Easy to follow - great success - it worked well. Originally I did one key expecting the other key to retain its memory but it didn’t so I did it again and did both keys (pressing the lock button on both) and it all worked well - thank you
Thank you so much for the video. I managed to disable the working fob as I accidentally pressed the button on it first than the non working one, lol. I got it working by watching another video. One thing to note is this worked for me by pressing the 'Lock' button only. Whereas your video says any button which didn't work. Could be because mine is a Zetec and yours appears to be a Titanium.
Thanks for the video. Some cheeky little git got into my MK4. They didn't take anything, but I assume they intercepted the radio signal. Do you know if reprogramming my key like this will lock them out?
Mega useful my fob died for no reason, spent about two weeks unlocking with the key and triggering the alarm when someone opened the door before I got the key in the ignition 🤣🤣
Hey there quick question, my mondeo lay fir a few weeks waiting on brakes to be fixed, battery died and immobiliser active came up, replaced battery but nothing, my husband got it going but I drove it and after fuelling up the immobiliser came back on, and noticed that key I had stopped working, the other key opens it but car still won't start, is that a key problem? Would this work to start the car again? Money is tight just now but I need the car running again, if you have advice let me know thank you
I have the blade and the chip but the original key the remote it’s not working anymore . How can I copy the remote without having a remote ? I have Xhorse
Great explanation thanks. I've subscribed! The only question is where do I buy the key fob? I've seen some on eBay. Will these work or do I need to purchase a genuine Ford part and pay the usual premium? Thanks again
I'm only getting to the beep after the 4 turns off the key but nothing after ordering the remote button. I got a message saying key better low so I changed it. Now I can't get my central locking buttons working.
Never mind. Turns out the sticker was still on the back of the battery😂😂. In my defense the dash gave me a warning of low battery so if there was practically no battery I would have expected some kind of warning. Anyway. Didn't even need to reprogram it in the end.
@@leonaconnolly6391 Im facing the same problem, I have replaced the car battery and this is happening. Please tell me if you have found some solution because your comment is 7 months old🙄
@@outlawgentleman9289 same here. Main battery died (not fob). Replaced main car battery, all ok except afterwards the fob won't lock the car (will unlock).
I just need to be clear which key is being programmed. The one in the ignition or the one in your hand. I've tried this with the existing (original) key in the ignition and nothing happens. Otherwise its a great video. I've already subscribed. Many thanks 🙂
Good man yerself, Was gonna comment that this was BS, but I kept trying and it worked after about 8 attempts, so anyone trying this out,if it doesn't work first try, keep trying, it will work.
I just lost my key, is there a way to do this with a 'blank' key? If I order one online that fits? Also do you perchance know which one I need to order? There's the option of 4d60 and 4d63 with 40 or 80 bit. Any help would be awesome!
Easy to follow - great success - it worked well. Originally I did one key expecting the other key to retain its memory but it didn’t so I did it again and did both keys (pressing the lock button on both) and it all worked well - thank you
Glad it helped
Thanks for this video, very useful and precise, sorted my key, bettery died in key and had to reprogram could not do it, you explain it clearly.
Thank you so much for the video.
I managed to disable the working fob as I accidentally pressed the button on it first than the non working one, lol. I got it working by watching another video.
One thing to note is this worked for me by pressing the 'Lock' button only. Whereas your video says any button which didn't work. Could be because mine is a Zetec and yours appears to be a Titanium.
Glad it helped
Have you tried turning it off and then on again?
Thanks for the video. Some cheeky little git got into my MK4. They didn't take anything, but I assume they intercepted the radio signal. Do you know if reprogramming my key like this will lock them out?
Mega useful my fob died for no reason, spent about two weeks unlocking with the key and triggering the alarm when someone opened the door before I got the key in the ignition 🤣🤣
As I've just got a 1.8tdci myself I think you're videos are very good mate. Will you be doing one for the egr removal and cleaning?
Yes, soon
Hi mate any idea on how to do that on Fors Mondeo MK4 push button start?
Thanks, worked perfectly.
Glad I had a Google before going to the ford garage. Probably saved my £80
No problem 👍
I don't get any bleep on my mk4 2007 when try you procedure...
