@@h2conner320 Yea compared to other wheels it’s pretty cheap. You can get a 1000€ and above just for a wheel base and spend 100€ to 600€ for the steering wheel itself.
Yeah i think this person thinks that the brake pedal is a bit too hard to press but i dont think he knows that he can just take out the rubber piece in the brake pedal
every pedal does it, its just the dust inside building up, one example would be a ps4 controller, the joystick have stick drifts which makes your character in game move by itself
@@13swims the brake gets harder the more you press it, and that's intentional. It helps you measure your brake usage, 'cause if you brake too much, you're just gonna get out of the track
@@pardolagames8994 more feel for the brakes, yeah it's more accurate but ive read some reviews saying even with both legs they couldn't press the brake to 100% usuage.
@@pardolagames8994 that little pedal takes a lot if force, my 77 with manual brakes, drum rear disc front is lighter than that pedal, I like the rubber piece being there, im considering cutting like 1/4" off of it to make it feel better.
To anyone confused on the problem: The brake pedal still remains “in use” by 6% even after it is not being pressed This I the equivalent to stick drift on a controller however unlike on a controller you can fix this Just take apart the outer case of the pedals and wipe away any dust or stains that might be interfering with the sensors Please look up a guide on how to do this before taking action as one wrong move could cause damage and you will have to buy new pedals 😅
For everyone wondering what's the reason is, it's issue with pedals especially throttle and brake. Since Logitech pedals works with potentiometer it's gets losen or rust. which results in unwanted brake or accelerator input or flickering even though you're not pressing pedal. In this video when accelerator is pressed 100%, the brake is also getting 5% input.
for anyone who is confused he's on about the potentioners in the pedal box they have a tendancy to fail and will affect gameplay as to either randomly applying the brakes or the throttle having a spaz if you have this probablem go to 3drap as they have a potentionmeter replacment kit which replace the potentioners (requires time)
Same problem? Try opening the wheel and disconnecting all the additional ground cables on the pedal chassis. Leave them disconnected, tape with electrician's tape, reassemble. 👍
You need to remember when having Any kind of steering wheel, you have to do some maintenence from time to time. Just oil it abit. A small amount will do
For all people who have or are interested in buying a g920/g29 I have a few things to say. I got a g920 and for the budget is an amazing set up, but only for some players. Since I don’t have an Xbox or a PlayStation (g29 is for a PS system) I had to play on pc. I played it on a Mac book pro and it worked fine but with a 11 OS update (13 doesn’t work I tried trust, it was stuck on loading resources and after a lot of research I found the best solution it so buy a different setup) and the 11 worked great. But then I ran it on windows and it viewed the g920 as a mouse and not a controller. This problem is able to be solved but when steering to the right it would be very tight and then going left it would be smooth. I had a few other problems but the wheel is really nice itself, the ghub system is faulty and the drivers need to be updated after, but I personally am going to sell the g920 and get a t300 or an moza r5. But the peddle thing with the brake all you have to do it unscrew a ton of stuff and then take out a little black rubber thing inside of the brake chamber with the spring. The rubber “stopper” is to simulate resistance but I don’t like it so I just removed it, only took like 10 minutes and feels nice after.!
Depending how old these are they are based on a physical contact system to measure force and distance and can get durty or damaged over time. Could be he needs to clean it or they are worn
Common issue. Logitech should've put brush-like protectors at the base of the pedals so dirt cant get into the open gaps, the dirt ruins the sensors for the pedals making it malfunction
Bruh what’s your issue? I’ve seen a lot of people talk shit on this setup and when they give their reason it’s something tiny that can be fixed easily 🤦♂️
I did the same thing in the same game after watching the video, its a you problem. The G920, G923, G29, whatever more there are, are really good for the price.
TH-camrs try endlessly to underestimate products to the benefit of buying more expensive items for those who do not give a sh*t, thats a good reason to never take advise on youtube but get entertained by whatever.
