How to fix LG washer FE code. Washer not draining. model wm2487hwma.

How to fix LG washer FE error code. Washer not draining. How to fix your lg washers water inlet valves. Easy step by step LG front load washer fe code step by step on how to replace your water inlet valves that cause the machine to overfill. This video will show you how to fix your washers when water is overfilling and not draining. Repairs for LG Front load washer model number wm2487hwma will also work on most other LG front load washers

[@JHKProduce]

Great Step by step video. Thank you for doing this.

[@JackofAllCarbinc]

Thank you, Glad it helped.

[@JackofAllCarbinc]

Glad it was helpful!

[@susancarroll3753]

Good morning, this code came on the first time the machine was turned on. Do you have any insight as to why? Does it need a full repair? Thank you, Susan

[@JackofAllCarbinc]

If machine is brand new its probably just running thru the program......if its used then the machine might need repair. I would just go thru the first few steps from video/ check the little soap dispenser area for obstructions and check the filter, also if new make sure that there were no plugs that needed to get removed from the water inlet lines. Please keep us posted if you can figure out and hopefully will help others.......Silly question but did you verify the water was turned on and all the way ? if its not getting water might also give code .

[@AustinMann-nu8qf]

What are the part numbers for the inlet valves?

[@JackofAllCarbinc]

for the hot water its part number oem 5220fr2006h
For cold water oem part number 5220fr2008f

[@DeniseGolyer-jw4ug]

Hi there are no part numbers please send this information for the FE code for the washer machine. Thank you

[@JackofAllCarbinc]

for the hot water its part number oem 5220fr2006h
For cold water oem part number 5220fr2008f

[@neoappraisal]

The power button only works after i unplug the washer first then plug it in again. What would cause this? Everything else works after I unplug it then plug it in. I have not done any other work on the machine.

[@JackofAllCarbinc]

are you getting the fe code or what code do you get?

[@neoappraisal]

No code was displayed. It simply will not power up unless I flip the breaker to the machine and then flip it back on then it powers up and everything works! If I then push the power button to turn the machine off and wait typically about 5-7 minutes, then I have to go to the breaker and start all over again. I am wondering if the problem is with the noise filter? @@JackofAllCarbinc

[@JackofAllCarbinc]

Got it....sorry but have not come across that issue before so no idea why it would do that. @@neoappraisal

[@neoappraisal]

Thanks for looking into this. I appreciate your video and expertise @@JackofAllCarbinc