This technique is not taught in any school, making additional tools for lathes
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2023
- #lathe #creative
This technique is not taught in any school, Making additional tools for lathes
machining lathe techniques that are not taught in school, turner creative ideas
The creative idea of a turner when he gets a job that requires special lathe techniques,
You should know this machining lathe technique so that you are smarter than other craftsmen
Lathe
Lathe techniques
Creative idea
Making tools
Welding
TIG welding
Gear
Thank you for visiting, don't forget to like and subscribe for support, thank you
Давайте не будем строго судить, товарища! Человек делает, что-то из ничего, а это стоит уважения, как минимум. Уверенно ставлю лайк!!!
Да чего сразу судить то?
Видно же что -Товарисч- возможно из арабских стран.
Там где механизация и производство не внедрялось так массово как на бывшем постсоветском пространстве.
Или вам не видно по характеру исполнения?
А то что у них в школе такому не учат но то их личные проблемы.
Такому в школе никогда и не учили...
Максимум тв 4, и то под присмотром трудовика.
Остальное в Путяге.
( или во время ВОВ - когда школота за пром станками работала).
user, well said, thank you
Hace 30 años en México en el IPN Vocacional haciamos en el taller de maquinas herramientas en una practica un punto giratorio así como lo exxpresaron en eel video! Saludos a los que saben y llegaron a hacer trabajos de este tipo.
don't let the internet jerks grind you down or talk bad about you......your videos are informative,
and helpful.....I wish I could send you more , I hope this may help...Paul in Florida, USA
Thank you very much friends for your gift🙏🙏👍👍
Just because you can it does'nt mean you should...
There is a fair bit of hatred towards the butchery on display but looking at the background this guy does not have the air conditioned level workshop floor and all the accompanying western goodness that I personally have with all my lathes ,mills grinders tooling etc. I suspect he would be more likely to drive out of the desert after a breakdown than many of his detractors? My favourite old English saying is an engineer is someone who can fix something for 2 shillings that any fool can fix for a pound.
Nice tooling, very smart machinist.
did anyone else notice he broke off his center drill at 1.10
And that is exactly why the parts never fit other machines. LOL!
That thumbnail photo was uncalled for- not representative of the content.
OTOH I love the cleverness. I watch these videos just to see what you can get away with- both in terms of what you can make or do that works at least somewhat, and the level of safety that is seen as acceptable in other cultures.
If I were making fundamental parts like Morse Tapers, I would want to make them with less worn equipment with a better surface finish, to ensure that their product was good enough for me to count on. Dude's making pretty rough stuff. But he uses it successfully all day to fix whatever people bring in, so it's good enough for him.
Переходные втулки, вращающийся центр, сверлильный патрон - всё вперемешку с песком прямо с цементного пола! Отлично!
Usinagem é sempre um trabalho fantástico 👏👏
Obrigado
Спасибо за ролик!
well done....thank you
Click Bait??? So, why was your entire grinder station being held between centers?
Wakodahatchee Chris
Yes you are right my friend trying to get more likes to get more money from TH-cam:-(((
He got me thats the whole reason I watched lol
I wish I can do something like this, good work 👏
Based upon the intro I thought this was a video about precision grinding your morse tapers in a concrete mixer with a dozen standard boulders.⚙
it was !
I'm not sure why you would think that. The boulders are CLEARLY metric. 🙄
Brilliant ideas! Welcome👍👍👍
I have learned new ideas thanks very much
Click bait, the grinder has nothing to do with this video
+rep
Thanks. You saved me time
Thanks for the tip off. Moving on and saving time.
The worst part is the video wasn't that bad, it didn't need the click bait bs anyway. That just pisses people off.
Thanks as others have said don’t need to waste my time 👍
Nyimak ikutan belajar bang🙏
subscribed!
Thanks
Nice trick
I’d use my Jones & Shipman cylindrical grinder on the taper and my vertical mill for the flats. Most of all, I’d use the FOUR JAW CHUCK instead of the.bloody three jaw!
Wonder if needing to make new tools is related to the accidentally cutting the Jacob’s chuck with that fly cutter…..
Cool work thanks 👍
And here I am complaining about pioneer stuff lol Man my boss would love you
походу, у них законом запрещено иметь любой вид микрометра и казнь за нарушение этого закона. Иначе, он просто бы умер посмотрев на точность
CLICK BAIT
what does this have to do with the bench grinder between centers in the beginning of the clip?
Токарные резцы в той школе явно не учат затачивать. И о шлифовальных головках, идущих в комплекте к станкам конечно тоже никто не догадывается.
Единственные существующие в природе токарные станки, по заводу комплектовавшиеся штатными приспособлениями для шлифовки, - это наши ублюдочные кунговые станки, которые делали для армейки с единственной целью: наварить бабла на военном госзаказе!
I knew this was a "dumb-ass" technique when I saw the phrase, "not taught in school". He puts his tools on the concrete floor and performs dangerous proceedures with his lathe.
Got him!!
Чему тут не учат в школе? Это что ты сделал сделает и двоечник. Или ты тоже двоечник?
а не проще было к конусу Морзе (ненужному) приварить болванку и сделать то что вам надо
1:11 The center drill just went to hell.
Creative video, thanks :)
Bikin reamer bisa ya gan
Круто 👍
Thank you
1:11 Broken drill
This, and other videos from this creator, are demonstrations that it pays not to be prissy, insisting that everything be just so before attempting something. With manual machinery, we are frequently faced with the need for fixturing and toolholding we don't have a ready answer for.
