Great video I’m actually doing the same job was putting the supercharger back and on the drivers slide at the back of supercharger I connected the coolant pipe and the electrical sensor but on the passenger side I can’t seem to find or remember what plugs in to the port at the back
Great video, thank you! Do I need to take off the whole supercharger just to change the coupler ? Or will I be able to remove the snout without removing the supercharger? Thanks
@@xuehaotan9292 paint marker from Amazon. Once bolt is torque to spec it always gets a Green mark to make sure . On connectors they all get green marks also to make sure nothing is missed upon re-assembly.
Hey man great video. Quick question, Do you have to replace all gaskets no matter what? Or is it just a good thing to do . I ordered all these parts but forgot gaskets i’m wondering if i should. Thanks
@@E39M5SPEED Thanks for the swift reply brother. Have evrything ordered coming tmr. I havent done anything like this before but am taking this challenge on tomorrow. Before i start removing everything, do i have to take the coolant out from somewhere? i was lookign to completely empty all the coolant and replace it with a different one as i couldnt find the original brand thats currently being used. Thanks again
@@therealcyrus lower radiator hose. Remove it. Coolant will drain. Make sure to only use OE Land Rover coolant ! Not aftermarket. 50/50 mix with distilled water.
@@E39M5SPEED yo bro please help, i got the csr back together but no cooant flush i cant drain it please help me find the drain location last thing i need before finished with car
Subscribed!! One of the best videos on youtube! From camera angle to explanation to every details... couldn;t be better.. Thank you so much... Also, would you happen to know what is causing this noise on my RRS V8 Supercharged th-cam.com/users/shortspFXDfNHlTG8
Excellent Job! This is a great video with plenty of dealer spec information.
Perfect work. Thanks for manual screenshots...
Great video I’m actually doing the same job was putting the supercharger back and on the drivers slide at the back of supercharger I connected the coolant pipe and the electrical sensor but on the passenger side I can’t seem to find or remember what plugs in to the port at the back
Great video, thank you!
Do I need to take off the whole supercharger just to change the coupler ? Or will I be able to remove the snout without removing the supercharger? Thanks
Nice video here, very helpful for my jaguar work. Just wondering what marker you are using on the bolts (green one) and why you are using them
@@xuehaotan9292 paint marker from Amazon. Once bolt is torque to spec it always gets a Green mark to make sure .
On connectors they all get green marks also to make sure nothing is missed upon re-assembly.
What is the plug behind the driver super chager? I pulled it up without some how unplug it. I can't do it? 2017 range rover 3.0 sport
Very good thanks from germany :-)
Hi, thanks for the vid. Could you tell me the torque for all the screws? Thanks in advance.
Hey man great video. Quick question, Do you have to replace all gaskets no matter what? Or is it just a good thing to do . I ordered all these parts but forgot gaskets i’m wondering if i should. Thanks
@@therealcyrus Everything.
@@E39M5SPEED Thanks for the swift reply brother. Have evrything ordered coming tmr. I havent done anything like this before but am taking this challenge on tomorrow. Before i start removing everything, do i have to take the coolant out from somewhere? i was lookign to completely empty all the coolant and replace it with a different one as i couldnt find the original brand thats currently being used. Thanks again
@@therealcyrus lower radiator hose. Remove it. Coolant will drain. Make sure to only use OE Land Rover coolant ! Not aftermarket. 50/50 mix with distilled water.
@@E39M5SPEED yo bro please help, i got the csr back together but no cooant flush i cant drain it please help me find the drain location
last thing i need before finished with car
@@therealcyrus Huh?
How much oil drained out of the supercharger?
How much oil did you put in the supercharger?
How did you pull apart the Snout from the supercharger the glue they use is too strong I am trying to do it now impossible
Vice and rubber Mallet.
Where could one obtain the repair manual for a 2017 Jaguar xe?
I used all data.
Estimated dealer cost?
Takes me 2 days - 16 hours. I’m at $45 per hour.
Subscribed!! One of the best videos on youtube! From camera angle to explanation to every details... couldn;t be better.. Thank you so much... Also, would you happen to know what is causing this noise on my RRS V8 Supercharged th-cam.com/users/shortspFXDfNHlTG8
One of the pullys. Or tensioner.
@@E39M5SPEED Thanks again! much appreciated.