I see what the issue is every time u pressed the gas.... the brake was also applied 2% or more T times with out u actually pressing the brake.. which can be an issue if your tryin to win a a race but u slightly slower cuz the brake is on
Hey bro if you're having an issue with the power staying at 100% when your feet's all the way down I recommend opening up the bottom case for the foot pedals and clearing out all that dirt and grime that's on the electrical connectors
So no one sees the brake pedal acting up? That's a potentiometer issue, EVERY potentiometer (pot) based pedals have this issue, not just those pedals. My pedals (the regular Thrustmaster plasitc 2 pedal set) also has the same issue, I'm using it as an excuse to get a new wheel since mine doesn't even have force feedback
You aren't pressing it down as far as it goes. Their is a rubber knob in it that makes it hard to press. It is dumb you can take it out . You have to press it super hard
Dust off your pedals,the potenciometers are sticking,its comon bcs they collect dust. Use a contact cleaner and spray it on the pots,you should be good then. I had the same problem 2 times before,good luck!
@@AjStudioGameplay Yeah 2 times in the first couple of weeks when i bought the wheel . 3k hours on the wheel now so far ,the leather on the wheel desintigrated of use ,but knock on wood pedals are working still. Wd 40 did the trick for me,but i would advise a contact cleaner,bcs wd 40 can be abrasive to plastic parts. Im using them on a rug,so yours should be more dust free so if the problem is that common maybe try to disasemble them and do a deeper clean iff something is stuck in the potenciometers. Hope you sort things out,good luck.
I just got a reverse pedal kit and with this reverse pedal kit mod if the sensor gets dirty i cant just pour some 91% alcohol on it which is exposed and let it dry and its back like its brand new
what is the issue, if you are talking about the brake pedal going only half way, there are a bunch of options, number one, get friends, number two, watch a youtube tutorial
You do realise you have to adjust sensitivity level on throttle and brake to match wheel? Lots of different wheels. Different pedals. Check your settings my guy.
I have a Logitech G29, and they are not the best of wheel setups. For example, the controls are very limited and the pedals always flicker. At some point, I hope to get a Thrustmaster T248 as it has more controls and the pedals don’t flicker.
Or your pedals are broken and you just don't know how to make a simple review? With the quality of Logitech products now, I have a hard time finding issues with them
Also dont sit so far back. Your full on just toeing the accelerator 😅 How can you expect to get 100% brakes or anything when your just basically using your big toe 😂 Dont rest your heels when using clutch etc you will wear out your pedals and shoes. Only rest when doing long straights etc
Bruh, ever heard of a loadcell? Yeah, this thing doesnt have any. That means its way easier to press the brake all the way, compared to high end pedals...
I like the part where he explains why you shouldn't buy it
the brake sometimes doesn’t fully disengage / engages in its own when the accelerator is pressed
Just open up the dead zone by a few clicks right?
@@jeffreytenthije that is not good for racing but you can fix this by clening pedals every month
The brake is harder to press than the Accelerator. Grey socks is so weak he couldn't use any muscles to press harder.
@@jeffreytenthije exactly. Change the settings. Grey socks is a mongo
Either increase the dead zone or give the potentiometer a clean
How do you increase the dead zone
By being not a retard and checking google
That's what I was thinking deadzone
I don’t really see what your issue is, I have a g920 and it surprisingly works pretty well for how cheap it is
CHEAP?
@@h2conner320
Yea compared to other wheels it’s pretty cheap.
You can get a 1000€ and above just for a wheel base and spend 100€ to 600€ for the steering wheel itself.
Yeah i think this person thinks that the brake pedal is a bit too hard to press but i dont think he knows that he can just take out the rubber piece in the brake pedal
Me too
@@h2conner320 get your stacks up buddy… smh broke
every pedal does it, its just the dust inside building up, one example would be a ps4 controller, the joystick have stick drifts which makes your character in game move by itself
I think he thinks the brake is to hard but he can simply take out the rubber block to fix this problem, no big deal. 🤷
@@13swims the brake gets harder the more you press it, and that's intentional. It helps you measure your brake usage, 'cause if you brake too much, you're just gonna get out of the track
@@pardolagames8994 more feel for the brakes, yeah it's more accurate but ive read some reviews saying even with both legs they couldn't press the brake to 100% usuage.
