@@theosaltzman9424 I saw those and also the nrg hubs are solid af and they sure are proud of them. 3x the $ but I suppose it's better than having your wheel come off.
I got that cheap ebay hub too for my momo, screw holes didn't line up and the build quality was awful, id recommend getting something better right off the bat.
I wish I knew about those before I bought that lame 3ga A piler thing. It looks cool and all but I hit my head on it and it's so cheap it just looks like it's about to fall off (even though it is very well secured).
Not sure if you will see this since it’s an old video but I did this light was gone for about a month and now it’s on I tried to reset it and it come back on after I clear it I used a 2 ohm resister
I used a short piece of 2" exhaust tubing to fill the empty space and make the horn contact. The cheap hub I bought cracked upon tightening hub. Got the nrg hub sitting on bench waiting.
Easy, traces the horn wire behind the dash, then tap the horn wire with another extra wire, after that then ground the back of the hub with a paper clip, make sure it’s touching the back of the hub, after that just wire up and connect the wires. Super easy job 👍 you can also find the horn wire using a light tester, once you find the horn, it should honk and make a noise.
Neutron J hey so I have contact from red horn wire to the hub and it honks as soon as it makes contact to the hub how do I fix this it would just stay on honking if I bolted it up this way also the button doesn’t worl
@@Beasttt- if you have the cheap or horn button with the metal thing sticking out of the side, you will have to use black tape to tape it around the metal thing sticking out of the horn button, basically hack it or you can just cut it out.
Neutron J I think it is because my shorthub is a SRK-R130H and I was supposed to get a SRK-130H because the “R” part is race hub and it’s way smaller and does not have a copper backing around it for the connection to stick to on the back. I’d show a picture but u can see the difference in those two parts. Hopefully that is the fix. Different hub.
@@tylerjvenneman8364 Some people don't like to disable their vehicles functions bit by bit over years just so they can install cosmetic improvements. My 98 prelude still has every function and button present and working correctly despite tons of mods. There is something great about that.
@@balloney2175 don’t tell me this guy doesn’t know what ej is if he really said eg lmao 🤣 I really hate it when people don’t know the difference between si em1 ek ej1 ej2, ef, s2k & etc… Errrkss my nerves like tf is going on nowadays wit the Honda fans/owners! Had a guy who owned a b16a swapped ek 4 door say what’s lsvtec & I lost my shit! 😵😵😵😵🤐🤐🤐🤐🤕🤕
Should have gotten the quick release hub! But nice video my brother.
@Survival David guess I need a quick release because my seat is all the way back and I want the wheel closer to me
Those make me nervous but if it moves the steering wheel closer, then I may have to grow a pair and get one too!
@@PBRichfield just buy a spacer
@@theosaltzman9424 I saw those and also the nrg hubs are solid af and they sure are proud of them. 3x the $ but I suppose it's better than having your wheel come off.
I got that cheap ebay hub too for my momo, screw holes didn't line up and the build quality was awful, id recommend getting something better right off the bat.
I just changed my ebay wheel for a nrg last weekend I got the suede also I love it
Thanks for the Tip. Love the DUAL GAUGE CLUSTER POD also. What is that white gauge you added on the right side of the Pod?
I wish I knew about those before I bought that lame 3ga A piler thing. It looks cool and all but I hit my head on it and it's so cheap it just looks like it's about to fall off (even though it is very well secured).
Not sure if you will see this since it’s an old video but I did this light was gone for about a month and now it’s on I tried to reset it and it come back on after I clear it I used a 2 ohm resister
So… is the lubed up contact part of the hub (the back of it) only to create your electrical connections? Or is it lubed for another reason
how could we do it with the resistor underneath by the drivers fusebox? reason i ask is the owner before me took out all srs wiring..
Could you just run a switch and wire into crusie conttol?
well, should i disconnect positive first or ground？
Thats a sweet looking nrg steering wheel.
I used a short piece of 2" exhaust tubing to fill the empty space and make the horn contact. The cheap hub I bought cracked upon tightening hub. Got the nrg hub sitting on bench waiting.
Your lucky it cracked now and not while driving or a small fender bender. Don't use shitty hubs
I installed mine and my steering is now really stiff, I probably messed something up any ideas?
