204: Massey 2607H - Engine Oil Change
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- Using Agco's SAE15W-40 diesel engine oil and 1447082M2 oil filter, we are doing our first oil change in the Massey 2607H. This is not a "how to" video so much as it is a "how I did it."
- บันเทิง
![[TH] Esports World Cup : Point Rush Stage](http://i.ytimg.com/vi/eLU-jnYp3Zs/mqdefault.jpg)
I like your helpful tips. Such as when putting the oil drain plugs back in, the threaded end goes in first.
Well done Logan
It was controversial but I went ahead and said it to help those who didn't know better! HAHA! I can't always guarantee entertaining and educational content, but if I'm doing it outside, it will probably make it to TH-cam.
I have a 2606h I took a large funnel and a plastic hose and it made putting the oil in much easier no spills
Was it a flexible neck funnel?
I do like the design. You make a good point about the center of gravity! As soon as you pulled the plug, I was thinking, “Shoot that oils got another 200 hours to go!” Lol. Looked clean!
It was so clean we used it to deep fry a family size pack of French Fries! Haha yeah I was expecting darker oil but the hours it had were mostly very low RPM and easy use. I think my next scheduled oil change is further out... farther out... no. FURTHER.
@@FabbedFun 😂
That thing is built like a tank thanks for reminding me I need to change my oil in the Tractor. Its going to be a busy year😁👍
I look forward to some more fabrication projects from you soon! Thanks for watching!
Good evening mon ami 👌👍😉 I realy like the way heavy duty front cast iron 👍👌💪😉 Nice guitare playing 🎵👌😉 Yes, clean oil in deed 👌👍😉 OUTSTANDING maintenance video Sir 😉👍👌 Cheers 🍻
I thought it was pretty clean for 70+ hours in a diesel engine. Not bad at all. Thanks for watching!
I did my 50 hour oil change on my 2607H this past weekend. I agree about the oil fill cap angle. I told my dealer whoever designed that should be fired. ha! i had oil running out of my funnel and had to just go slow
Same here! It's such an obvious bad design. I'm guessing there was a loader re-design or body panel change that no longer required such a terrible angle on the oil fill... because there's no reason for it to be this bad!
Sure like the 2600 series! Reminds me of my great grandfathers tractor.
I like the retro look too! And it's actually very simple compared to many new tractors. Big plus for me!
@@FabbedFun electronics are great until they fail
Reminds me... I need to change the oil in the old JD e170 lawn tractor.
Don't be late on the RK either! How was the maple syrup production? Did you eat it all yet?
@@FabbedFun have not eaten it all yet. Lower yield than last year… however better syrup. With two years under my belt, not pretending to understand the science just yet. I ended up with about 20 oz this year from my 3 trees.
@@TryNewThings It can vary a lot based on weather patterns. I'm not an expert either!
I like the design of the front axle. It seems odd that it has that ridge in the sump which requires a drain plug each side. You would not believe how many different types of oil filter tools we have, the best are the ones that fit on the end like a very large socket. Great job on the oil change
I believe the shape of the oil pan is due to the engine being designed for multiple tractors or types of equipment. I have four or five sockets like that, but the smallest was too small and the next size up was too big. Thanks for watching and commenting!
I never fail to take the oil shower lol! I take the loader off for oil changes, makes filling up much easier.
I told myself I'd never remove the loader. I don't know why. It looks easy enough to do... but the real problem for the oil changes is the angle of the fill neck.
@@FabbedFun I doubt it’s much different than removing the kubota loader, I can do it in about one minute, easier on and off than a 3pt attachment !
You’re all set and ready to roll 👍🏻🙋🏼♂️🙂
I thought about sending some of my used oil to Ben Kennedy so that Massey power might enhance his M6060 lol! Shhhh don't tell him I said that!
@@FabbedFun 😂😂
Good job 👍
Thanks 👍
How's she goin'? Wow you hardly spilled any oil at all. I'm totally impressed!! I was very surprised at how clean the oil looked. Usually diesel oil gets pretty black pretty quick. Nice job changing the oil and and filter. Take care!!!