The naysayers here are very likely to have to buy lots of extra stuff for weird jobs, or refuse them. This guy will cut and pound a concise solution that will get the job done while the rest of y'all are stuck in negativity.
Nao é tecnologia,são simples arranjos de oficina.
Great job - Well done !
No protege la bancada eso es todo abrasivo.. que lastima destrosa el torno.
Un broquero es para brocas no para fresas o cortadores...se enchueca el broquero
El cono merse tiene 1,5 grados
3 разряд токаря, не более.
Wow that's some seriously beat up equipment. And yes, sometimes there's a reason something is not taught in school.
🙏👍👍
Me cansé de esperar la técnica que no enseñan en la escuela pero se acabó el vídeo creo no alcanzo a subirla, 😂
Muito obrigado
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Вот только в шортах и шлёпанцах стоять у токарного станка.
Ну что с них взять - Азия: ни ватника не купить, ни кирзовых сапог ((((
Make yourself a lathe milling slide. You will have a much easier time! Trust me.
as a machinist this hurts my eyes
Saya dapet job dngan ini mas tpi msih ksulitan bhan2 nya bru kelar untuk mesin tnggal transmisi mohon pencrhanya mas untuk dibantu
Bisa pesen as pres GK mas
에궁! 다아는데~~~
Ma perché usi il trapano?
👍👍👍👍👏👏👏👏
🙏👍👍
Что ж у всех «мастеров» инструмент то такой убитый? 😜
❤❤❤❤
Как угол выставил?
этой технике точно не учат в школе
возьми нормальный инструмент валенок
Без индикатора, конус Морзе не поймать
Задняя бабка скачет, съём с последовательных проточек не равномерный, фреза из болта...Мда...
Ну это лучше чем ничего. )
It makes me grateful for Amazon to be honest. One click, $20 USD, and 3 days later…only technique needed is package opening.
🙏😄👍👍👍
Diameter max, .937, Diameter minutos, .780, sistem usa, is better to put a carbride in the end, migh hardener before to grinder
Oke thank you
Judul,nya mengerikan
Zum Glück wird so etwas nicht beigebracht.
Alleine schon die Funken wo gegen die Pappe prasseln. Kein Wunder steht die Maschine draußen...da brennt sonst die Bude ab. Nene, besser nicht nachmachen.😆
Mas berapa derajat tirusnya... ga kelihatan 🙏
1,8drajat bang
Itu 1,8 drjt dari mana bang ?
Sudut tirus itu standar, untuk tangkai cak bor tirusnya 1 : 20 .
Klo derajatnya 2,862 drjt , eretan atas tirusnya setengahnya yaitu 1,431 drjt. Saking presisi tiga angka blkng koma ( seperseribu drjt )
Klo diurai mnjadi 1* 25' 56" atau 1 drjt , 25 menit , 56 detik.
Itu bisa dilakukan dengan bantuan dial indikator dan test bar.
Pedomannya adalah perbandingan tirus 1 : 20 .
Make better then all russian diy creators
В середине семидесятых годах делал конуса подгонял по калибрам втулки конус проверка на карандаш сопряжение
Просто мы в космос готовились, а им видно и тут хорошо
ROUGH !!!!
I was going to watch this but I can’t stand all this finger waving
😵💫
Костя Дзю
Those poor tools are so abused 😢.
Poor lathe is all I can say, great ideas but accuracy must be miles off.
ни о чём
Конуса с патроном сверлильным от прадедушки достались.
Такому нельзя учить!
Жесть..
ЧЕЛ ЭЛЕМЕНТАРНО НЕМОЖЕТ ЗАТОЧИТЬ РЕЗЕЦ И ФОРТУНОЙ ДОВОДИТ ПОВЕРХНОСТЬ ЭТО УЖЕ НЕ СМЕШНО ,ЕСЛИ ЧЕСТНО ТАКОЙ ХУЙНЕЙ СТРАДАТЬ НЕ СЛЕДУЕТ.И НАКОНЕЦ ПУСТЬ СПЕЦИАЛИСТЫ ПОМЕНЯЮТ ПОДШИПНИКИ НА ШПИНДЕЛЕ У ТОКАРНОГО СТАНКА И ЛЮФТЫ ВЫВЕДУТ ЕСЛИ УЖ ИЗ ПОД РЕЗЦА ЧАСТОТА ПОВЕРХНОСТИ НЕ ПОЛУЧАЕТСЯ.ТАКОЙ ИТОГ.
jeez what a butchery job!
И тут дедушки пабили всё малаточком. Афтару не мешало бы книжку прочитать и не совать в станок побитые конуса с задирами. Жду видео шабрения направляющих станка зубилом и балгарочкой.
А тебя в школу отправить в третий"Б" )))) ЭЭХ!!!! " аФтору"
@@user-bj4nm8bt1p О, а вот и последователь дедушек, которые малаточком болты закручивают и зубилом сегментные гайки зажимают.
Дикари
Плакать хочется... th-cam.com/video/WI3dzfvTi5U/w-d-xo.html
Голь на выдумки хитра...
travail de gros cochon !!!
Shit
конус морзе идея хорошая !!!!!!!
За то что превью не соответствует видео, дизлайк и исключить из рекомендаций
Tercermundista, de la época del Neardental
Потому,что такому дебилизму не учат в учебных заведениях!