$200 Super Charger Makes Boost! Full Build in One Video!
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2022
- 🎣Take part in the 4th, July event in Fishing clash by downloading it via my link fishingclash.link/GrindHardPl... for free on your iOS/Android device! Use my promo code GHPC to get an awesome starter pack for a total value of $20! (available for new players only) 🐬
We went to Donut Media to put a $200 Supercharger from wish on a Volkswagen Cabrio. the supercharger is a slightly larger size than the one we put on our Barbie Jeep. This week Ethan fabricated a belt tensioner, supercharger mount and more! Check out the @Donut Media video here • We Installed a Wish.co... time for this old car to get a little boost!
Supercharged Barbie Jeep Series • Supercharger Install o...
Second Channel @Sent and Bent
Fan contact info
PO Box 2370
Sandpoint, ID 83864
USA
grindhardyewww[AT]gmail.com
For business or merch inquiries please contact products@grindhardplumbingco.com
Other inquiries grindhardplumbingco[AT]gmail.com - ยานยนต์และพาหนะ
🎣Take part in the 4th, July event in Fishing clash by downloading it via my link fishingclash.link/GrindHardPlumbingCo for free on your iOS/Android device! Use my promo code GHPC to get an awesome starter pack for a total value of $20! (available for new players only) 🐬
Hey great vid. One thing you guys overlooked during this build is the maf sensor was used in blow trough setup.
These sensors and computers dont like it. Looks like me5. 9 ive boosted alot of these mk3 golfs
Even the obd1 versions and tuned them and while logging can see it flats out. Maybe a swap to before the inlet and redyno? Would make a good follow up to a variable.
The Cabrio is officially the best car we own 😂 thanks for the hard work guys, it was great having some actual pros around the shop!
next you should v8 swap it
@@slow2.0t and rear drive
PRO MAD SCIENTIST...ROKKK ON DAILY
Too bad they ran out of time, hopefully they can be back again soon.
Stop doing deal dash sponsors there scammers
Is this the first big collab these guys have done? Definitely cool as hell! Love the 🍩 guys!
thanks man!
@@GrindHardPlumbingCo%THank YOU
you have been kicking ass for years now (Road Kill 2.0 )
pretty sure their first big collab was with rich rebuilds and the tesla
That's a negative. Please refer to Tesla project
Donut has also done collabs with other channels as well, always great content!
Happy 4th of July everyone! Have fun today!
Love the collabs, keep em coming
This is the greatest way to enjoy my 4th's morning. Nice hot coffee and a grind hard video. I was going to go out riding but everyone bailed an hour ago.
sorry about that man! Glad we could provide some entertainment!
You in Virginia? I’ll come ride with ya 😂
The amount of fabrication and tinkering as well as "shop work" is what I'm hoping for in most Donut Media videos. Definitely what I like to see and watch.
Move the mass air flow sensor from the pressure side to the intake side 👍
It does sound like something is backwards. haha
id move the throttle to the other side too
@@slowcars8622 Yeah, that compressor really doesn't care for the near literal dead-head its getting when the throttle is shut. That said, I get this was one of those "quick" jobs for shits and grins.
It makes it overheat and really noisy all the time instead of the quiet at idle and nice loud wine at wide open but you are correct for quick and dirty it works
Yup saved me having to type that.
For the noisy air compressor in your next shop, make a utility room to house it. Also, put the room up high, so it doesn't take up floor space. Thirdly, I made an intake to replace four expensive air filters on our compressors with one huge automotive filter & plumbed it to outside. The inlet being outside made a huge difference in noise reduction.
Once again Ethan's fabrication skills are outstanding. Great work.
The supercharger needs an idle bypass valve. It will reduce off boost temps and make idle easier to tune.
Id love see follow up or a working build
It also needs an intercooler
Learned the hard way the emissivity of aluminum makes laser thermometers not work on them without a specific setup.
Melted down a 2 stroke kit trying to save a couple bucks on a cylinder head temp gauge
Thought it was a donut media video by the thumbnail 😂 perfect colab
it was a blast!
lmfao same
I’ve been watching y’all’s come up from the beginning and y’all never disappoint. A collab with donut and supercharge a cabby… really caught me off guard lol. Got me wanting to finish the tdi swap in my cabby a little extra today
I was drooling like a mofo over a caddy the other day, something we don't see too many of where I live
2 badass channels coming together on the 4th? Heck yeah!
yewwww
Awesome colab. That thing turns 35hp into sick sound. Keep up the good work dude..
A Collab where the Guys make all the work, and Donut is Smiling and don´t even working on it, is not a Collab it´s a Job...
My two favourite channels finally doing a colab!! Awesome!!!
So cool!
Need to move the throttle-body and maf to intake side, as others said.
Looks like it needs to be overdriven more, if possible.
Still, entertaining and an amazing collaboration!
