Honda ATC 70 Restoration | Restored 140cc 3 Wheeler!
ฝัง
- เผยแพร่เมื่อ 28 ก.พ. 2021
- We restore my 1985 Honda ATC 70! I purchased this mini Moto 3 wheeler in the summer of 2020- it had been sitting for some time, the plastics were all cracked up, the original 72cc engine barely ran, and rust was popping out of the frame. We swapped a Piranha 140cc 4 speed semi automatic engine on it, completely transforming the performance of this all terrain cycle. In today's episode, we paint the frame, touch up and clear coat the original red, paint the wheels, install new wheel bearings, seals, brake shoes, and more!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Go Power Pit: bit.ly/3dX4q8m
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video. - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.79[2/2] มานั่งฮ้านกินข้าวนำกันเด้ออ้ายยย](http://i.ytimg.com/vi/pHIS_Sdy8P8/mqdefault.jpg)
What'd you guys think of the "survival hunting" adventure at the end?
That would be so good.
Its gonna be great when we get to it!
Where can i get murch??
@@philipbourguignon3288 in the description
Haven't gotten to it yet. We will tell you
They came with those safety stickers back then. I can remember peeling the stickers off my 82 back in the day.
Also heat the vinyl with a hair dryer to help pull wrinkles out. Do not apply the heat directly, swing it back and forth to gradually heat the area.
I collect atc's. They all had them.
@@JETHO321 yeah I have 3 old hondas but wouldn't call myself a collector. I actually remember when 4 wheelers came out, my son rides the suzuki 125 my grandpa bought new in 1985.
My 82 is a four speed, down shift pattern and swapped out the points for a CDI kit, still on original motor and my son andIi beat the heck out of it. Bought it for $300 back in 2012, the best purchase ever! The survival ending was pretty good I have to say. My son smiled and you can't even get him to crack a smile even if you tried dad jokes ha.
LOL 5:40 "how long as this been in your pocket?" "A week?" "Oh, okay"
Heat up seat cover with blow dryer . Helps it when stretching
The 3 wheeler getting some TLC:
Tires
Labels and
Cover for the seat.
John's catch of the day, can't wait to see his trip to the Bearing sea to work as a green horn.
When I grew up as a kid, ('70s), one of my neighbors had one of these. The rest of us had maybe a lawnmower engine powered minibike. We were all green with envy!
Lol....the camping scene was hilarious!! Keep up the great work guys
you gotta do the soapy water trick for the stickers. you can move it around until its in place, then squeegee it and wait until it dries. and BOOM! sticker
A 42 minute video in the regular upload schedule, this is what makes you guys' channel a beautiful place, stay safe!
To get that salmon on point, ALWAYS start with the skin side down. Next time you cook you up some salmon, grab you a cast iron skillet, some fresh Thyme, butter, salt, and a little bit of cracked pepper. Sprinkle the fillet with a little salt and pepper. Throw some butter and thyme in the skillet and lay your salmon in skin side down. Grab the spoon and tilt the skillet to pool the butter and thyme. Baste the salmon by spooning on the butter. Once that skin is golden brown and crispy, flip the fillet and continue basting for about two minutes. Tell your fans how it taste! Hopefully, you'll enjoy the food as much as I enjoy your videos.
I was working on a (old school choppper) restoration project, my buddy & I were 4 months into it, then we had to apply decals. Well one of the decals was off centred by approx. 1\4 of an inch, when we decided to put it up for sale we took it to a dealership for evaluation. The gentleman in charge told us that, tHe one little glitch we made depreciated it by almost $1000.00!! Well my my buddy looked at him and told him point blank, "Bullshit!" . To make a long story short we actually made about $2500.00 more because the potential buyer appreciated the hard work we had put into it!!!! 😁😁😁
You genuinely got me with the Survival Hunting at the end. I had no idea where you were going with it, until you "caught" the salmon. I laughed so hard it scared the cat.
I'm really impressed with the Australian accent! Lol
Some parts I was convinced
As an Aussie, I was laughing my tits off. The ONLY people who can possibly do a passable Aussie accent are the Kiwis.......when they're not busy shagging sheep!
@@marktelford2160 Oi!
As an Aussie I to had a good laugh. Almost there but not quite, just like a “4 Speed Decal” lol 😂
Australian? I thought that was AUSTRIAN! LOL
Great job on the ATC 70! Don’t quit your day job for TV Survival John!!! Keep him straight Isaac!!