@@13swims weaklings
@@pardolagames8994 that little pedal takes a lot if force, my 77 with manual brakes, drum rear disc front is lighter than that pedal, I like the rubber piece being there, im considering cutting like 1/4" off of it to make it feel better.
still waiting for a reason
Tf get a good wheel
Watch the video
@@horizonsuperstar2209Ok, now what
This happens with a lot of wheels you gotta jus clean it
What do you mean by clean it
I just got mine brand new and it did this out of the box I just set the deadzone higher
@@thatcaptain7347 it's the rubber piece in the brake pedal. I removed it and my brake works fine now.
@@hukalakanakahakanakaheekal2429 Please answer me, how can I remove rubber piece in the brake pedal ????????
@@marijanklimkarov9930 watch a review on how to take the pedals apart.
I got this at the beginning of my sim racing journey and although it isn’t as good as a moza, it is the best possible starter and is built very well.
Leg day be like
😂
To potential buyers: your individual experience may vary, at least I would hope so.
Totally agree with you
Literally watch the HUNDREDS of TH-cam videos or read for five minutes on how to clean the sensors. Lmao.
It's not a problem with it at all. You messed up something while playing. Change your settings until the problem is resolved.
To anyone confused on the problem:
The brake pedal still remains “in use” by 6% even after it is not being pressed
This I the equivalent to stick drift on a controller however unlike on a controller you can fix this
Just take apart the outer case of the pedals and wipe away any dust or stains that might be interfering with the sensors
Please look up a guide on how to do this before taking action as one wrong move could cause damage and you will have to buy new pedals 😅
"Why you should blow the dust out of your pedals"
For everyone wondering what's the reason is, it's issue with pedals especially throttle and brake. Since Logitech pedals works with potentiometer it's gets losen or rust. which results in unwanted brake or accelerator input or flickering even though you're not pressing pedal.
In this video when accelerator is pressed 100%, the brake is also getting 5% input.
If your point is that the brake pedal is too hard too press this is because it’s what it’s like in an actual car
Easily solved with dead zone for brake pedal, or you can mod the pedal. It's not complicated either way.
for anyone who is confused he's on about the potentioners in the pedal box they have a tendancy to fail and will affect gameplay as to either randomly applying the brakes or the throttle having a spaz if you have this probablem go to 3drap as they have a potentionmeter replacment kit which replace the potentioners (requires time)
Same problem?
Try opening the wheel and disconnecting all the additional ground cables on the pedal chassis. Leave them disconnected, tape with electrician's tape, reassemble.
👍
You need to remember when having Any kind of steering wheel, you have to do some maintenence from time to time. Just oil it abit. A small amount will do
Increase the brane pedal deadzone, then. I’ve bought mine for like 150$ used and it’s still working perfectly fine after 2 years
Adjusting your dead zone will help The 6% Hang up on the brakes!
Why you shouldn't buy a product video: -proceeds to not explain anything-
Look the gas and brake bars and you would understand
@@transitionfpv6707 Some people may not know what he's doing.. I certainly do.. But an *explanation* (wow whats that???) would help.
For all people who have or are interested in buying a g920/g29 I have a few things to say. I got a g920 and for the budget is an amazing set up, but only for some players. Since I don’t have an Xbox or a PlayStation (g29 is for a PS system) I had to play on pc. I played it on a Mac book pro and it worked fine but with a 11 OS update (13 doesn’t work I tried trust, it was stuck on loading resources and after a lot of research I found the best solution it so buy a different setup) and the 11 worked great. But then I ran it on windows and it viewed the g920 as a mouse and not a controller. This problem is able to be solved but when steering to the right it would be very tight and then going left it would be smooth. I had a few other problems but the wheel is really nice itself, the ghub system is faulty and the drivers need to be updated after, but I personally am going to sell the g920 and get a t300 or an moza r5. But the peddle thing with the brake all you have to do it unscrew a ton of stuff and then take out a little black rubber thing inside of the brake chamber with the spring. The rubber “stopper” is to simulate resistance but I don’t like it so I just removed it, only took like 10 minutes and feels nice after.!
