Hello, I tried to reset the ruckus since the access points are not even showing the power light. After the reset the Port status mode selection button and LEDs lights keeps flashing amber, for over 4 hours by now. I connected Port C to my Mac and run the command to access the IP and keep getting "Request timeout for icmp_seq 1" ... any suggestions?
So, it means it’s radio is not broadcasting, maybe you need to do it manually! About connecting to it, if you cannot do it, check with Ruckus support to see if you can connect to via serial connection.
I cant do a CLI as mine is stuck in “building unleashed network” and it will be like that for hours. Whenever i try to ssh to the ap’s IP address it will say its unable to negotiate
I’d say try to use the reset button by inserting a toothpick or something like this, it should work, unless I’m not sure. Maybe you need to open ticket with ruckus or ask the question in a Ruckus public q&a forum.
If you're asking about what I've mentioned above, simply by clicking on it you can enable and disable it. But you should use your browser instead of ssh. If you are asking about DHCP and auto-provisioning, take a loot at this address : docs.ruckuswireless.com/fastiron/08.0.61/fastiron-08061-dhcpguide/GUID-72EB44F3-7508-47C6-B021-5D604D984BD1.html
@@maybonifacio7869 Also try "get ap-mode". Sorry for the late response. If your device is not either in standalone or controller mode (unleashed or leashed), you're likely not to get any response from this command.
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
Amin jan kheyli mamnoonam merci
Your welcome sir 🙏🏻🙏🏻🙏🏻
Hello, I tried to reset the ruckus since the access points are not even showing the power light. After the reset the Port status mode selection button and LEDs lights keeps flashing amber, for over 4 hours by now. I connected Port C to my Mac and run the command to access the IP and keep getting "Request timeout for icmp_seq 1" ... any suggestions?
So, it means it’s radio is not broadcasting, maybe you need to do it manually!
About connecting to it, if you cannot do it, check with Ruckus support to see if you can connect to via serial connection.
I cant do a CLI as mine is stuck in “building unleashed network” and it will be like that for hours. Whenever i try to ssh to the ap’s IP address it will say its unable to negotiate
I’d say try to use the reset button by inserting a toothpick or something like this, it should work, unless I’m not sure. Maybe you need to open ticket with ruckus or ask the question in a Ruckus public q&a forum.
how to remove the Enable Auto-Update? or set to factory default
"Enable Auto-Update" in the radio status tab? and what do you mean by how to remove it?
If you're asking about what I've mentioned above, simply by clicking on it you can enable and disable it. But you should use your browser instead of ssh. If you are asking about DHCP and auto-provisioning, take a loot at this address : docs.ruckuswireless.com/fastiron/08.0.61/fastiron-08061-dhcpguide/GUID-72EB44F3-7508-47C6-B021-5D604D984BD1.html
@@aminsedighfar or how to set to AP mode using cli
@@maybonifacio7869 Did you try "get sag mode" ?
@@maybonifacio7869 Also try "get ap-mode". Sorry for the late response. If your device is not either in standalone or controller mode (unleashed or leashed), you're likely not to get any response from this command.
Hello do you know how to delete or disable SNMPv2 community or disable whole SNMP via SSH ?
Sorry for the late response. Unfortunately, I don’t know this one. I recommend to ask it in Ruckus forum
Again sorry for the delayed answer.
What if the 2.4ghz says Radio off. How do you turn it back on
Sorry for the late response. Did you try “set state wlan1 up”
How would you do this via Windows 11
@@LouisBotha82 which part of that? I guess there shouldn’t be any differences !
hello,
how to setup vlan id to ssid?
@@langtupt hi
I have never tried this one, and unfortunately my AP is not with me to check. Sorry about that
@@aminsedighfar yes :( thank you Bro