Did you disconnect the black terminal on the battery before you messed with the airbag? Then reconnected it after you removed it?
Yes always disconnect the battery first
Boost gauge with no turbo?
Man I'm still tryin to figure out how u made the horn work lol.
Easy, traces the horn wire behind the dash, then tap the horn wire with another extra wire, after that then ground the back of the hub with a paper clip, make sure it’s touching the back of the hub, after that just wire up and connect the wires. Super easy job 👍 you can also find the horn wire using a light tester, once you find the horn, it should honk and make a noise.
Neutron J hey so I have contact from red horn wire to the hub and it honks as soon as it makes contact to the hub how do I fix this it would just stay on honking if I bolted it up this way also the button doesn’t worl
@@Beasttt- if you have the cheap or horn button with the metal thing sticking out of the side, you will have to use black tape to tape it around the metal thing sticking out of the horn button, basically hack it or you can just cut it out.
Neutron J I think it is because my shorthub is a SRK-R130H and I was supposed to get a SRK-130H because the “R” part is race hub and it’s way smaller and does not have a copper backing around it for the connection to stick to on the back. I’d show a picture but u can see the difference in those two parts. Hopefully that is the fix. Different hub.
It’s Bluetooth lololol
Can I do the same to my Civic DX 1997 2-door/coupe? After you install it, I notice a gap between the installed stuff and where it is installed.
Will that work on a gen 5 Honda Accord?
I have a 94 Honda Civic dx and I’m so lost on how to get the horn to work and the airbag bypass
where’s you get that radio dash kit?
I have a 97 honda accord can u tell me where u got the dash Is bezzle with the gages
We’re you able to keep the factory cruise?
Fuck no
Does the hub come with the steering wheel?
No
Dude how did you make it work even if it’s the wrong year I can’t find it anywhere I got same problem you did but idk how to make it work
Does anyone know of a part that can cover the gap under the wheel ?
Can you keep cruise control with a quick release
All depend of your cruise button is built into the original steering wheel or not
You could’ve just removed the srs bulb out of the cluster
Alex1Down5Up Fr 😂
But the error would still be in the system, so removing the bulb isnt really a fix
The error in the system wouldn't cause an issue. Might not allow the passenger side to deploy but that just saves the windshield
I think theres a yellow plug on the back of the cluster too you can remove
@@tylerjvenneman8364 Some people don't like to disable their vehicles functions bit by bit over years just so they can install cosmetic improvements. My 98 prelude still has every function and button present and working correctly despite tons of mods. There is something great about that.
first time seeing a 19 on a honda. 2002 lug nuts
Hello I was going to ask is this universal hub piece which would go for any model steering wheel
No
What about for a 96 Accord?
Hey do u know how to do the bypass on a 2006 Acura TL airbag conn
what would work on a honda fit gd3?
Can I do this on a 02 rav4?
Damn thats nice
Where can I get a two ome resister
i'm gonna do this but also keep my cruise
Can i get the stock steering wheel please or if anywhere i can buy ?
Will the airbag trick work for a Acura TL?
Depends on the year, after 2003 my guess is no
Wow ❤
Can I just clear the code w my code scanner to get rid of the srs light?
no
Nice edit. 👍#thelatemodeltech
Steering is huge lol🤣
What rims are those ans spec
Will the ek hub work with eg?
the title of this video says "EJ & EK"... didn't you notice?
@@balloney2175 don’t tell me this guy doesn’t know what ej is if he really said eg lmao 🤣 I really hate it when people don’t know the difference between si em1 ek ej1 ej2, ef, s2k & etc… Errrkss my nerves like tf is going on nowadays wit the Honda fans/owners! Had a guy who owned a b16a swapped ek 4 door say what’s lsvtec & I lost my shit! 😵😵😵😵🤐🤐🤐🤐🤕🤕
@@mrtreejunkie ok, if "jar" is the same as "gar"
How much was all that
First time you encounter a 19 on a honda what about the lugnuts
Take the air bag light out 😭I wonder if people do that
first time you've encountered a 19mm on a Honda, huh? lugs on Hondas are 19mm homie.
I don't need my horn in my ej2 I have h22a4
L. I just bought one of those cheap ass hubs to use on my ej8
nrg steering wheeel civic
Get a quick release.
plz dont do it this way ppl to much work just get a nrg short hub