Ruckus at Home: Introduction
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- If you're watching this video I'd like to inform you that on Wednesday July 15th at 11AM MST we are performing a Live Stream right here on TH-cam to help give you more information on your RUCKUS at Home products. Swing by the live stream, say hi and ask questions. We will be there to help!
You can find the Live Stream right here:
• RUCKUS At Home - Live!
Provides an introduction to Ruckus devices that are commonly installed in a smart home, the ICX 7150 Switch and the R510 Access Point (AP). Learn to identify the ports, what the LEDs mean, and how to remove your AP from its wall mount.
For more information about how to use and troubleshoot Ruckus devices that are installed in a home, take a look at the Ruckus at Home page on the How-To Hub at:
support.ruckuswireless.com/ho...
The simplicity of your instruction makes an overwhelming task easy. Thank you.
Wait this isn't hots music
😂
Yeah was wondering wtf
Great video!! Thank you
Hello, thanks for the videos, help a lot, it would be also great to have videos related to the CLI in the Access Points.
For example, topics related to issues for:
1- SONOS Speakers not connecting
2- How to get access to the CLI
3- Issues with password and username
4- Heartbeat Loss in the APs
5- Phone Issues not connecting to the SSID
6- Chromebooks and other troubleshooting.
The reason to ask this is that I receive this kind of case or tickets and sometimes a video would be great to understand better how to help clients from all over the world, specially in the use of the CLI.
The sonos speakers try to find each other via multicast. The AP handles multicast low prioritized and that causes the sonos devices to time out. You can disable it on the APs CLI directly with the following commands:
set qos eth0 igmp disable
set qos eth0 classification disable
you can connect via ssh with putty for example. the login credentials are either the ones of the controller, the zone that specific ap is in or the credentials you gave it - all depending on the controller type. you have to repeat that commands after every firmware update.
How do I get internet to the Switch? Which port do I use?
So I tried resetting my AP, But after resetting it and placing connecting it to a switch with DHCP I cannot access the GUI of it .
Thank you Warcraft Music and Gaming, very cool ;)
Ikr, this is the best track out of the entire game
What is the price for R510 and 7150?
whats the second ethernet port for? You just talked about the POE one
Ruckus ICX Switch - STAT Led doesn't turn on (The one on the left next to STATUS button). Also the access points don't turn on. Please help. TIA.
What does a blinking green power button mean?
Hello, we have an aparthotel with four houses (mansions) connected to each other with extremely thick wals and windows in Brussels Belgium, which contains about 30 apartments. We already tried to have a stable wifi network with a variety of acces points like tplink and ubiquity amplify but its still not stable an it gets interrupted very frequently. We are now looking to change the hole system and replacing everything with a ruckus setup! Which model of Ruckus AP do you guys suggest? Keep in mind we don’t want to pay tons of money…
Is there any utp connection in every single room? You can use Ruckus H320 in each room because if you said extremely thick.
You can use AP in your corridors, but trust me the user experience is not so great
Denna Maulana thanks for info!
My builder put this ruckus mesh ap system in my new house and didnt tell me. Im guessing these are much better than my single nighthawk x8
That they are - we have a ton of resources here and on our How-To Hub if you're looking for more information. support.ruckuswireless.com/hth-ruckus-at-home
It's like going to Volkswagon to buy a Jetta and the give a Porsche 911. One's going to be just a little bit more powerful and faster than the other.
My builder put up two ruckus connectors but they don’t seem to be acting as extenders or anything and our Ethernet in our walls isn’t working. I’m thinking of hiring someone to provide an alternative option
Where does the internet service provider box connect to the Ruckus box and also what line is used to connect them
In the base switch configuration, you can connect the ISP device to any port on the switch. By default all ports are in the same VLAN, so they all "talk" to each other.
This isnt heros of the storm music....is it?
it really isnt
What POE cable standard is required for a WAP? What cat rating of the ethernet cable?
Standard Ethernet cable will work. Specifically, CAT5e, CAT6, CAT7. Just make sure to avoid CAT5 (without the e) as this cable is too old to support POE. It lacks pairs for it.
I have the r320, but the 5. and 2.4 ghz are not lid based on your video. When you say wireless, iPad, iPhone?
The video is based on an R320 and those are the LEDs as shown. You can confirm here: www.commscope.com/product-type/enterprise-networking/wireless-access-points/indoor/r320/
how do I make the r510 wireless? Right now, it depends on ethernet for connection. Is there a setting for that?
The ethernet connection is also the power, which I'm assuming you are referring to? If you want to have it wireless only with no wired connection, that would require a power adapter.
There are some distinct disadvantages to doing that - head over to the forums and let's discuss further.
forums.ruckuswireless.com/ - Just search for Ruckus at Home and post there.
where does the ethernet cable in my wall be coneected to the ruckus
I have no power to each ports what do I do
For the life of me I can't get these things to be stable. I have 2 AP's on the switch. both are up and running, my connection is 400 mb/s and I'm only getting 90 and online gaming shows I have packet loss up the wazoo. After much frustration I hooked up my old Apple router and it pipes down 400 mb/s no problem no matter how many clients I have on it. Any ideas? When I run a speed test I'm connected to the 5ghz channel as well so it should have no problem, I'll literally stand 3 feet away from the AP so distance isn't an issue either.
I would encourage you to contact Ruckus support for troubleshooting the issues you are describing here.
If my house already has two R510 APs can I add a R550 or R650 to get WiFi 6 in our main living area? Are there any downsides to doing this? I would prefer to not upgrade the AP in the upstairs loft if I don’t have to. Should I avoid having an R510 and R550 on the same level? Thanks!
