FRONT SWAY BAR LINK REPLACEMENT (JEEP ZJ) th-cam.com/video/FlbczFQBXVU/w-d-xo.html I ordered these off Ebay here.. www.ebay.com/itm/For-1993-1998-Jeep-Grand-Cherokee-Sway-Bar-Link-Rear-AC-Delco-44178MD-1996-1995-/392391725542
Great vid. explains the installation of the components, like which way the bushings & washers face. On my 97 my pass. side broke just like that about 3 months ago, ordered the kit with poly bushings ? Never used poly before so ? They still set here on my comp. desk next to the flow master cat. that I also bought months ago, LOL. I have to get my butt in gear and install this stuff, another GREAT VID. Sir.
Hi Thank you for your great videos. They are very useful tom . I was wonder if you have any video of replacing the rear coil springs on 1998 Jeep Grand Cherokee Lorado. Thanks
Seems like you’ve replaced the entire suspension and steering linkage on that cherokee over time. I have a 95 xj 2d 4x4 that I doing the exact same thing to. Your videos havre really helped me. Thanks for taking the time, money and energy to do this for us lesser folk. How was the front steering and ball joint kit from Detroit Axle? Has it held up well? Im considering the same thing and wanted an idea of durability for someone that sees how it breaks in.. But I’ll still need to replace the track bar and the control arms and the swaybar bushings too. Not to mention the axle u-joints and probably the hub too, since I’m sure that I’ll need wheel barings too. Loads fo fun and much less stressful thanks to your vids... Much appreciated...
That steering linkage kit has held up nice and has given me no problems on 3.5 inch lift with 31x10.50 Mudders. I dont wheel I just have a mobile mechanic set up so I cant speak of how it would do off road
Always appreciate your pro grade, to the point, detailed, part specific diy videos. Question, B.G., what headlight bulb have you had the best and longest lasting life and lighting experience with? My application would be on a 95 JGC Laredo, 4.0, 242, 231, dana 30f and 35r, 4wd. Needing light advice on all bulbs exterior, led, zenon, halogen. Any help or advice for myself, or others? Thanks in advance.
this makes it look so easy I want to go buy the parts and do it just because. I love how concise your videos are. oh and by the way I used some Lucas Oil in my 94 this morning and it raised the oil pressure and quoted it down some. cheers!
You gave torque specs but, in the video, just grind away with the impact. Did you actually get them torqued right or just eyeball it? I’m just wondering at what point you torque them down right with a torque wrench.
I have an impact I just don’t trust my own eyeballing. How squished would I want them? I feel like as long as they are good and tight they’ll be fine. Cannot find my torque wrench
@@bryanmenard9385 27 ft lbs is not alot. Youll get a better feel for it if you use your ratchet but making sure they are tight is good enough. Youll be fine
my size8 wrench snaped when tried to hold the midsection, the vice grip seems not to hold it firm enough and it keeps spinning...I guess I will have to cut it off.
I have a 97’ Jeep Grand Cherokee Laredo Orvis edition,it’s not wanting to shift,it’s an automatic,Iha e gone too low and shifted too 2nd then to drive and it seems to work for now . I have had to pull over from time to time just to do this shift routine to get it to shift . Help please ???
+Astral Auto Repairs I have to have a thousand subscribers before i can monetize videos? TH-cam change up so much i just keep making videos without thinkin about it.
Alright YA FREGGIN MOTIVATED ME TO GET MY ASS OUT THERE & DO THIS, I have to find my floor jack & jack stands first ? It might be awhile ? Their in the other side of a double garage that's about 3 foot high with ALL KINDS OF SHIT ? I'll post back if I DON'T DIE LOOKING FOR MY JACK & STANDS ?
Alright B.G. It's DONE, one side was broke off like yours then the other broke when I tried to unscrew the nut, ALSO LIKE YOURS ? I noticed that the side that was broke, the shock outer tube was rubbing on the inner one, I THANK YOU FOR THE MOTIVATION & GRTEAT DIRECTIONS BRO. One more question, what brand tires is on the other JEEP ? They look DOPE. The black jeep, I think it's black ? Thanks again. Now I have to get my FLOWMASTERS STUFF ON, IT NEVER ENDS MAN. IT'S A JEEP THING !
nowr2run That did not take you long at all. Heres a link to the wheels I have on my black Jeep www.ebay.com/itm/JEEP-TJ-YJ-XJ-31X10-50R15-FEDERAL-15X8-GLOSS-BLACK-WHEELS-TIRE-WHEEL-PACK-/232611041461
Imma go tell my ZJ “We have no problems, only solutions.” I love it.
The subtitles say applause when you’re done but it’s just the sound of the jack rolling out. Don’t know why but it made me crack up laughing 😂
FRONT SWAY BAR LINK REPLACEMENT (JEEP ZJ)
th-cam.com/video/FlbczFQBXVU/w-d-xo.html
I ordered these off Ebay here..
www.ebay.com/itm/For-1993-1998-Jeep-Grand-Cherokee-Sway-Bar-Link-Rear-AC-Delco-44178MD-1996-1995-/392391725542
Thank you for your video... Simple, short and sweet. Every bit of info you need to do the job.
I purchased them from rockauto.com. Perfect fit.
Thank you once again. This video saved me a lot of time. Replaced these last week and I appreciate all the info of sizes and torc numbers.
Good video. I like how you leave out the parts we don't need too see. But don't trim it down too much.
I enjoy your videos, thanks.
Awesome. You make it look EZ. Thank you so much.
Great vid. explains the installation of the components, like which way the bushings & washers face. On my 97 my pass. side broke just like that about 3 months ago, ordered the kit with poly bushings ? Never used poly before so ? They still set here on my comp. desk next to the flow master cat. that I also bought months ago, LOL. I have to get my butt in gear and install this stuff, another GREAT VID. Sir.
