2020 Ford F150 ...
    Click here to see the rear speaker install on this F150:
    • 2015 - 2020 Ford F150 ...
    If you have any questions, leave a comment below! Be sure to like and subscribe!
    Parts Used (Amazon Associate / eBay Partner Paid Links):
    *Rockford Fosgate 8" Ported Powered Subwoofer:
    *Skar Audio 8 Gauge OFC Wiring Kit:
    --If using factory radio w/o Sony or B&O audio, you can use this optional T harness LOC for a plug-and-play install: amzn.to/3qY4rSB
    **If installing to a factory radio and want a fully assembled LOC T harness adapter, click here
    www.provobeast...
    NOTE: If you have Sony / B&O and running the factory radio, we recommend using a high-power line out converter:
    *Pac LP7-2 LOC: amzn.to/33lRh5u
    OR AudioControl LC2i Pro: amzn.to/42kWnYU
    OTHER recommended parts for bigger amp and sub systems:
    Subwoofer boxes only
    *Skar Quad 8" ported forward firing sub box: amzn.to/3r3pjIc
    *Skar Dual 8" ported forward firing sub box: amzn.to/3PdixaW
    *Skar Dual 10" sealed down firing sub box: amzn.to/4603A2q
    *Skar Dual 10" ported down firing sub box: amzn.to/45F1pBR
    *Skar Single 10" ported down firing sub box: amzn.to/3PpX8fE
    *Skar Dual 12" sealed down firing sub box: amzn.to/3LfFd95
    *Skar Dual 12" ported down firing sub box: amzn.to/4605NuG
    *Skar Single 12" ported down firing sub box: amzn.to/45GOcZa
    Loaded subwoofer boxes
    *Skar Dual 10" sealed down firing sub box: amzn.to/47ZAdzg
    *Skar Dual 10" ported down firing sub box: amzn.to/3Z1AwFL
    *Skar Dual 12" sealed down firing sub box: amzn.to/3EsRpPY
    *Skar Dual 12" ported down firing sub box: amzn.to/3P8Yjia
    *Skar Single 12" ported down firing sub box: amzn.to/3P8Yjia
    Recommended Amplifiers
    *CT Sounds 700w RMS @ 1 ohm amp: amzn.to/3zbEgH0
    *CT Sounds 1000w RMS @ 1 ohm amp: amzn.to/3EZ36Ny
    *Skar Audio 800w RMS @ 1 ohm amp: amzn.to/4824qxy
    *Skar Audio 1200w RMS @ 1 ohm amp: amzn.to/47Zqvgf
    *Stinger 700w RMS @ 1 ohm amp: amzn.to/3Ep2Wjk
    *Stinger 1000w RMS @ 1 ohm amp: amzn.to/460QcLp
    *Stinger 1500w RMS @ 1 ohm amp: amzn.to/3sMjijm
    Recommended Wiring kits
    *Skar audio 4 gauge OFC amp kit: amzn.to/31f0r2U
    *CT Sounds 4 gauge OFC amp kit: amzn.to/3kNDnlj
    *KnuKonceptz 4 gauge OFC amp kit: amzn.to/34QaiuB
    Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases

ความคิดเห็น • 33

  • @ProvoBeastAudio
    @ProvoBeastAudio  ปีที่แล้ว +1

    Parts used linked in the description of the video. Check it out!

  • @Nate-qc8kb
    @Nate-qc8kb ปีที่แล้ว +5

    Hey, I see my truck install in this video! @1:49. Still sounds amazing!

  • @jorgesias1932
    @jorgesias1932 10 หลายเดือนก่อน +1

    How do I add a lc2i to this setup?

    • @ProvoBeastAudio
      @ProvoBeastAudio  10 หลายเดือนก่อน +1

      If you have Sony / B&O, connect to the sub output from factory amp. If base audio and just adding a sub, just tap it into any speaker wiring. You can access from rear B pillars for rear speakers, or behind the radio for any speaker wiring.

    • @jorgesias1932
      @jorgesias1932 10 หลายเดือนก่อน

      @@ProvoBeastAudio I bought subs and an amp too can I still just tap into the output of the B&O amp?

  • @adonaya.1594
    @adonaya.1594 10 หลายเดือนก่อน +2

    Another amazing video!!!! thanks for sharing
    have a question, if I have B&O basic system (F150 2022) improving the bass I have kicker amp and sub, do I will need a LC2i pro??

    • @ProvoBeastAudio
      @ProvoBeastAudio  10 หลายเดือนก่อน

      Nope, but I do recommend a higher power input handling LOC since you have the factory amplifier. A more budget LOC would be this guy: amzn.to/49CJdex

    • @adonaya.1594
      @adonaya.1594 10 หลายเดือนก่อน

      @@ProvoBeastAudio Oh no, I read late your answer, I was working today doing the wiring for my truck ( which the power and ground wires are to short, I have to found an adapter and buy more wires) I installed the LC2i pro already, I hwas watching a video front your channel, will be any different if I continue using the LOC?