Hey John and Isaac,
Thanks so much for the aluminum flywheel that you included with my "Send it" hat ! Now I can soup up my MB200 without it exploding ! You guys are the best. - Jeb
Your welcome! Thanks for watching
I just want to say, Ive been watching some old videos and John has lost some weight and looking and clearly feeling better. Go John
Bit of an odd assumption to say feeling better. He seems to be as good as ever. It's not like he was ever fat.
@@SportbikerNZ no saying he was feeling bad because of weight, just he's a lot more comfortable being in front of the camera
They did make a Christmas special atc70 it was blue 🔵
That's what is was going to say I knew about those before they z50 ones
The food cooking and hunting at the end was great guys .
This video is bringing back great memories. As a kid I had an '85 ATC-125M. One friend had The fourtrax 125, 2 friends had ATC 110s, and two others had the ATC 70. years of fun times
16:53 - the longest “that’s what she said” in C&C channel history! 🤣
Using a heat gun to soften stickers and adhesives makes removing stickers and residue easier.
And WD 40
Yeah i wanted to say this
@@shaharsdechen2537 day this ???
Haha no shit, that's kinda a given
Also rubbing a drop of gas works perfect
I love how you guys were still draining the tank through the fuel line in the background when ya already had it off and coulda just poured it from the fill cap and been done 😂❤️
great show boys, love the longer format, more c&c for the win.
th-cam.com/video/TCsxxeB_t5E/w-d-xo.html
Y'all should build another turbocharged 212 or 420
YES!!!
Agreed. But just on a yard cart, build it like the oval dirt track go karts👌
Smog pump supercharged gx390
I think they should just build a new 420 in general... been a while since I've seen one on the channel
Supercharger would be better because it could actually build boost
The chain tensioner is a round wheel riding on chain links, that’s why the original was a sprocket
It also sounded like the chain was rubbing not turning the wheel on the tensioner. Sounded like something rubbing on plastic.
th-cam.com/video/TCsxxeB_t5Ey/w-d-xo.htmlt
Correct, this is a tensioner for a belt. A chain tensioner, like a timing chain tensioner on an engine is also nylon but longer and curved and would be constantly lubricated. This is not the right application.
HEY, there could be gold in your creek Jon.... I'll gladly come and help you find out if you like.... Great vid guys!
Whenever Isaac says "... and it'll be fine" it's with such sincerity and it always cracks me up.
One of the best videos I’ve watched for awhile. Keep it up guys, the content is awesome!
10 sets of ads in a 45 minute video. Holy crap, youtube has become satellite/cable.
Download the video and watch it offline, come back to comment.
Or other tricks.
@@tomstech4390 don't you have to pay for youtube premium for that?
@@SaltyCracker402 There are other websites and programs like freemake (arseholes who are progressively putting features behind paywalls limiting speeds etc) but there are other options.
There are other tricks for mobile I'm sure you'll come across, If everyone spills the beans too soon I think youtube (google) will find ways of "fixing" it sooner and then we *all* have no way around. But read enough comments and you'll find ways around.
Man you guys are great hunters and fishermen? Your talents have no boundaries...👍
The first ATC I ever saw was only 6 months old. It was a ATC 90 but belonged to a couple of thrill seeking Firemen from OKC. They had worn it out by the time I saw it and replaced that 90 with a 185 Suzuki or Yamaha engine and trans. The sticker was not original equipment since they would get all lit up and play (you know Firemen always follow safety rules "wink *wink"). The object was to be able to stay on and not spill your beer. When you were the passenger, that was not as easy as you would think. Luckily they would do it in the sand and no one was hurt. They also drag raced a 56 F100, flew hang gliders and had several "sand" toys. BTW You need a "Dutch Oven" for camp cooking and on top of the stove in the shop.
I love the hunting bit 😂
th-cam.com/video/TCsxxeB_t5E/w-d-xo.html
@@Hitycooking bud. Don't advertise on other people's channels. It's rude.
No1 on here you guys are legends always waiting for new vids inspired me and a friend to start building cool toys
Thoroughly enjoyed this video. Thanks for all the good times
With all do respect the last part of this video was some of the best stuff you have done. My wife and I were laughing our heads off!!!... but all the content is great . Love watching yall!!
WD-40 works great for removing adhesive from paint without harming the paint
I think they needed something next level.
Why don’t you guys ever take things all the way apart before painting?
I'm shakin' my head the whole time...
They do sometimes
I was expecting them to at least media blasting it before painting or powdercoating the frame.
