Nice video. A little tip, you can get the reversing wire through the rubber tubing between tailgate and body simply by spraying the end of the cable with white grease, it makes it really slippery and it will slide through no problem. :)
you are a brave man... removing so many parts with clips outside on snow.... :) good job any way... my camera on MK4 is wired on right side .. there is factory canal for wires all the way to front...
Looks nice and handy, but for removing such many parts to install the wire, personally, I would not bother doing it. I prefer using mirrors for backing up. Good job anyway!
Thanks for the video mate. One thing I don't get with these mondeos though (and this is completely off-topic), is that the demisters, why did they put the buttons so far away from the drivers side, it's like on my newer model I have right now (newer being 2013 reg), they're in the same side basically. I had this same model as well 2008 reg, but yeah I had problems with it lol. Anyway, yeah, thanks for the video.
Nice video. A little tip, you can get the reversing wire through the rubber tubing between tailgate and body simply by spraying the end of the cable with white grease, it makes it really slippery and it will slide through no problem. :)
Thank you, I got the exact same camera as you so this is a great tutorial.
you are a brave man... removing so many parts with clips outside on snow.... :) good job any way... my camera on MK4 is wired on right side .. there is factory canal for wires all the way to front...
Looks nice and handy, but for removing such many parts to install the wire, personally, I would not bother doing it. I prefer using mirrors for backing up. Good job anyway!
Thanks for the video mate.
One thing I don't get with these mondeos though (and this is completely off-topic), is that the demisters, why did they put the buttons so far away from the drivers side, it's like on my newer model I have right now (newer being 2013 reg), they're in the same side basically.
I had this same model as well 2008 reg, but yeah I had problems with it lol.
Anyway, yeah, thanks for the video.
Were you able to activate the screen touch button lights?
Could you link to the boot release/camera unit? having issues finding one to fit the mondeo - can only find them without the release switch... cheers!
Hi! Can you please tell me the article number or how are they called on Amazon or something?
Pls help me
What the video feed cable
I no have pink cable
Same too
@@MrElixx22Were you able to activate the screen touch button lights?
You should have run the cables on the roof of the car because then they would have been more than long enough
No need to do all the wiring - I simply fitted a radio controlled unit to send the signal to the head unit...much much easier...
where did you ground the camera power supply to please
Did you figure this in the end?