4Runner Winch Bumper Install (Step by Step Version):Why I think Hefty Fabworks is the BEST Choice!
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- This is the Step by Step version of the 4Runner Hefty Fabworks winch bumper. I will be adding a winch when I figure out which one I want.
Install was pretty straightforward. If you have questions or comments leave them below please.
Hefty Fabworks Banshee Bumper:
heftyfab.com/p...
20 Inch Light Bar (Amber):
*amzn.to/3FYPaEf
*All current Mods:
AUTOBOTS Tow Hitch Receiver
amzn.to/385BhY2
Stay There 3'' × 20ft Heavy Duty Tow Strap Recovery Kit
amzn.to/3N4fW0j
HyperDip Wheel Kit:
amzn.to/3LHnNR5
or
www.dipyourcar...?ref=891
Voodonala for 4Runner Side Door Storage Box
amzn.to/3LH8OX8
JDMCAR Compatible with Center Console Organizer
amzn.to/3vV0Oey
PAVONI Car Inflatable Air Camping Mattress Pad
amzn.to/3s7Pk6n
Qualizzi Protective Sunscreen
amzn.to/3LHpRsj
YITAMOTOR Floor Mats
amzn.to/3kBg5fq
LFD Rock Sliders:
lfdoffroad.com...
Canvasback Cargo Protector
www.canvasback...
Westcott Deigns Ladder
westcottdesign...
Video Equipment Used:
Pixel 6 Pro Phone
amzn.to/3Fk4BGD
GoPro HERO7 Black
amzn.to/3ycy9o9
Rode Wireless Go - Compact Wireless Microphone
amzn.to/39INhQ1
Tripod Mount Accessory Kits
amzn.to/3vIfK0L
*this channel may receive a small commission when ordering from certain links. Thank you for your support
![“อาร์ต พศุตม์” เกือบเอี่ยวทุกคดีดัง เอ๊ะไว้ก่อน ไม่มีอะไรได้มาง่ายๆ | แฉ 16 ต.ค. 67 [2/3] | GMM25](http://i.ytimg.com/vi/0Gx-0-kUBv8/mqdefault.jpg)
I've also done a shorter version with a brief overview on install and walkaround if you are not into the step by step. Check that one out here:
th-cam.com/video/kad3tFnPnY0/w-d-xo.html&ab_channel=AZOverland
Hefty Fabworks Banshee Bumper:
heftyfab.com/products/2014-4runner-low-profile-banshee-bumper-winch-ready
20 Inch Light Bar (Amber)
amzn.to/3FYPaEf
I like that you make two videos on the products you use. Sometimes I want a quick over view and sometimes I'm looking for detailed instructions. It's good to have the option to have either...or both!
I appreciate the feedback. It's a lot of work but I figured that is what I would want when looking through videos...an Option!
That's a great system. I'm so glad that you removed those shackles from the tie-down points. Those are only meant for securing the vehicle during towing and not extraction.
Thanks! They were just in their "holding place" until I got the bumper in. Needed a little bling😀
i really appreciate of the time you take this video to show all of us . that is my plan to do same you are doing. thank you
Good luck!
What model
Bumper is that
Hefty Fabworks Banshee bumper
heftyfab.com/products/2014-4runner-low-profile-banshee-bumper-winch-ready
What year is your 4Runner? I have a 2020 sr5 and I want to cut the middle of the bumper without removing it from the car. Just not sure if I have fog light wiring running through that area.
@@matthewsarkis3856 2017 SR5
Great video. I just watched it so I’m about a year late LOL. But thanks to your video I just tapped the brakes on ordering a CaliRaised or GreenLane bumper. I had it basically narrowed down to those two but now I absolutely love the idea of a “skeleton” and a “shell” since I’m pretty undecided about which winch I want. So this product fits the bill perfectly so thank you for introducing it to us! I just subscribed to your channel so I’ll search through for any updates as well as which winch you went with.
Thanks for the comment! I did a video where I mounted a Warn winch to this bumper. Link is below:
th-cam.com/video/iMk0vd5oi44/w-d-xo.htmlsi=TgVOro7cNJsas5Yt
Thanks for showing us your knowledge very appreciated 👍🏼
Thanks for watching!
Thanks for the detailed install, that helps
Absolutely
Looks good. Do you think it may affect 4Runners with the front sensor?
I would double check with Hefty Family, but I don't think it does with the low bar. I think the high bar they offer does.
Just got a 23 4runner and this is my first 4 runner ever, so excited. Found your channel and instantly became a fan. Feels like a perfect "4 runner Dad"! LOL. Would you recommend this installation to a first-time mod customer (like myself)? Do you think the weight affected the MPG at all? Thanks in advance!!
Thank you! This is a great vehicle, I'm sure you'll love it. I would say that if you have experience, and are handy with tools, this is doable. If not, you may want to get help. I have a lot of auto mechanic and auto body experience, so this was not really a difficult install. I chose this bumper because it was a bit lighter than most of the aftermarket bumpers out now, so I didn't really notice a drop in gas mileage. When I add the wich soon, that may certainly affect mph.
@@AZOverland2017 Thank you so much!!
Do you know the item number for the optional bulbar?
On the link I sent, under the "Hoop" option (bull bar), I got the Low Hoop
Great work!did you upgrade your front coil over shocks?that bumper is like 70-80lbs.
Thanks! I haven't yet. If I remember correctly I think this bumper is 65 lbs because it has the aluminum cover and bull bar. I think the OEM bumper support I removed was in the 20 lb range. So, not a huge amount of weight added. When the winch goes in I will certainly look deeper into upgrading the suspension. Also, I weigh like 145 lbs 😂
@@AZOverland2017 my buddies friend took off his C4 low pro coz it causes more nose dive when turning or braking but he said he’ll put it back until he upgrade’s his suspension he said his C4 weighs like 80-85lbs material is steel..
@@rupertgumban9251 Interesting, thanks for that information
Molle panel for the third row!
Did you install the winch yet?
Video coming soon for the new winch install. Stay tuned...
Too complicated. I have 2023 4Runner Trdoffroad. I wouldn’t mess with the cutting my 4Runner.
Complicated for some, easy for others. I've worked on and modified cars for a lot of years. To me, this was a very straightforward and relatively simple install. Winch is ordered and coming soon. Stay tuned for the install. Good luck with the new 4Runner!
Mistakes can lead to more mods.
This mod looks great. For the guy saying he wouldn’t mess with cutting his 4Runner, how would you get a winch installed without cutting? Or running 285s should have to do a BMC. For you it’s complicated, for others like him that have done this sort of stuff, it’s normal, necessary, and not too complicated to complete. Love the video and want to run the same. I’ll be getting a 2” front and 1” rear and enough to hold the weight of the bumper and winch.