The collaboration is so cool, I've been following both your pages for years 💯
If ever there was a setup that ABSOLUTELY NEEDS a intercooler it's this one. You need to overdrive this like a mofo for this engine. That means heat! I'll bet the intake temps are crazy! these also typically use a bypass valve because they like to feed oil into the intake if they are under any vacuum.
I didn't realize what I was clicking on, thought it was a typical donut video, then I see my other favorite TH-camrs, not what I expected, but exactly what I didn't know I wanted......
I never knew I wanted an electric weed eater until I used one, same with electric impacts, guess I need to try an electric die grinder too
Grind Hard Plumbing Co AND Donut Media ?!?!
Congrats !!!
The collab we all needed
That was fun to watch! Donut and GHPC both seem to have similar mindsets. It's a good fit, guys! Nice collab!
The Donut media video made it seem like it didn't work at all but it made 5lbs of boost. That's something. It would be interesting to see if they could get the whole setup to function correctly. On any car for that matter.
The collab we’ve all been waiting for!
Love seeing some Idaho representin' on Donut's channel! Fantastic stuff.
You should build a mini boat trailer for the mini boat
Best crossover ever
This is the best collab i could imagine. Really entertaining.
And you did a good joob on the Golf
You need to have the throttle body/idle control system before the AMR500 as it is a positive displacement pump.
When you are constantly pushing pressurized air at the idle control valve it is not able to limit the amount of air entering the combustion chamber and thereby not able to idle.
You could also use dual throttle bodies if you want to keep the original in place, then you have one before the AMR500 that limits air at idle. Now your system will be under high vacuum at idle, so your hoses needs to be able withstand this vacuum without collapsing.
Lol never heard a supercharger that loud at idle....or with that strangely "grind-y" sound. 😆
Probably the pulley is too small, and it's really zinging that super charger.
All I have is.....outstanding!!!
Ratherbwelding, grindhard plumbing co and donut media... The best ohh and add whistlin diesel,, completes my day🎊🎉🎊🎊
Phumphrey recommended I come here and what's messed up is I'm already subbed and no notification 🔔 so now here I go fixing that screw up...Thanks Jimmy!!
A 1999 vw cabrio was my first car. Love this thing!
I did a budget build on a G16b suzuki with an AMR500 blower, custom pulleys and intercooled at 9 PSI (ridiculously LOUD) . To get it to idle I used a plumb back blow off valve around the Blower as a bypass valve. Without a bypass and with the throttle plate closed, the blower will be making huge "boost" pressure in the intake pipe (between blower and Butterfly) and will stall the engine at idle due to the load it puts on it. The belt smoke will be the blower stopping due to higher pressure at high revs when the throttle snaps shut
Grind hard flexin’ their skillz on donut 😂
Once again, ingenuity and creativity - brilliant!
Awesome vid with my two fav channels! The technique for cardboard cutout gaskets is easy and satisfying to do from what ive seen 😁
Bolt cardboard to surface requiring gasket, ball peen hammer and tap tap away
As I watch this, I am also currently wearing my CAD shirt!! So comfortable!
Thumbs up for the donut collab
Fireman 🔥🔥🔥
Boys loved this colab
Congratulations on an awesome collab!
yewwww
First Hoonigan and now Donut!? I couldn't be happier about this!
I think this is exactly what my bi-turbo E63-S AMG has been missing. 👍 This can take me from 600 hp to 300 hp.
MO POWA BABY!!!
Thanks for coming to Cali,
Awesome collab
Fyi, Pink BOE lube is the hot ticket for rotary files on aluminum. Keeps them from skidding or loading up better than anything else.
Yeeees I've wanted a Collab since ages agoooo!!!! So exciteeeed
it was super fun!
This is awesome, great job guys
i'm so used to see you guys work in much more tight space. this collab just you guys doing what you have been doing this entire time but with more space. which is nice
So happy y'all did some work with them
This is my favorite TH-cam channel by far!
heck yeah!
That thing is LOUD!
that's how we do it!
You need a bov between supercharger and throttle for a blow though setup. You are trying to make infinite boost at idle which is putting the supercharger into terrible efficiency range and is why is getting so hot
It's got too small of a pulley on it. and it's really zinging that super charger.
2 of my favorite channels in love it!
you need to install a bypass or blowoff valve for idle
Insanely cool they need to visit you guys next time! Both channels are sick af.
It’s really cool seeing all these other channels like Donut Media that have millions of subscribers reaching out to do collab’s with Grind Hard Plumbing to help get their name out there even more and giving them the recognition they deserve.
I have the Ameriabrade grinder. Worth every penny!
Absolutely
My guy forgot to put oil in the supercharger. He wrecked it. This is a very common supercharger for old BMW 4 cylinder builds. It does not sound like this, even when it's spinning at 16k rpm.
I’ve been waiting for this collab for a long time!!!!!
Verstappens RB18 sounds lovely
Oh the Ad read 🤣. Great Collab. Seeing them over at Hoonigan and now here 😘
WOW!!!! THAT'S WHAT EVERYONE WAS WAITING FOR!!!!
This was my comment on the original Donut video! GHPC was the perfect choice for this project. Hell yeah!