Hi, how would I do this for a button start mondeo with no key hole please?😅
Hi mate great vid, I only have the key fob with the three buttons on it. I do not have another key. What should I do
Sorry , I’m a idiot I just did it with my only key, working now
Hey there quick question, my mondeo lay fir a few weeks waiting on brakes to be fixed, battery died and immobiliser active came up, replaced battery but nothing, my husband got it going but I drove it and after fuelling up the immobiliser came back on, and noticed that key I had stopped working, the other key opens it but car still won't start, is that a key problem? Would this work to start the car again? Money is tight just now but I need the car running again, if you have advice let me know thank you
Yes I suspect key problem, and may require reprogramming
I have the blade and the chip but the original key the remote it’s not working anymore . How can I copy the remote without having a remote ? I have Xhorse
Nice and simpel explained. Good tutorials!
Glad it was helpful!
Thanks a Question please.I lost my seconf key so only have one.I'm guessing that your instructions will not work with one key
It will work on 1 key
How do I reprogram the keyless type keys
You saved my life, thanks m8 😁
Happy to help
If i buy a new flip key, cut the blade like old one and program it like this it will start the car or need immo programing?
No transponder chip will require programming to your car
@@PaulsTechChannel It can be programed using forscan or i need a special tool like ktag?
Great explanation thanks.
I've subscribed!
The only question is where do I buy the key fob? I've seen some on eBay. Will these work or do I need to purchase a genuine Ford part and pay the usual premium? Thanks again
A second hand key will work, Although you would have to program transponder chip to be able to start engine.
Pls i have a problem i have ford mondeo mk4 1.8 tdci it shows immobilizer and wont start pls help me
Wow, thank you very very much!
You're very welcome!
Thanks, but how to do it with keyless Mondeo MK4 2008 (start/stop), thanks again 🙏🏻
I have the same question
Same!
too
Me 2
same please!.....I love mondeo mk4, but never never never ever keyless/powerstart again 😞Fu.....error "key is not recognized"
I dont know how i did it but it worked. Thanks!
You're welcome!
Can you use a second fob bought off the internet or must it come from Ford?
Yes you can. Although transponder chip will require programming to vehicle, before you can use it to start engine.
I'm only getting to the beep after the 4 turns off the key but nothing after ordering the remote button. I got a message saying key better low so I changed it. Now I can't get my central locking buttons working.
Never mind. Turns out the sticker was still on the back of the battery😂😂. In my defense the dash gave me a warning of low battery so if there was practically no battery I would have expected some kind of warning. Anyway. Didn't even need to reprogram it in the end.
Hi. Do you know how it program key with push start button?
Also interested in this as we had car battery replaced and still unable to use key to central lock the car
@@leonaconnolly6391 Im facing the same problem, I have replaced the car battery and this is happening. Please tell me if you have found some solution because your comment is 7 months old🙄
@@outlawgentleman9289 same here. Main battery died (not fob). Replaced main car battery, all ok except afterwards the fob won't lock the car (will unlock).
А если кнопка старт как его программировать?
I just need to be clear which key is being programmed. The one in the ignition or the one in your hand. I've tried this with the existing (original) key in the ignition and nothing happens. Otherwise its a great video. I've already subscribed. Many thanks 🙂
Both keys were being programmed for central locking. If you only program 1, the other is cancelled out.
Good man yerself, Was gonna comment that this was BS, but I kept trying and it worked after about 8 attempts, so anyone trying this out,if it doesn't work first try, keep trying, it will work.
Bang on
Didn't work for me please help
How to do with a single key?
You can do the same with 1 key.
I just lost my key, is there a way to do this with a 'blank' key? If I order one online that fits? Also do you perchance know which one I need to order? There's the option of 4d60 and 4d63 with 40 or 80 bit. Any help would be awesome!
@@freedomofnow Transponder chip for immobilizer is 4D63 40bit. Chip will require programming to your Mondeo
Ford told my dad it would cost £80 to reprogram his key, I just did it in 7 secs. Cheers bud
They just quoted me £200 for programming lol
I tried this and it unlocked and locked the car but wouldn’t start it 🤔
This video is for programming remote fob for central locking ONLY.
what is this bro
Hasn't worked for me 😢
Hi Pual, i have few questions. Could you leave me some kind of contact?