He seems a bit organized behind the scenes and so he likely only puts x amount of time into each video to stay on schedule
@@JetSkiBuyFixPlaySellChannel it’s cars and cameras what do you expect? I love these guys but they aren’t the best for quality work
Thanks for the time and effort entertaining and motivating us
36 years old and you can still get parts for them? Amazing! I can't even find a decorative light bulb for my bathroom without buying 16 to keep them all the same.
“Doesn’t this have a 150lbs capacity.....?” “Ya so.......?” I’m dying over here!!! 🤣
The food looked good untill i saw the asparagus! Yuk!
I’ve been watching you guys since you guys started I wanna show you my homemade three wheel trike
I'm not sure if its age, or quality of content. But that was the absolute best BBQ add I have ever seen. Great video guys :)
I remember back in the day, I had a Honda 70, along with about 7 of my school buddies my friends dad was a Machinist at air research, we jacked those 70s with stroker cranks, bored out, cams, headers over sized carb, headers. 3 speed to4. Changed the front sprocket.
To top it all off put a little alcohol in the tank. Most definitely ur helmet.
What else can I say scary fast on 3 wheels. Have fun with ur restoration
There was a moment right after you put it up on the table that Ike was just sitting there looking like his wheels were turning. And all I could think was "can we make this a mini bike?"
Thought same thing
th-cam.com/video/TCsxxeB_t5E/w-d-xo.html
I’ve been watching you guys since you guys started I love everything you guys do keep up the good work I have a passion for the same thing you do I love it I would like to show you my three wheel trike
Too funny with the fishing and hunting segment. A+ in my book !!
And the Honda looks great ! ***
This hits close to the heart. The Honda ATC 70 was the first "dirt bike" I ever got to ride. First time out I crashed into a tree because they steer so weird. LOL! Keep up the great work!
Where did u get the plastics
FYI - Rubbing alcohol removes sticker glue like a champ!
Another one..... Car wax works great!!
I use wd-40 and a scotchbrite pad
If you want no tarnishing of a clear coat or scratches on windows you can use either baby oil or mineral oil, they break adhesive down quite nice.
@@TuttleScott Tell ya what- WD-40 works great for removing grease pencil marks off thrift shop items. Its like magic
91% or 99% Rubbing Alcohol works best
Very good guys. One of your best! I smiled and laughed a few times.
I must hear more on this firepit!
I’d send you guys a bunch of 3M stuff but you’ve never replied to my offer, then I see you buying scotchbrite and shake my head. Oh well, money is no object I guess!
Great job, looks great.
Hello
It'll be fine. No need to push it.
John always cook fish skin side down first..
Love the catchNcook great vid
Agreed!! Skin first!
The fishing made me giggle 😂👍👌
Man you guys have the perfect property for Rc 1/10 scale trail riding especially with that little creek to drive through
I would like to show y’all some of my projects
That catch and cook was hilarious you guys killed it again!!!! The atc 70 looks great, can't wait for them tires to come in!!
Cooking expedition was hilarious 😂
Now I want to see y'all catch and cook a squirrel 🤣
At least the grill will come in handy for the subscriber cook out lol
@23:53 A time proven trick is to put Baby oil on some paper towel so it is soaked do this all on the Glue to be removed, let set over night. As a rule all of the glue will just wipe off. Not always but 80-90% of the time. Love your guys fun, and how good of friends you two are. Keep up the good work. Chain tensioner: You can remove the old cog from your old chain tensioner, and replace it with a new skate board wheel, they work great, and last a very long time ,and are cheap to replace.
I would love to see an episode where John, Ike, and friends go on like a week camping trip with friends, I think that would be awesome, brig out all there toys, go fishing, ripping, and vibing in the woods.
They've done it before. It's how they got the idea for the bronco because the guy who owns the grave ninja was on that trip. They drive their own vehicles up a mountain and pull mini trailers with their camping equipment so they can camp on top.
I grabbed a 1984 70 from my grandparents house. hopefully will be able to ride it soon.
Paint fumes are good for the mind when building stuff. :)
Great video! I still have my 1978 ATC 70. With an SL70 motor 4 speed with a manual clutch big carb one off exhaust and twist throttle. You’ve inspired me to bring it back to life.
You clowns are hilarious. Not many people get to have the time of their lives for a living. Keep up the good work! :)
Makes me miss the heck out of my early '80s125 CC Honda let my older cousin borrow it one year for hunting come back with a bit of plastic on the fenders barbed wire wrapped around the axle Alice just say there was water and mud in places that nobody knew water and mud could get I was like dang thanks cuz never seen that dude again either, y'all guys make incredibly entertaining educational how to's and sometimes boo boos of the all-terrain vehicle AKA all-terrain cycle knuckle busting crew.... Let's get it back Honda Red.......
for de stickering, there is this stuff we use for refinishing cabinet doors when we need to take off the bumpers and factory stickers. It works really well. Its called Wax Wash, from Mohawk comes in a spray can. 👍
Hi I’m 13 and I have Ben working on a 1984 Honda act and watching your videos has helped a lot thanks
Best episode. Isaac throwing knife outta leaf pile was so fitting.