It's a Massey Ferguson! It is perfect! Right? Haha I hope it stays clean and lasts forever! Thanks for watching and commenting!
The only things I don’t like with Massey and John Deere front axles is having a universal joint at the knuckles and the lack of a tight turning radius. I haven’t found many tractors that has an easily accessible oil fill port, that seems like such a simple thing to design yet engineers make it so difficult on the owner. I have no idea why but I love watching oil change and maintenance videos! Good job!
The M6060 I test drove at a local Kubota dealer had a much tighter turning radius, but the arguable trade is overall strength. (Though the loader cylinders likely won't lift enough to damage either front axle)
Btw, I watched your bus advice video twice today at lunch. SPOT ON!! I did a lot of reading and digging when I was really into doing a skoolie and it took weeks and weeks to get what you spelled out in a few minutes. Great job!
No EB gloves huh? 🤔
Dumpsters are not always a buffet of choices haha. I take what people give or throw away!
Have you got a video on how to service Hydraulic/Transmission fluid on 2607 ? Thanks for any help!!!
Not yet, my hours are pretty low. Massey has some service videos on TH-cam, but I haven't looked through them all.
Do you have a video changing the fuel pump not the high pressure pump but the lift pump
I don't think I've done that one yet. I need to document hours and look at the maintenance schedule again. Do you have a tractor like this one? Any issues?
I recently changed the oil in my 2606H, and I agree the oil filler on the side of the engine is a poor design. There is another oil fill on top of the engine near the back of the hood. It is not very easy to get to with a loader on the tractor, but once you get back there, the oil pours in much more quickly. Massey also recommends changing the hydraulic oil and filters after the first 50 hours, but the filters for mine are on back order (coming from India). Should be here by May.
I waited three months for mine, so I bought two of the three my local dealer brought in for stock. I'm probably just going to skip the first change. The mechanic said they never have problems with a gear tractor's hydro fluid in just 50 hours but he did recommend changing the oil in the planetaries and front axle differential. He said they run a test on the engine and tranny, then change the fluids. This washes all the manufacturing dust and grit out. The front axle and planetaries, however, are not tested on the assembly line. They just install them and add oil, so he recommended changing all that oil soon to reduce wear from machining dust and burrs (suspended in the thicker oil) that have worn loose in the first few hours of operation. I see the logic in it. I just need to do it.
@@FabbedFun I have been waiting on the two hydraulic filters since April 2022. They are still on backorder. This is a great tractor, if, and only if, you don't need repair parts quickly. The supply chain for MF is a mess right now.
@@brownnshiney What I have noticed is that some dealers will work to have parts transferred from other dealershipswhen you need them... while others only wait patiently for the manufacturer to fulfill backorders. You might ask yours if they can do a remote stock check and call around if you start hurting for a part. Also, asking for a cross to another brand might be feasible?
@@FabbedFun I will give that a try. Thanks for the tip!
Which one of the notches on the dipstick is the full mark?
I aim for the top one! Thanks for watching!
How many gallons of oil did it take?
I have this tractor. I did the oil change last month. That fill port is at a terrible angle. Try holding the 10 qt container of oil and the funnel and not spill any on the ground! An engineering failure for sure. I think we need to develop an adapter to change the angle. lol
I forgot about this... yeah, probably my biggest complaint about the tractor so far. I am assuming it was designed for multiple situations, some of which had different clearance issues. On this model, the fill neck does NOT need to be like that. Thanks for watching and commenting!
How many quarts of oil does it take. Average ? Anybody out there, tnxs!!
The owner's manual says 9 liters of engine oil. That's roughtly 9.5 quarts. Good question! Thanks for watching and asking!
Do you know how much oil and hydraulic oil this tractor takes when changing?
Thanks for watching and the comment. I tried to look up fluid/oil capacities but don't see it online. I'll have to find my manual and look it up. You have a 2607H?
Never pre fill your filter
Because?
Owner’s manual tells you to fill it 3/4 just like he did.