A nice tip I learned years ago when marking the face plate on lock and also the receiver, screw them on and use a Stanley knife to mark around the edges instead of the pencil. That way you get super accuracy and no need to chisel pencil lines, just clear out inside the Stanley lines. Same works great with hinges.. Nice work..
He didn't just butcher the door with the chisel because "you wont see it anyway" like most would, very careful and precise with the chisel, respect mate!
Brilliant video. Just bought a house that's a doer-upper. Everything is from the 70s - so having to replace doors and handles and such. Don't have the money for a pro, but I'm fairly handy with DIY. But had no idea how to put a door handle on! This video was a perfect demonstration! Thank you :)
Top tip - when you decide where you're going to put the fixings on the door - just check that where it's going to meet up with the catch plate on the frame there's not a bloody great knot!
I'm so glad you showed the door closing afterward, just for - pardon the pun - closure xD Only the living room door in my new flat closes, so I'm looking at tweaking every other existing latch :P
I still don’t understand why the make these latches so wide that makes is more difficult to chisel out around the plate, or they should make the thickness of doors to a standard that will make it easier
Annoying how those latches have go so many curved corners, you'd think they would design them with square corners to make it easier to chisel. Good job though :)
Jamie Roberts that actually makes them easier to install in mass quantities, as you can make a jig and just use a small router, similar to radius hinges
It's just so satisfying watching you chisel out the latch. Real skills there my friend 😊
whole 12 minutes i was hooked up without ever once thinking of leave the video. if only movies could hook you that much 😃
A nice tip I learned years ago when marking the face plate on lock and also the receiver, screw them on and use a Stanley knife to mark around the edges instead of the pencil. That way you get super accuracy and no need to chisel pencil lines, just clear out inside the Stanley lines. Same works great with hinges.. Nice work..
Nice prompt, thanks)
Also why not to cut latch and face plate while door isn't hanged yet?
Always do this very good
He didn't just butcher the door with the chisel because "you wont see it anyway" like most would, very careful and precise with the chisel, respect mate!
Brilliant video. Just bought a house that's a doer-upper. Everything is from the 70s - so having to replace doors and handles and such. Don't have the money for a pro, but I'm fairly handy with DIY. But had no idea how to put a door handle on! This video was a perfect demonstration! Thank you :)
Pretty much the same for me! I’m just doing things bit by bit one step at a time. We will get there
@@Alexander_l322how's it going now or have you finished
Same
Same....again! And mines from the 70s, too.
Nicely done. I appreciated your attention to detail with the chisel.
Thank you so much for the video. Very good demonstration, exactly what I needed!
Easiest tutorial I’ve found! Thanks man🫡
Always love watching a pro do their thing!
Top tip - when you decide where you're going to put the fixings on the door - just check that where it's going to meet up with the catch plate on the frame there's not a bloody great knot!
You're simply the best. I love all your videos.
Great job bro.. I'm confident watching this video that I can do the same ... never done it before, but I'm good with chissles ...
Very informative and helpful video 👍🏻🇵🇱
Brilliant, thank you. 👍
Hi. Great stuff. Nice job. 👍. Thank you for sharing. 👌
Very good .now let's see if I can do !!😁
Thanks you so much almighty Allah swt bless you brother!!!🤲🤲🤲
Brother, only Jesus saves. I pray that you may seek Him and find Him. GOD BLESS 🙌 🙏 ❤
Da vinci code
@@btbro5172😂 Jesus couldn’t save himself forget forget humanity ..
Thanks for this, is there a reason why the curved part of the latch 'tongue' has to go on the side that closes?
I'm so glad you showed the door closing afterward, just for - pardon the pun - closure xD Only the living room door in my new flat closes, so I'm looking at tweaking every other existing latch :P
Till this day we still look up things like this THANK YOU , Because I sure was just staring at this door knob 😂😂😂🤣🤣🤣
Your the man, keep up the good work, thanks
what about the spindle rod that goes in??
Thanku for this video
I'm on my doors this week
Nice.. Very comprehensive video. Thanks
Great demo 🙂
Many many thanks, very good instructions and nicely shown. 😎👍🏻👍🏻
Very good video.. explained well and as previous viewer said great clean work with the chisel
dude, awesome brilliant, simple, complete. thank you
Nice tips
Brilliant just got to do this for my brother tomorrow.
Brilliant video, thanks!
Great video my friend. 👍
Great. Wanted to see the chisel part
beautifully done how to video. thank you
What size drill bit did you use for the hole for the handle?
dani ribero 20mm
So helpful, thank you!
Thank you so helpful us all.
I still don’t understand why the make these latches so wide that makes is more difficult to chisel out around the plate, or they should make the thickness of doors to a standard that will make it easier
This is great video...thank you!
who knew sped up chiselling would be so satisfying to watch 😂
Just what I need not know for this weekends door fest 😅
Brilliant informative video Thankyou!
Nice music soundtrack 😀
Thanks for sharing your knowledge mate 👍👍👍
Thanks you made it easy for me
Good job 👍
Really nice video , thanks for taking the time to do these.
nice guy nice video
Such a good video thanks for the help!
Use a trim router for my recessing of latch plates etc and I fit my door stops last, but nice video
Really good
I like ur tools
А как на счет фрезера?
Good vid cheers mate
Annoying how those latches have go so many curved corners, you'd think they would design them with square corners to make it easier to chisel. Good job though :)
Jamie Roberts that actually makes them easier to install in mass quantities, as you can make a jig and just use a small router, similar to radius hinges
thank you it was very interesting
loved the video.
Very informative as always 👍
How do you keep your chisels so sharp?
It is a brand new chisel
@@how2d223 niemożliwe:)
Sharpen it when it gets blunt
Thank you
You didn't mention the "Block" and to make sure it's on the correct side. Otherwise the handle screws do not have anything to grip!
Gdzie masz kontownik.
Nooice!
Thank God for you showing how to do this. May I suggest safety goggles and gloves next time. Don't want you hurting yourself in any way.
Cindy Mc Pherson ahahahaha
This gentleman is not english and that why he is not obsessed about health and safety.
Bravo
👍👍👍
There are many similar projects in Woodglut's plans.
You need to do the work more professionally.
I'd love to see it done professionally by yourself.
....waiting.🙄
freak
Not that easy,the latch cover was thicker than the original so the handle didnt fit,so necessitated chiselling it larger.
thank you for making this video, extremely useful!