Just put a lower final deadzone. Not that big deal for a unexpensive wheel.
I like my G29 and I’m not switching anytime soon😂
It's easy to fix if you sprinkle competence on it
Depending how old these are they are based on a physical contact system to measure force and distance and can get durty or damaged over time.
Could be he needs to clean it or they are worn
I got mine second hand and haven't had this issue. You must just have faulty peddles
you can change the pressure of the brake pedal in the g hub i seen video about it (Karl goslin has a video how to do it)
I don’t understand the issue here, don’t make a complaint about something before making sure that something’s actually wrong.
tyou can calibrate the brake pedal and when you calibrate it, it will work (dont ask me how becase i dont know)
Common issue. Logitech should've put brush-like protectors at the base of the pedals so dirt cant get into the open gaps, the dirt ruins the sensors for the pedals making it malfunction
the only issue is I hate ppl that don't drive with shoes on
Bruh what’s your issue? I’ve seen a lot of people talk shit on this setup and when they give their reason it’s something tiny that can be fixed easily 🤦♂️
I’m convinced this was to show off the dawgs
Do you have a drivers license? You never brake with your left foot....
I did the same thing in the same game after watching the video, its a you problem. The G920, G923, G29, whatever more there are, are really good for the price.
I think he doesn’t like that you can’t really press the brake all the way down unless you mash it.
I inverted mine and its the best thing I could have ever done.
You could easily invert yours with that set up.
Just open the brake pedal under the cover and remove the rubber block inside the spring
That happens when I look at my controller stick values too it's definitely a possible fix and or doesnt effect my gameplay enough
TH-camrs try endlessly to underestimate products to the benefit of buying more expensive items for those who do not give a sh*t, thats a good reason to never take advise on youtube but get entertained by whatever.
I see what the issue is every time u pressed the gas.... the brake was also applied 2% or more T times with out u actually pressing the brake.. which can be an issue if your tryin to win a a race but u slightly slower cuz the brake is on
Lol mines perfect 😂😂 had it for 3 years no issues, if your on a pc turn off combined pedals you nerd
I had that problem, I got it of Amazon, and so I said I want a replacement and I got it the next day with absolutely no fees whatsoever
If ur complaining about break pressure get over it’s like butter compared to pressure cells that need way more force
Hey bro if you're having an issue with the power staying at 100% when your feet's all the way down I recommend opening up the bottom case for the foot pedals and clearing out all that dirt and grime that's on the electrical connectors
This is interesting 🤔. So the accelerator doesn't Stay at 100% open throttle which kinda sucks.
So no one sees the brake pedal acting up?
That's a potentiometer issue, EVERY potentiometer (pot) based pedals have this issue, not just those pedals. My pedals (the regular Thrustmaster plasitc 2 pedal set) also has the same issue, I'm using it as an excuse to get a new wheel since mine doesn't even have force feedback
Thats why you shouldnt use throttle and brake at the same time
You aren't pressing it down as far as it goes. Their is a rubber knob in it that makes it hard to press. It is dumb you can take it out . You have to press it super hard
Dust off your pedals,the potenciometers are sticking,its comon bcs they collect dust. Use a contact cleaner and spray it on the pots,you should be good then. I had the same problem 2 times before,good luck!
Thanks. That's exactly what I have to do. You had this 2 times only? I have to do this like once every week.
@@AjStudioGameplay Yeah 2 times in the first couple of weeks when i bought the wheel . 3k hours on the wheel now so far ,the leather on the wheel desintigrated of use ,but knock on wood pedals are working still. Wd 40 did the trick for me,but i would advise a contact cleaner,bcs wd 40 can be abrasive to plastic parts. Im using them on a rug,so yours should be more dust free so if the problem is that common maybe try to disasemble them and do a deeper clean iff something is stuck in the potenciometers. Hope you sort things out,good luck.
