Should be call The tool First? G43 H( High of the tools). Rxemple : T0101 = G43 H01 -----------> INPUT IN THE MDI -----> Cycle Star ------> Now the tool called down!!! after start to Setup the data Z G54. Is ok Sr?
00:10 Easy Job Setup Intro 00:51 Using the Spindle Nose as a Reference Tool 01:12 A Few Inexpensive Instruments 01:25 Task 1: Measuring X and Y WCS Offsets 04:58 Task 2: Measuring Z and Y WCS Offset 06:35 Task 3: Measuring Tools Using the Spindle Nose Reference Method
7:46 you can read current machine coordinate in program. you know z lenght of macine. you know vise heigt. left over is tool lenght. make custom makro mased on those. and you can measure tool on MDI write your own gcode like G100. how easy
WHY IT IS CONFUSING WHILE TAKING X Y OFFSET U USED EDGE FINDER ,AND IN Z AIXS OFFEST WHY U MOVED SPINDLE ON Z AXIS ,IT IS LITTLE BIT CONFUSING ,IS IT NOT POSSIBLE BY EDGE FINDER WORK OFFSET ?????
very excellent. This tutorial is good beacuse of this video is very short, useful and visualisation than other videos.
4:41 should that be Y0.1 or is y axis setup difrent UNNORMAL way on this machine
agree
also agree!
I looked for anyone else noticing this. Yes it should of been positive.
This was driving me crazy, thanks.
It should be posative
Should be call The tool First? G43 H( High of the tools). Rxemple : T0101 = G43 H01 -----------> INPUT IN THE MDI -----> Cycle Star ------> Now the tool called down!!! after start to Setup the data Z G54. Is ok Sr?
I need to know how to setting number of tools position, Please help!
00:10 Easy Job Setup Intro
00:51 Using the Spindle Nose as a Reference Tool
01:12 A Few Inexpensive Instruments
01:25 Task 1: Measuring X and Y WCS Offsets
04:58 Task 2: Measuring Z and Y WCS Offset
06:35 Task 3: Measuring Tools Using the Spindle Nose Reference Method
7:46 you can read current machine coordinate in program. you know z lenght of macine. you know vise heigt. left over is tool lenght. make custom makro mased on those. and you can measure tool on MDI write your own gcode like G100. how easy
very very good sir. highly appreciated.
WHY IT IS CONFUSING WHILE TAKING X Y OFFSET U USED EDGE FINDER ,AND IN Z AIXS OFFEST WHY U MOVED SPINDLE ON Z AXIS ,IT IS LITTLE BIT CONFUSING ,IS IT NOT POSSIBLE BY EDGE FINDER WORK OFFSET ?????
Yes but you need a different style edge finder
You do not declare tool diameter in the tool offset?
Wouldn’t it be in the program?
This helped me alot
What the ex 1050 and ex 1070 alarm solution
Thanx sir. Greetings from Russia
Thank boss...
Super helpful. Thank you.
Thish helped me alot
God sir ji video upload
nice
Wery helpful
nice v
Пожалуйста, на русском.
this ain't russia
извините, это не россия
this you tube.