How to Install a Door Handle and Latch (QUICKLY AND EASILY!) 🚪
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- We're proud to be sponsored by James Hardie, the global leaders in manufacturing fibre cement products. Be sure to check out their exciting range of products here: bit.ly/3kpdtRd
Tools Used:
Trend LOCK/JIG For Routing Face-Plate Recess and Mortise-Doorlock Installation Tool, Black, 34-58mm Wide Doors - amzn.to/3BK5Cpt
Overseeing the installation of a door doesn't need to be the bane of your life! Check out this second video in our mini series covering new door installations. In part three, Pete runs you through the more intricate parts of a door installation... fitting the door latch and handle.
PLEASE NOTE: we’ll endeavor to answer questions and comments as soon as possible depending on our work schedules.
_________________________________
For all our socials! ▶linktr.ee/buil...
Music from Epidemic Sound and the TH-cam Audio Library
_________________________________
#Carpentry #DoorInstallation #HomeImprovement
How to Install a Door Latch and Handle (QUICKLY AND EASILY!) 🚪
door installation tips
how to fit door latch and handle
carpentry tips
install door latch and handle
door handle install
how to install door handle and latch
do it yourself
door handle fitting
door handle installation
diy
You guys at A&E have created a monster with Pete haven’t you?
He’s taking over the channel isn’t he?
Absolute top man, love watching his videos
Pete has helped me no end with my build. But when he had that dust mask on his head like a party hat had me in stitches! 😆😆
Used the trend jig probably when it first came out in 2000 but since then now use my sabuer mortise jig, any lock or latch and hardly any bits to loose, plus you can mill out the lock once you’ve hung the door in place, not rally a big fan of keep taking the door off the hinges once hung it
Nice one Pete👍👍🍺🍺
Thanks Mark! 👍
Loved the party hat Pete . Can we all wear them in Monday for our final day 😆🧱👍🏽
The man is a master
Everything is always so well explained in your videos, I’ve been looking at hinge and lock jigs, now you’ve made my mind up, new toys coming my way. 😜👍
Great job Pete 👍🏻!
And top tool tips 👍🏻👍🏻
Hi Pete.
Nice Pete.
Thanks Pete.
Get in Pete! I like watching you work, keep up the good videos! 💪🏻
Can't beat good old fashioned way though 💯
Inspiring video guys. Pete did such an amazing job on the door!
Top video and top job..👍🏻 Well done Pete..😀
Nice work Pete. The lock jigs help make a very neat finish especially on a veneered door.
If you have any movement between the metal plates and the main body of the Trend lock jig then a piece of insulating tape over the edge does the trick. 👊🏻.
Could do with tips for when the fitting doesn't go quite so well & you need to adjust things!
On that type of door i always think the lock and handles should go on the mid rail looks better than half way down but just my opinion
These are great videos, can’t wait for the next one… 👍👍👍
The way to never lose the screws,,,when taking the door of ,put the screws back in the screw holes on the door frame,,,simples,,,🏴🏴🏴
I’ve worked on many of these old fashioned handles and always marveled at the amount of work it would have taken to install one. Are these common where you are? Are you in England?
Thank you good sir
Great video, thanks !!!
Great video Pete really helpful what router I like the look of it
Excelente video 👍 👏 👌🏻 🙌
Thank you for watching Vianka! 👍
A tip from me: on doorknobs, sometimes the grubscrew can work loose over time. My fix is to file or cut an "x marks the spot" where the screw hits the thru-bolt - it allows the screw to bite better. Great work btw.
Hi Derek much appreciated great shout thanks for sharing your tips that’s what I love about TH-cam it’s really important that we share tips and knowledge all the best Tony 👍
@Build With A&E Thanks for the reply - would hire you guys in a heartbeat if you were in Dublin. 👍🏻
Be Warned! To use this jig you need to use a 1/2 inch deep depth router that plunges min 80mm with long bit, otherwise it's not going to go deep enough. Very few routers can do this. Really only suitable for use with the Trend router used in this video
Nice work - one question though. Where did the door handles come from? I like the pattern and they would fit well in our house. Thanks!
Interesting thank you "Carbon Footprint" on chisels that a new one never heard that before. And yes you may be correct about better quality steel on older chisels or higher carbon. Company i knew used to take down old steel frame factories for a price. The price would change depending on the carbon content better scrap value. Not sure why they do not use "Removable Pin Hinges" saves finished doors from getting damaged. while work is still going on each to their own of course. Must be hardest thing to do video yourself for all to have a go. "One Man's Meat Is Another Man's Poison" as they say..... Nice work well done
Seen so many bad reviews on that jig I gave up hope of having one.
great vid will this jig do the tubular latch as well or just mortise locks thanks
That is not an MDF core, it is Chinese farmyard sweepings.
nice joob
Is this an advertisement or showing how to? 🤷♂️