Thank you for the info I will replace on my 95 Grand Cherokee! Great Job!
Another quality video thanks
Hi
Thank you for your great videos. They are very useful tom . I was wonder if you have any video of replacing the rear coil springs on 1998 Jeep Grand Cherokee Lorado.
Thanks
Gracias por tus conocimientos amigo muy buenos vídeos maestro
Seems like you’ve replaced the entire suspension and steering linkage on that cherokee over time. I have a 95 xj 2d 4x4 that I doing the exact same thing to. Your videos havre really helped me. Thanks for taking the time, money and energy to do this for us lesser folk. How was the front steering and ball joint kit from Detroit Axle? Has it held up well? Im considering the same thing and wanted an idea of durability for someone that sees how it breaks in.. But I’ll still need to replace the track bar and the control arms and the swaybar bushings too. Not to mention the axle u-joints and probably the hub too, since I’m sure that I’ll need wheel barings too. Loads fo fun and much less stressful thanks to your vids... Much appreciated...
That steering linkage kit has held up nice and has given me no problems on 3.5 inch lift with 31x10.50 Mudders. I dont wheel I just have a mobile mechanic set up so I cant speak of how it would do off road
Always appreciate your pro grade, to the point, detailed, part specific diy videos. Question, B.G., what headlight bulb have you had the best and longest lasting life and lighting experience with? My application would be on a 95 JGC Laredo, 4.0, 242, 231, dana 30f and 35r, 4wd. Needing light advice on all bulbs exterior, led, zenon, halogen. Any help or advice for myself, or others? Thanks in advance.
this makes it look so easy I want to go buy the parts and do it just because. I love how concise your videos are. oh and by the way I used some Lucas Oil in my 94 this morning and it raised the oil pressure and quoted it down some. cheers!
zeitGGeist great. I only paid $14 shipped for both rear links off rock auto.
@@barricadegarage5361 what brand?
Chitown express AC Delco
Thanks. I do have a mysterious clunking sound from the rear end and I will check that out.
You gave torque specs but, in the video, just grind away with the impact. Did you actually get them torqued right or just eyeball it? I’m just wondering at what point you torque them down right with a torque wrench.
Me using a torque wrench is actually not important, I provide torque values For those that feel they need them because im a considerate individual
BARRICADE GARAGE So you eyeball it?
@@bryanmenard9385 of course
I have an impact I just don’t trust my own eyeballing. How squished would I want them? I feel like as long as they are good and tight they’ll be fine. Cannot find my torque wrench
@@bryanmenard9385 27 ft lbs is not alot. Youll get a better feel for it if you use your ratchet but making sure they are tight is good enough. Youll be fine
Looks like your using a 3/8" Stubby??
my size8 wrench snaped when tried to hold the midsection, the vice grip seems not to hold it firm enough and it keeps spinning...I guess I will have to cut it off.
Where can i buy the kit?
I have a 97’ Jeep Grand Cherokee Laredo Orvis edition,it’s not wanting to shift,it’s an automatic,Iha e gone too low and shifted too 2nd then to drive and it seems to work for now . I have had to pull over from time to time just to do this shift routine to get it to shift . Help please ???
th-cam.com/video/4h8wLL1-91I/w-d-xo.html
Saludos de Tijuana
Where did you get your parts? Part numbers?
I ordered these off Ebay here..
www.ebay.com/itm/For-1993-1998-Jeep-Grand-Cherokee-Sway-Bar-Link-Rear-AC-Delco-44178MD-1996-1995-/392391725542
Link to the bushings please kind sir?
www.ebay.com/itm/For-1993-1998-Jeep-Grand-Cherokee-Sway-Bar-Link-Rear-AC-Delco-44178MD-1996-1995-/392391725542
ANOTHER great video!!! 450 more subs to go, and that's when you can start monetizing and making some extra money!!
+Astral Auto Repairs I have to have a thousand subscribers before i can monetize videos? TH-cam change up so much i just keep making videos without thinkin about it.
Astral Auto Repairs its some crazy people this side of youtube im starting understand more of what you be going through on here. smh
LOL, 1000 subscribers AND 4000 watched hours within 12 months, but I've been keeping track of your numbers, and you will have no problem with that!
LOLOLOL, email me...Tim@AstralAutoRepairs.com
Mine is broken on the passenger side too.
So he just tightens them to German torque scale…. Goodntight
Alright YA FREGGIN MOTIVATED ME TO GET MY ASS OUT THERE & DO THIS, I have to find my floor jack & jack stands first ? It might be awhile ? Their in the other side of a double garage that's about 3 foot high with ALL KINDS OF SHIT ? I'll post back if I DON'T DIE LOOKING FOR MY JACK & STANDS ?
LOL.. aint nothing to it but to do it. attack the problem and get the job done!
Alright B.G. It's DONE, one side was broke off like yours then the other broke when I tried to unscrew the nut, ALSO LIKE YOURS ? I noticed that the side that was broke, the shock outer tube was rubbing on the inner one, I THANK YOU FOR THE MOTIVATION & GRTEAT DIRECTIONS BRO. One more question, what brand tires is on the other JEEP ? They look DOPE. The black jeep, I think it's black ? Thanks again. Now I have to get my FLOWMASTERS STUFF ON, IT NEVER ENDS MAN. IT'S A JEEP THING !
nowr2run That did not take you long at all. Heres a link to the wheels I have on my black Jeep
www.ebay.com/itm/JEEP-TJ-YJ-XJ-31X10-50R15-FEDERAL-15X8-GLOSS-BLACK-WHEELS-TIRE-WHEEL-PACK-/232611041461
Dont sell your zjs dude!! You will piss off God.