Yes you can add a WiFi-6 capable device to take advantage of those features. Remember however, the devices in your home also need to be WiFi-6 capable. With regard to placement on the same level, power levels can be tuned (or even set to auto) and specific radio chains can be disabled (if necessary). You would want to make sure each device uses it's own channel and that there is proper coverage overlap so that devices can roam seamlessly.
Is the quality of their circuit board so bad they show an animation?
Where do I plug the internet into???
I'm looking to purchase a R510 for my home. Is it recommended to place this in the middle of the house or in the attic? I've read mixed things and wanted to hear your recommendation.
Hi Tom - In all honesty, it really depends on the size and layout of your home. I would recommend placing it in the middle of the house and see how it behaves.
To help further, we are doing a Live Stream here on TH-cam on Wednesday the 15th and 11AM MST - swing by and ask as many questions as you can think of, we'd be more than happy to help you out! Follow this link and you can set a reminder:
th-cam.com/video/dnFIWBeK9pc/w-d-xo.html
Where does the ISP routers RJ45 connect to on the ICX 7150 to provide the internet access?
This video is a bit bizarre as they aren't considered "common" in a smart home like the presenter states. In business deployments, a 3rd device would be the internet gateway. I've deployed a lot of ICX hardware and I'm not sure how to use the 7150 as an internet gateway, though we do plug ISP routers into them as they state but that is because it's VLAN'ed.
@@bbrendon I think it's a relatively new thing for use in "Smart Homes". I just bought a new Lennar home and this switch with 2 wireless hubs are included in the home.
You can connect your ISPs RJ45 LAN port to any of the 12 ports, which are numbered below the ports, in the center of the device.
Does any one know how to hook up a spectrum business equipment as fast the ethernet cords go? There is a modem, a router, a ruckus point of access and a arries.
@@RUCKUSEducation can the 7150 work as a router/firewall where the ISP router only serves as the internet gateway in bridge mode? I'm moving into a new Lennar home in couple weeks with about 18 ports. but this switch only has 12. I have devices behind the network that require port forwards and LACP support.trying to figure how I'll transition to this hardware from what I'm using in my current home.
Mine lost internet during a storm, I need to restart it without resetting it.
We have a ruckus 610 AP which I need to release from the walk screw. I can’t find the hole to unlock it. It’s not in the same location as the video. My AP is 3 years old.
R610?
Yes
Is a R720 overkill for homeuse?
Not at all - I have one at home and it works great!
How can get assistance with the equipment? Is there ruckus support?
No, their support is abysmal
I have a rukus ap and a net gear router. Can I hide the ssid on the net gear and set the rukus as the ap?
Yes, however I would suggest you disable WiFi on the Netgear all together.
@@RUCKUSEducation thanks! So I just connect the ruckus via Ethernet to the net gear, disable wifi on net gear, but what is the default IP for ruckus I’m assuming I’d need to reset it as it was used previously
@@RUCKUSEducation Thank you, I am not familiar so, I have a comcast modem I but I use Netgear for wifi. So to get the ruckus setup as an AP what exactly do I need to do so I cna use the ruckus as ap? Just connect via ethernet to the netgear, turn off wifi on the netgear then what?
How to set it up to work with no ethernet cable?.
If you only have one access point, then you will need an ethernet cable regardless.
where does the line from the cable provider modem go?
Use any of the 12 ports located in the center of the ICX-7150
In the video it says the APs should have some light on at all times, but all 3 in my house that have been working for years just went completely dark at the same time. Any one know a fix???
The POE has power and looks fine, I'm not sure what is going on
Bro can u respond I’m playing a video game on my ps4 and I keep lagging and I have the same router and I want to reset it but I’m scared it will reset everything and I can’t reboot it bc my router is plugged in the wall
Swing by the Twitch live stream on Thursdays at 1PM PST, 4PM EST and I'll give you a hand there.
twitch.tv/RUCKUSedu
@@RUCKUSEducation ok bro I will check it out
@@RUCKUSEducation are u goin live ?
Çok gösterişli bir cihaz değil, umarım kalitesi Aruba ve Unifi muadillerinden iyidir
Sometimes great things come in a not so flashy package!
how to factory reset ruckus r310 i forgot my password thanks
Yo bro when u reset ur router what happend did it reset everything?
Same method - just hold the reset button for 12-14 seconds.
@@RUCKUSEducation will it reset my whole wifi password and stuff?
@@weezole2602 For your information, yes bro. It reset every configuration your installed in AP.
do you need the ICX? Can you just use the AP?
You would need a networking switch of some kind to connect the AP to the Internet and the local network.
@@RUCKUSEducation. So just a regular dumb switch would work? Is the ICX a Layer 3 switch? I was going to buy just the Unleashed version of the R720 for my home, do I need extra access points too?
Not able to recover after 30 seconds of resetting? Really?
I bought a house with these but can’t figure it out for the life of me
If the videos aren't quite getting you the result you're after, come join us on the forums where we can help out further. forums.ruckuswireless.com
for true noob
Do not buy ruckus products customer service is horrible. I purchased a new builder home and builder stop using them so ruckus has decided to punish them by not giving support to the customer that purchased a home
Hmmm. Commonly found in smart homes? On what planet does this guy live?
I personally have seen a few new home builders installing ruckus as a standard feature.
@@TamVilla916 Yea, that would be a more realistic thing to say.
My New Lennar home came with it standard
@@victorr9065 Mine too
brandon splawn And mine! Which is why I believe we’re here lol at least, that’s why I’m here