Looks like y’all had a good time at the end of the video.👍
Really enjoyed this one, and the "camping" creativity was great!
Never had a bad reaction from brake cleaner and bodywork. De-stickered all my past bikes/cars with the stuff. And I use it before pulling the sticker. So the whole sticker is easier to remove and usually brings the glue with it 🙌
I use a regular deck of poker cards tucked around the rim with the tire deflated to paint rims .Makes for a perfect paint job on the rims and easier to get under the rim instead of using just blue tape. BTW...Awesome channel!!!!
LETS GO WE GOT A 42 MINUTE VIDEO IM STOKED
I love watching ur builds but that campin expedition was the best part
I love the three-wheeler and the "Man Vs. Wild" bit.
These videos are so therapeutic to watch, very relaxing
I generally check you guys out for the fun projects, but the camping/fishing skit was funny as hell. I say do more unrelated skits. Cheers!
I went through quite a few of them tensioners on my atc 110 when i was younger. I ended up removing the old wore out sprocket and bolting a piece of hardwood on the tensioner inplace of the tiny sprocket for the chain to ride on. Worked better than expected. Pretty certain it is still on it.
The fuel tank sealer works great even if you have small holes, tape em off and pour as usual, we did some old tanks that should have been thrown out.
Just now watching this. The 70 looks amazing....seriously...nice work! But, my favorite part is the "hunting" and the slo-mo shots of Ike eating LOL!! First funnel cakes....now burgers! Pretty darn good Aussie accent too, mate!
Honda atc 90 or 110 neck low and comes out the side or 125 been a long time but that's what I used when we built 70 s 20 years ago brings back so many good memories keep up great work
Y'all are closing in on the 1M mark 👍 I ordered some merch today from your store to advertise to help you to get there.
Brings back many memories of my Mini Trail 50 cc I had as a kid. Best bike I ever had, It always ran when every thing else broke Bulletproof! Took it camping all the time lived in Colorado went anywhere I wanted to. Great video and content guys!!!! Keep up the good work fellow Tar Heels. Or maybe it's Pirates!
Ok I looked through quite a few comments to see if someone already told you but I didn't see it. I use a spray bottle with water mixed with rubbing alcohol. I mix around 1 part alcohol to 3 parts water. It makes it so that you can move it around til you get it where you want. No worries about getting soap out, alcohol will dry up clear.
Man I remember having one of these when I was a kid love that little 3 wheeler I'm 43 now brings back memories
This project is probably my favorite. I freaking love atc70s
I like these longer vids. Man that cookup looked so good.
What a laid-back episode! Loved it!
put the decals on the tank and then clear coat it , makes nice smooth edges on the decals
I like to use rustoulem paint takes time to dry tho. It has gone up in price. It’s hard to find the .99 wallmart black anymore.
Use a 2k automotive spray clear with hardener over stickers on fuel tank. You will not be disappointed very durable and can be easily purchased on Amazon for about $20. Way better than regular spray clear.
Nois Mates! Loved the pro length Japanese octagonal fly rod and hand reel.
Dang it Bobby ! After watching the Salmon cooking, now I'm hungry! ( the three wheeler is looking like it belongs in a showroom! Great job, as always guys!)
Yes they did an ATC 70 Christmas special, 1983, I have always wanted one, only seen one for sale in a long time and it was trashed for 1800, I think the plastics on yours were changed at some point to older stuff like an 83 or something, 85 had a blue seat
Back in the late 70s, my dad's friend Charlie had a brand new ATC 90, and a brand new GMC Gentleman Jim (black and gold, sort of a Smokey and the Bandit TRUCK) pickup. He let me try out the ATC. I gave it too much gas, which makes the front end light and even harder to steer. I went straight into the side of the GMC. A GMC/ATC interface. Minor damage to the truck (I say minor, cuz it wasn't mine). To this day, I've never TRIED to ride another 3 wheeler.
Dude's
This is one of the funniest videos you guy's done yet...
Keep it up
WD-40 is a miracle worker on de-stickering especially for those old crispy ones, in my experience it gets the glue and all off better than brake cleaner or alcohol.