Put an A/C pulley on it with a clutch so you can turn your boost on and off like mad max!
Would also need by pass valve so super charger wont block the air flow and i'm not sure how the ECU react to lack of boost. Would probably need bit more advanced ECU that can swap the maps with push of a button that is tied to pulley, but that could turn dangerous since have bad connection and turn the supercharger on, but ECU uses naturally aspirated map, witch would put it pretty lean condition. Also how much torque those A/C pulleys can take before starting to slip.. Might be issue. Been trying to build gasoline engine aircompressor and pulley slipping might become issue, havent got it far enough to test this though.
@@Hellsong89 I think the fuel map would be like running a 100 shot of nitrous or so. When you use a nitrous system you need to pull some timing away from your motor or it'll blow up also...and a bypass valve up front would be simple
@@Hellsong89 aircon pulley supercharger were used regularly on holden/gm v6’s I believe.
I noticed Ethan was picking aluminum out of the burr bit flutes while grinding a square in the supercharger inlet pipe. I am a machinist and have found if you add coolant or a bit of tap/cutting oil to the cutter it won’t bung up with aluminum in the flutes. Try it out maybe it will help in the future.
Thanks for the tip man! Will try that for sure!
GHP once aging clutch timing w a video. Love u guys keep it up !!! 👍
I've been through pretty much the same project with a vr6 and a vf9 supercharger. You guys realize that MAF is not a blow through one right? Put it in front of the supercharger and at least 3 inches of pipe between that and the podfilter and the ecu won't be as confused anymore. Also the idle is shit because there's no bypass valve, it's getting way more air now than it can adjust/learn for. Unless the ecu was specifically tuned for no bypass valve, then forget what I said ;)
That thing sounds like a hoot though!
It has too small of a pulley on it. and it's really zinging that super charger.
@@musicauthority3516 Yeah Ive sen some videos of this thing being run at 20k+ rpm and it sounds similar
Great team up with Donut!
Unexpected Collab wicked sick!
You guys should do a life sized Barbie jeep
ayye lovely collaboration with Donut media! all you guys are badasses!
This type of Supercharger is best suited for engines that are 1,000cc or 1 liter or less they were often used on K-Car class of vehicles to boost horsepower and torque if they didn't want to use a turbo charger setup because K Class Cars usually if not all of them used engines that were under or right at a 1,000cc or less.
My dad has done things with a grinder welder and hammer that I never would have thought could be done. Add a square and a level and that's what he used to cobble together the driveshaft for his truck when we swapped the engine in it. Two years of burnouts later and it's still strong.
My dad used those same tools to build a forty foot steel steamboat in our yard when I was a kid. Took him seven years.
Yay for 2 GHPC videos a week!
I work at a fab shop but at home my tools are limited pretty much a old vice, old drill, grinder, welder and hammer and with some creativity and patience you can build about anyty but when I get time to build something small at work with fab tools like big band saw, plasma, shear, hole punch ect I can literally bang something out in minutes that would take several hours at home. I just built a Y pipe for a muffler delete for my boys Tahoe out in the driveway with some straight tube and a 45 with my welder, grinder with cutoff wheel and rock and a small maul and it came out pretty sweet. He watched and when he see how it came out with what I had he was pretty impressed saying wow that's why you get paid what you do...
this chanel never get bored ❤
Love this donut x grindhard 🔥🔥🔥🔥
Glad you'll have a big boost after this
we had a blast filming with these guys!
Dude this is dope
Omg fricking awesome Collab 😁😁😁
yewwwww
Always good when a big fish mega yeet channel bigs up the smaller ones,
Grind Hard helping out these lesser channels with Ethans superior fabrication skills
Tried to watch this about 20 hours ago , but I had to choose between not watching it at all or watching it in 360p . That's what $80 a month get you an internet service here in Canada .
Nolan’s a metal head let’s goo
NGL, been a regular view of BOTH of these channels for a very long time. Could be the best day of my life
I knew a colab was coming, I should called it!!!!!
I never knew you guys were this big, been watch off and on forever, love the 6×6 ranger
I love your guys work! Been on your channel for a while now. But maybe If possible put a 500series on that small boat for some fun!!
Hell yeah brother. Big moves at Grind hard.
LMAO! Someone stuck a screwdriver in it. That supercharger sounds like the little street bike that couldn't! That is hilarious.
I was so excited when I saw donut media, best collab ever
I actually found grind hard plumbing co from dounts video about good car youtubers and have loved every moment captured on your guys channel since!
So love the fact that TWO of my Favorite Channels are WORKING TOGETHER with a similar Goal!
But GHPC is doing all the Work and Fabrication...
Next stop "ROB DAHM"?
Happy 4th!!
It kinda sounds like a nitro rc car snd a combination of air raid when revving...👌👌👌😂😂😂
I met you guys when you first built the Barbie jeep at a tinny gas station in the middle of Tillamook Oregon next to the sand dunes when I was 16 So amazing to see how far you have came