Hope this help.. when installing LEDs. They have to be put a certain way.. not like other bulbs where the electricity will flow regardless of the way it comes into the bulb. So if you install LEDs into anything that didn’t come with them you have to test it lets say it don’t turn on than you have to flip the bulb. Cuz the polarity was wrong. They only work one way..
Casper Uchiha /or anyone have no light (that you can't see at night) in regarding to the instrument cluster. ATG & I suggest to replace the two lights (2:09- shown right light) & remove the Blue Film Plastic to get brighter display..than replacing all of them. You can get ATG LED or regular bulbs.
My mom has a 2002 Honda Civic Dx and one of the bulb for gear {D} went out so I replaced it. After I replaced one of the dash boad light for {D} , I put everything back together and after I plugged the yellow clip and blue clip back in the unit , the thermostate gauge needle goes below letter C when I clearly put the needle on letter C not below C - I just don't get it. Please help me out .
This time remove the instrument cluster out. Then remove the front clear plaster cover. Install the plugs back into the back, but don't push everything in nor place screws. Turn on the key & notice the needle. Now, pull out the Needle and adjust back/install.
Try this first: remove the Clear Plastic Cover * Keyed On, needle moving? * With your finger, moves the Temperature Needle up (CW) * Turn off (radio modes), check Needle & repeat
It's good video. tips that you can do to make it a little tiny bit better like when you go from one scene to another scene and it takes you a bit to unclip something,edit your footage so that it shows you unclipping it and releasing it faster without any in between. now if you're like me and narrating while you record, it can be difficult,try not to talk while your unhooking so you can edit the vid before unhooking, and after, my last video, i finally took my own advice, which does take a lot of screen staring. Good job man just keep it up your doing great Im a Ramblin man😉
@@casperz33 Use a DVM (digital volt meter) to check 12VDC to on those bulbs. ATG & I suggest, get the coupon from Harper Freight Tools Buy the cheapest thing at store Uses the coupon to get a free DVM If you needs any help, please ask or reply with your email address.
I didn't put it in a specific way since the dash didn't light up at all so I don't know if it was right or wrong. Sorry for not being of much help. Thanks for watching tho!
@@casperz33 Thanks, i think i have found the french reference (i'm french 🇨🇵)! All result are in english but i see T5 or T10. I think i'm good. Thanks you !
@@the_1n0nly30 The one by the driver's seat I think it's 25 second down if I remember correctly if not there's plenty of manuals online Just type in your Honda Civic year
You do a nice job explaining this task in the video. Good for you!
You could use a magnetic screwdriver to retrieve the screw or to remove it in the first place to prevent it from falling.
Hope this help.. when installing LEDs. They have to be put a certain way.. not like other bulbs where the electricity will flow regardless of the way it comes into the bulb. So if you install LEDs into anything that didn’t come with them you have to test it lets say it don’t turn on than you have to flip the bulb. Cuz the polarity was wrong. They only work one way..
I would like to know. I just got a 1999 Honda Civic lx. I have the same problem.
Casper Uchiha /or anyone have no light (that you can't see at night) in regarding to the instrument cluster.
ATG & I suggest to replace the two lights (2:09- shown right light) & remove the Blue Film Plastic to get brighter display..than replacing all of them.
You can get ATG LED or regular bulbs.
If you guys are installing Led colored lights and they don’t turn on try spinning them around and it should fix it
What size is the bigger bulb with the wire going into it ?
Should be the 194 bulb
What about the light for the gas and temp meter i cant get it open
My mom has a 2002 Honda Civic Dx and one of the bulb for gear {D} went out so I replaced it. After I replaced one of the dash boad light for {D} , I put everything back together and after I plugged the yellow clip and blue clip back in the unit , the thermostate gauge needle goes below letter C when I clearly put the needle on letter C not below C - I just don't get it. Please help me out .
This time remove the instrument cluster out.
Then remove the front clear plaster cover.
Install the plugs back into the back, but don't push everything in nor place screws.
Turn on the key & notice the needle.
Now, pull out the Needle and adjust back/install.
Try this first: remove the Clear Plastic Cover
* Keyed On, needle moving?
* With your finger, moves the Temperature Needle up (CW)
* Turn off (radio modes), check Needle & repeat
Check & pull out the Instrument Cluster
And make sure all those plugs are connected
You got about 5 plugs & those contacts are cleaned
It's good video.
tips that you can do to make it a little tiny bit better like when you go from one scene to another scene and it takes you a bit to unclip something,edit your footage so that it shows you unclipping it and releasing it faster without any in between. now if you're like me and narrating while you record, it can be difficult,try not to talk while your unhooking so you can edit the vid before unhooking, and after, my last video, i finally took my own advice, which does take a lot of screen staring.
Good job man just keep it up your doing great
Im a Ramblin man😉
Thanks! I'll definitely do my best into editing!
@@casperz33 i use adobe premier, its good, but its a lot to remember
Nice video!! You should show us how it look with those blue light
Jaime Figueroa unfortunately my dash lights don't work at all but i will make sure to fix it! Thanks!
@@casperz33 Use a DVM (digital volt meter) to check 12VDC to on those bulbs.
ATG & I suggest, get the coupon from Harper Freight Tools
Buy the cheapest thing at store
Uses the coupon to get a free DVM
If you needs any help, please ask or reply with your email address.
Do you think this speedometer will work for a Honda CR-V 1998?
It works
Is there any specific way you installed the bulbs being positive/negative polarity?
I didn't put it in a specific way since the dash didn't light up at all so I don't know if it was right or wrong. Sorry for not being of much help. Thanks for watching tho!
Thank you so much!!😊💰
Hi, can you give me the name of light ? Thanks for the video
Aqua Blue LED Dash Light 96-00 Honda Civic
@@casperz33 Thanks, i think i have found the french reference (i'm french 🇨🇵)! All result are in english but i see T5 or T10. I think i'm good.
Thanks you !
i replaced all of mine but they do not light up why is this?
Could be your fuse
@@zumiez12ful what fuse box would it be in bc there’s one in the engine and by the drivers feet
@@the_1n0nly30 The one by the driver's seat I think it's 25 second down if I remember correctly if not there's plenty of manuals online Just type in your Honda Civic year
@@zumiez12ful I found the fuse box and the fuse was blown but after replacing the fuse they still won’t come on
@@the_1n0nly30 you tried it at night sometimes there's a sensor they don't come on even with your lights on ? If not then it's your wiring
What size bulbs are they
If I'm not mistaking, one of the is #194 and the other 4 are #74. You can find them at autozone or pepboys
🤟🏻❤️
Gamg gang!
it's your dimmer switch bro
Nah lol that car had some wiring issues almost half the electrical things weren’t working at all 🥲
SKRAP