This happened to me straight out the box
Over sometime the pedals get worn, adjust your outer threshold and live your life.
There's a stupid rubber stopper inside the pedal you have to remove yourself. After that little mod it works great.
I just got a reverse pedal kit and with this reverse pedal kit mod if the sensor gets dirty i cant just pour some 91% alcohol on it which is exposed and let it dry and its back like its brand new
ive got the g29 works perfectly even after a long time of using it pretty roughly
thats a good part when he tells and explains it omg i love it
Probably fix the circuits inside the pedals.
Same here, brake is OK, but Gas is just like yours. Recently using a T300RS
what is the issue, if you are talking about the brake pedal going only half way, there are a bunch of options, number one, get friends, number two, watch a youtube tutorial
he needs to clean the potentiometers
Could have a little dust build up or something in the sensors
Sounds like a you problem🤷♂️
well thats what happens when you torture the cable
You do realise you have to adjust sensitivity level on throttle and brake to match wheel?
Lots of different wheels. Different pedals. Check your settings my guy.
I watched this video then bought a G920 just to spite this guy. Works perfectly fine, clean your sensors.
Get the AXC Truebrake and AXC potentiometer upgrade kits for the clutch and accelerator. Best upgrade for a logitech pedal set.
Spray the pots with electric contact cleaner. I have to clean mine every session
haha, i brought second hand and more error, pedal is ghosting, and just spray Contac Cleaner on Potentio in pedal, and its back to normal again
You have just to clean the potentiometers...
this brand is a shame for simracing💀
Have mine for over 6 years and I have no problems
Common problem and easy to fix, just clean up the potensiometer
I have a Logitech G29, and they are not the best of wheel setups. For example, the controls are very limited and the pedals always flicker. At some point, I hope to get a Thrustmaster T248 as it has more controls and the pedals don’t flicker.
Am I the only one who doesn’t understand this or am i dumb
Happend to me after about a year of owning it
It’s called calibration
I tell you the easy fix try open the top cover and you will see the pedal sensor so try twist the sensor and that's it it should be as good as new...
Get the aftermarket brake load cell kit
this is adjustable if i'm not mistaken
Or your pedals are broken and you just don't know how to make a simple review? With the quality of Logitech products now, I have a hard time finding issues with them
Personally whatever problem you have is your problem because I've had my logitech g920 for a while and I've had no problems with it
Wer gibt bitte schön Gas und bremst gleichzeitig 😅😂😊
Your gas pedal is upside down.
I even bought mine used, it works perfectl fine
Same lol some dude was selling his on Facebook for 150 what a steaaaal
Watch a video to take the block out of the brake
I only got mine for 105$ and its good how cheap it is compared to thrustmasters/others 🤷♂️
My t300 broke last week now I'm in the market for something affordable is this wheel ok?
@@Joseph-yo9ns Logitech g29 / 920, are the best, cheap
Also dont sit so far back.
Your full on just toeing the accelerator 😅
How can you expect to get 100% brakes or anything when your just basically using your big toe 😂
Dont rest your heels when using clutch etc you will wear out your pedals and shoes.
Only rest when doing long straights etc
G923 doesn't give me that problem tbh
It’s the potentiometer
Hey man, you probably won’t answer, but if I buy a drive hub, can I connect this to my ps4? Thank you so much if you answer me!
If i understand correctly, the g29 works fine on PS but g920 works on Xbox so idk
It’s not plugged in all the way having me plugged in all the way fixed it
That's why games have pedal deadzones
clean the potentiometer that will fix the problem
Whats your problem?
Bruh, ever heard of a loadcell? Yeah, this thing doesnt have any. That means its way easier to press the brake all the way, compared to high end pedals...
You’re pressing the clutch not the brake
Contact cleaner on the potentiometer and you salve the problem
Yours must have a problem I have had mine for a year now and no problems at all I rate it a 10/10
Why is your excelerator pedal upside down