  • @Goodvibes-Adventures
    @Goodvibes-Adventures ปีที่แล้ว +5

    🤔. From research I've done on my 2015 F150. They're should be a factory installed...Hot Power wire in the rear behind the seat area I believe it's tucked under carpet or back wall ... Thought I'd share 😊

    • @TheDrakeArnold
      @TheDrakeArnold 7 หลายเดือนก่อน +1

      not low enough gauge for a decent sub

    • @robsale1488
      @robsale1488 2 หลายเดือนก่อน

      @@TheDrakeArnoldif it has it you can just tap into the speaker inputs.

  • @c24medina
    @c24medina ปีที่แล้ว +1

    I have a 2020 ford f150 with the base stereo no Sony or b&o. The t harness you connected is just plug and play? Do I have to use the remote wire on it? I have the same sub you are installing in this video but I am running the remote wire to fuse 23 on the passenger side. My amp is powered but I get no bass from it right now I have a cheaper t harness from Amazon that was $25 it broke the first day because one of the pods fell off smh. I was hoping the t harness you listed is more legit and better quality.

    • @ProvoBeastAudio
      @ProvoBeastAudio  ปีที่แล้ว +1

      yeah, just plug and play. No remote wire is needed as that rockford fosgate powered usb can turn on for you per the settings on the amp itself. That T harness is untested, but is a simple solution to the install. Alternatively, you can snag signal from the b pillar rear speaker if that works better. Good luck to ya.

    • @c24medina
      @c24medina ปีที่แล้ว

      @@ProvoBeastAudio thank you. I received the plug and play harness attached on the link. I noticed the line out put converter is attached to the rear speaker wires on the harness. Wouldn’t it be better for it to be attached to the front speaker wires?

    • @c24medina
      @c24medina ปีที่แล้ว

      @@ProvoBeastAudio sorry disregard I noticed it’s the front wires after all. Do you make this harness or someone else does? It’s a nice quality harness

  • @popskitchen6513
    @popskitchen6513 4 หลายเดือนก่อน

    @provobeast I installed this in my Camry last week. Can you explain how to connect this amp to a 4 channel amp to run my after market door speakers…

  • @TheArchetypeGamer
    @TheArchetypeGamer 2 หลายเดือนก่อน

    The truck that is being worked on is an 18 to 20 F150. This is not a 16 model.

  • @BL00DRAINE
    @BL00DRAINE 4 หลายเดือนก่อน

    Is it just me or does that look like a 2018-2020F150? The grill doesn't match the 2016 model (I own a 2018 f150 XLT with white and chrome and the exact same grill).

  • @alkemistoner
    @alkemistoner 8 หลายเดือนก่อน

    9:53 Thank you for this video! I’m curious before I buy this setup. I have this basic same system in my 2020 F150. Question is do I just take the old sub out and use those end of the wires to connect to this on hi level input? Do I still need the converter/amp in play for that connection or can I use wires from the other side of the converter/amp? This would be the stock wires and subwoofer kit.

  • @coreysmith6410
    @coreysmith6410 6 หลายเดือนก่อน

    Hey what's a great aftermarket radio to install in 2019 f150

  • @mexifry222
    @mexifry222 10 หลายเดือนก่อน

    Thank you for you this informative video. 👍 I'm curious about the 9:30 mark.
    Am I able to connect this subwoofer to the factory subwoofer for both power and audio signal? Or do I still need to run power up to the battery?
    My thought is to easily be able to take the bigger subwoofer out if I need the space and temporarily use the factory.

  • @caraudiomodificationsloud
    @caraudiomodificationsloud ปีที่แล้ว +1

    Nice🎉❤

  • @buzz_904
    @buzz_904 4 หลายเดือนก่อน

    That spot did not work for me same truck

  • @parkergarman725
    @parkergarman725 9 หลายเดือนก่อน

    Is there a video of installing an lc2i in a 2016 ?

  • @franciscoguzman881
    @franciscoguzman881 ปีที่แล้ว

    How’s tge sound output on these Rockford fosgate combos?

    • @ProvoBeastAudio
      @ProvoBeastAudio  ปีที่แล้ว

      For the size and price per watt with what you get, it's certainly impressive, over any other powered sub in it's class.

  • @itshybrids3136
    @itshybrids3136 11 หลายเดือนก่อน

    This adapter saved me but what do I connect the remote wire too haven’t got the adapter yet but supposed to be here next week can’t wait to hopefully get my speakers set up

    • @ProvoBeastAudio
      @ProvoBeastAudio  11 หลายเดือนก่อน

      This has an auto turn-on feature built into the powered subwoofer. The amp has a switch for remote - switch it to audio, and it turns on for you. No need for a separate remote wire.

    • @itshybrids3136
      @itshybrids3136 11 หลายเดือนก่อน

      @@ProvoBeastAudio so hook it up and it will be good

  • @marc3581
    @marc3581 8 หลายเดือนก่อน

    How would you hook up a LCQ1

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 หลายเดือนก่อน

      Thats a bit more involved. Send me a message on facebook or instagram and I can point you in the right direction

  • @stephennolan6917
    @stephennolan6917 7 หลายเดือนก่อน +1

    I have this exact setup, but have always felt it wasn't tuned properly. I feel that your note on how you set the gains and x-over I'm going to try that and see if it sounds better. Awesome!!!!